user/sven/linux.git/kernel/time/ntp.c, branch v5.2.2

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-05-16T18:00:20Z

Pull time fixes from Ingo Molnar: "A TIA adjtimex interface extension, and a POSIX compliance ABI fix for timespec64 users" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Allow TAI-UTC offset to be set to zero y2038: Make CONFIG_64BIT_TIME unconditional

ntp: Allow TAI-UTC offset to be set to zero

2019-05-09T08:46:58Z

The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock. It is typically set by NTP/PTP implementations and it is automatically updated by the kernel on leap seconds. The initial value is zero (which applications may interpret as unknown), but this value cannot be set by adjtimex. This limitation seems to go back to the original "nanokernel" implementation by David Mills. Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in order to allow setting it back to the initial value. Fixes: 153b5d054ac2 ("ntp: support for TAI") Suggested-by: Ondrej Mosnacek Signed-off-by: Miroslav Lichvar Signed-off-by: Thomas Gleixner Cc: John Stultz Cc: Richard Cochran Cc: Prarit Bhargava Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com

ntp: Audit NTP parameters adjustment

2019-04-15T22:14:01Z

Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek Reviewed-by: Richard Guy Briggs Reviewed-by: Thomas Gleixner Signed-off-by: Paul Moore

timex: use __kernel_timex internally

2019-02-06T23:13:27Z

struct timex is not y2038 safe. Replace all uses of timex with y2038 safe __kernel_timex. Note that struct __kernel_timex is an ABI interface definition. We could define a new structure based on __kernel_timex that is only available internally instead. Right now, there isn't a strong motivation for this as the structure is isolated to a few defined struct timex interfaces and such a structure would be exactly the same as struct timex. The patch was generated by the following coccinelle script: virtual patch @depends on patch forall@ identifier ts; expression e; @@ ( - struct timex ts; + struct __kernel_timex ts; | - struct timex ts = {}; + struct __kernel_timex ts = {}; | - struct timex ts = e; + struct __kernel_timex ts = e; | - struct timex *ts; + struct __kernel_timex *ts; | (memset \| copy_from_user \| copy_to_user \)(..., - sizeof(struct timex)) + sizeof(struct __kernel_timex)) ) @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts, + struct __kernel_timex *ts, ...) { ... } @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts) { + struct __kernel_timex *ts) { ... } Signed-off-by: Deepa Dinamani Cc: linux-alpha@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

2018-12-28T20:45:04Z

Pull y2038 updates from Arnd Bergmann: "More syscalls and cleanups This concludes the main part of the system call rework for 64-bit time_t, which has spread over most of year 2018, the last six system calls being - ppoll - pselect6 - io_pgetevents - recvmmsg - futex - rt_sigtimedwait As before, nothing changes for 64-bit architectures, while 32-bit architectures gain another entry point that differs only in the layout of the timespec structure. Hopefully in the next release we can wire up all 22 of those system calls on all 32-bit architectures, which gives us a baseline version for glibc to start using them. This does not include the clock_adjtime, getrusage/waitid, and getitimer/setitimer system calls. I still plan to have new versions of those as well, but they are not required for correct operation of the C library since they can be emulated using the old 32-bit time_t based system calls. Aside from the system calls, there are also a few cleanups here, removing old kernel internal interfaces that have become unused after all references got removed. The arch/sh cleanups are part of this, there were posted several times over the past year without a reaction from the maintainers, while the corresponding changes made it into all other architectures" * tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: timekeeping: remove obsolete time accessors vfs: replace current_kernel_time64 with ktime equivalent timekeeping: remove timespec_add/timespec_del timekeeping: remove unused {read,update}_persistent_clock sh: remove board_time_init() callback sh: remove unused rtc_sh_get/set_time infrastructure sh: sh03: rtc: push down rtc class ops into driver sh: dreamcast: rtc: push down rtc class ops into driver y2038: signal: Add compat_sys_rt_sigtimedwait_time64 y2038: signal: Add sys_rt_sigtimedwait_time32 y2038: socket: Add compat_sys_recvmmsg_time64 y2038: futex: Add support for __kernel_timespec y2038: futex: Move compat implementation into futex.c io_pgetevents: use __kernel_timespec pselect6: use __kernel_timespec ppoll: use __kernel_timespec signal: Add restore_user_sigmask() signal: Add set_user_sigmask()

timekeeping: remove unused {read,update}_persistent_clock

2018-12-18T15:13:05Z

After arch/sh has removed the last reference to these functions, we can remove them completely and just rely on the 64-bit time_t based versions. This cleans up a rather ugly use of __weak functions. Signed-off-by: Arnd Bergmann Acked-by: John Stultz

ntp: Remove duplicated include

2018-12-18T11:59:33Z

Signed-off-by: YueHaibing Signed-off-by: Thomas Gleixner Cc: Cc: Link: https://lkml.kernel.org/r/20181209062225.4344-1-yuehaibing@huawei.com

timekeeping/ntp: Constify some function arguments

2018-07-20T00:08:05Z

Add 'const' to some function arguments and variables to make it easier to read the code. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Miroslav Lichvar Cc: Richard Cochran Cc: Prarit Bhargava Cc: Stephen Boyd Signed-off-by: Ondrej Mosnacek [jstultz: Also fixup pre-existing checkpatch warnings for prototype arguments with no variable name] Signed-off-by: John Stultz

ntp: Use kstrtos64 for s64 variable

2018-07-19T21:58:37Z

...instead of kstrtol with a dirty cast. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Miroslav Lichvar Cc: Richard Cochran Cc: Prarit Bhargava Cc: Stephen Boyd Signed-off-by: Ondrej Mosnacek Signed-off-by: John Stultz

ntp: Remove redundant arguments

2018-07-19T21:58:29Z

The 'ts' argument of process_adj_status() and process_adjtimex_modes() is unused and can be safely removed. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Miroslav Lichvar Cc: Richard Cochran Cc: Prarit Bhargava Cc: Stephen Boyd Signed-off-by: Ondrej Mosnacek Signed-off-by: John Stultz