user/sven/linux.git/kernel/time/hrtimer.c, branch v5.13.19

hrtimer: Ensure timerfd notification for HIGHRES=n

2021-09-15T08:00:28Z

[ Upstream commit 8c3b5e6ec0fee18bc2ce38d1dfe913413205f908 ] If high resolution timers are disabled the timerfd notification about a clock was set event is not happening for all cases which use clock_was_set_delayed() because that's a NOP for HIGHRES=n, which is wrong. Make clock_was_set_delayed() unconditially available to fix that. Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210713135158.196661266@linutronix.de Signed-off-by: Sasha Levin

hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns()

2021-09-15T08:00:28Z

[ Upstream commit 627ef5ae2df8eeccb20d5af0e4cfa4df9e61ed28 ] If __hrtimer_start_range_ns() is invoked with an already armed hrtimer then the timer has to be canceled first and then added back. If the timer is the first expiring timer then on removal the clockevent device is reprogrammed to the next expiring timer to avoid that the pending expiry fires needlessly. If the new expiry time ends up to be the first expiry again then the clock event device has to reprogrammed again. Avoid this by checking whether the timer is the first to expire and in that case, keep the timer on the current CPU and delay the reprogramming up to the point where the timer has been enqueued again. Reported-by: Lorenzo Colitti Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210713135157.873137732@linutronix.de Signed-off-by: Sasha Levin

Merge tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-04-26T16:54:03Z

Pull timer updates from Thomas Gleixner: "The time and timers updates contain: Core changes: - Allow runtime power management when the clocksource is changed. - A correctness fix for clock_adjtime32() so that the return value on success is not overwritten by the result of the copy to user. - Allow late installment of broadcast clockevent devices which was broken because nothing switched them over to oneshot mode. This went unnoticed so far because clockevent devices used to be built in, but now people started to make them modular. - Debugfs related simplifications - Small cleanups and improvements here and there Driver changes: - The usual set of device tree binding updates for a wide range of drivers/devices. - The usual updates and improvements for drivers all over the place but nothing outstanding. - No new clocksource/event drivers. They'll come back next time" * tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) posix-timers: Preserve return value in clock_adjtime32() tick/broadcast: Allow late registered device to enter oneshot mode tick: Use tick_check_replacement() instead of open coding it time/timecounter: Mark 1st argument of timecounter_cyc2time() as const dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940 clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak clocksource/drivers/npcm: Add support for WPCM450 clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3 clocksource/drivers/pistachio: Fix trivial typo clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe() clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped clocksource/drivers/timer-ti-dm: Fix posted mode status check order dt-bindings: timer: renesas,cmt: Document R8A77961 dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support clocksource/drivers/ingenic-ost: Add support for the JZ4760B clocksource/drivers/ingenic: Add support for the JZ4760 dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B) ...

timekeeping, clocksource: Fix various typos in comments

2021-03-22T22:06:48Z

Fix ~56 single-word typos in timekeeping & clocksource code comments. Signed-off-by: Ingo Molnar Cc: Thomas Gleixner Cc: John Stultz Cc: Stephen Boyd Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org

kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()

2021-03-16T21:13:10Z

Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT. Add a new helper which sets restart_block->fn and calls a dummy arch_set_restart_data() helper. Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code") Signed-off-by: Oleg Nesterov Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com

hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()

2021-03-08T08:37:01Z

hrtimer_force_reprogram() and hrtimer_interrupt() invokes __hrtimer_get_next_event() to find the earliest expiry time of hrtimer bases. __hrtimer_get_next_event() does not update cpu_base::[softirq_]_expires_next to preserve reprogramming logic. That needs to be done at the callsites. hrtimer_force_reprogram() updates cpu_base::softirq_expires_next only when the first expiring timer is a softirq timer and the soft interrupt is not activated. That's wrong because cpu_base::softirq_expires_next is left stale when the first expiring timer of all bases is a timer which expires in hard interrupt context. hrtimer_interrupt() does never update cpu_base::softirq_expires_next which is wrong too. That becomes a problem when clock_settime() sets CLOCK_REALTIME forward and the first soft expiring timer is in the CLOCK_REALTIME_SOFT base. Setting CLOCK_REALTIME forward moves the clock MONOTONIC based expiry time of that timer before the stale cpu_base::softirq_expires_next. cpu_base::softirq_expires_next is cached to make the check for raising the soft interrupt fast. In the above case the soft interrupt won't be raised until clock monotonic reaches the stale cpu_base::softirq_expires_next value. That's incorrect, but what's worse it that if the softirq timer becomes the first expiring timer of all clock bases after the hard expiry timer has been handled the reprogramming of the clockevent from hrtimer_interrupt() will result in an interrupt storm. That happens because the reprogramming does not use cpu_base::softirq_expires_next, it uses __hrtimer_get_next_event() which returns the actual expiry time. Once clock MONOTONIC reaches cpu_base::softirq_expires_next the soft interrupt is raised and the storm subsides. Change the logic in hrtimer_force_reprogram() to evaluate the soft and hard bases seperately, update softirq_expires_next and handle the case when a soft expiring timer is the first of all bases by comparing the expiry times and updating the required cpu base fields. Split this functionality into a separate function to be able to use it in hrtimer_interrupt() as well without copy paste. Fixes: 5da70160462e ("hrtimer: Implement support for softirq based hrtimers") Reported-by: Mikael Beckius Suggested-by: Thomas Gleixner Tested-by: Mikael Beckius Signed-off-by: Anna-Maria Behnsen Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20210223160240.27518-1-anna-maria@linutronix.de

Merge tag 'timers-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-12-15T02:21:14Z

Pull timers and timekeeping updates from Thomas Gleixner: "Core: - Robustness improvements for the NOHZ tick management - Fixes and consolidation of the NTP/RTC synchronization code - Small fixes and improvements in various places - A set of function documentation udpates and fixes Drivers: - Cleanups and improvements in various clocksoure/event drivers - Removal of the EZChip NPS clocksource driver as the platfrom support was removed from ARC - The usual set of new device tree binding and json conversions - The RTC driver which have been acked by the RTC maintainer: * fix a long standing bug in the MC146818 library code which can cause reading garbage during the RTC internal update. * changes related to the NTP/RTC consolidation work" * tag 'timers-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) ntp: Fix prototype in the !CONFIG_GENERIC_CMOS_UPDATE case tick/sched: Make jiffies update quick check more robust ntp: Consolidate the RTC update implementation ntp: Make the RTC sync offset less obscure ntp, rtc: Move rtc_set_ntp_time() to ntp code ntp: Make the RTC synchronization more reliable rtc: core: Make the sync offset default more realistic rtc: cmos: Make rtc_cmos sync offset correct rtc: mc146818: Reduce spinlock section in mc146818_set_time() rtc: mc146818: Prevent reading garbage clocksource/drivers/sh_cmt: Fix potential deadlock when calling runtime PM clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sne clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBI clocksource/drivers/ingenic: Fix section mismatch clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent() dt-bindings: timer: renesas: tmu: Convert to json-schema dt-bindings: timer: renesas: tmu: Document r8a774e1 bindings clocksource/drivers/orion: Add missing clk_disable_unprepare() on error path ...

hrtimer: Fix kernel-doc markups

2020-11-16T14:20:01Z

The hrtimer_get_remaining() markup is documenting, instead, __hrtimer_get_remaining(), as it is placed at the C file. In order to properly document it, a kernel-doc markup is needed together with the function prototype. So, add a new one, while preserving the existing one, just fixing the function name. The hrtimer_is_queued prototype has a typo: it is using '=' instead of '-' to split: identifier - description as required by kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/9dc87808c2fd07b7e050bafcd033c5ef05808fea.1605521731.git.mchehab+huawei@kernel.org

hrtimer: Remove unused inline function debug_hrtimer_free()

2020-10-26T10:39:21Z

There is no caller in tree, remove it. Signed-off-by: YueHaibing Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20200909134850.21940-1-yuehaibing@huawei.com

treewide: Make all debug_obj_descriptors const

2020-09-24T19:56:25Z

This should make it harder for the kernel to corrupt the debug object descriptor, used to call functions to fixup state and track debug objects, by moving the structure to read-only memory. Signed-off-by: Stephen Boyd Signed-off-by: Thomas Gleixner Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org