user/sven/linux.git/kernel/time/timer_list.c, branch v4.9.186

timer/debug: Change /proc/timer_list from 0444 to 0400

2018-12-21T13:11:30Z

[ Upstream commit 8e7df2b5b7f245c9bd11064712db5cb69044a362 ] While it uses %pK, there's still few reasons to read this file as non-root. Suggested-by: Linus Torvalds Acked-by: Thomas Gleixner Cc: Peter Zijlstra Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

sysrq: Reset the watchdog timers while displaying high-resolution timers

2018-03-22T08:17:42Z

[ Upstream commit 0107042768658fea9f5f5a9c00b1c90f5dab6a06 ] On systems with a large number of CPUs, running sysrq- can cause watchdog timeouts. There are two slow sections of code in the sysrq- path in timer_list.c. 1. print_active_timers() - This function is called by print_cpu() and contains a slow goto loop. On a machine with hundreds of CPUs, this loop took approximately 100ms for the first CPU in a NUMA node. (Subsequent CPUs in the same node ran much quicker.) The total time to print all of the CPUs is ultimately long enough to trigger the soft lockup watchdog. 2. print_tickdevice() - This function outputs a large amount of textual information. This function also took approximately 100ms per CPU. Since sysrq- is not a performance critical path, there should be no harm in touching the nmi watchdog in both slow sections above. Touching it in just one location was insufficient on systems with hundreds of CPUs as occasional timeouts were still observed during testing. This issue was observed on an Oracle T7 machine with 128 CPUs, but I anticipate it may affect other systems with similarly large numbers of CPUs. Signed-off-by: Tom Hromatka Reviewed-by: Rob Gardner Signed-off-by: John Stultz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hrtimer: Handle remaining time proper for TIME_LOW_RES

2016-01-17T10:13:55Z

If CONFIG_TIME_LOW_RES is enabled we add a jiffie to the relative timeout to prevent short sleeps, but we do not account for that in interfaces which retrieve the remaining time. Helge observed that timerfd can return a remaining time larger than the relative timeout. That's not expected and breaks userland test programs. Store the information that the timer was armed relative and provide functions to adjust the remaining time. To avoid bloating the hrtimer struct make state a u8, which as a bonus results in better code on x86 at least. Reported-and-tested-by: Helge Deller Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: John Stultz Cc: linux-m68k@lists.linux-m68k.org Cc: dhowells@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160114164159.273328486@linutronix.de Signed-off-by: Thomas Gleixner

clockevents: Remove unused set_mode() callback

2015-09-14T09:00:55Z

All users are migrated to the per-state callbacks, get rid of the unused interface and the core support code. Signed-off-by: Viresh Kumar Signed-off-by: Thomas Gleixner Cc: linaro-kernel@lists.linaro.org Cc: John Stultz Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/fd60de14cf6d125489c031207567bb255ad946f6.1441943991.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar

timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers

2015-08-17T18:23:31Z

I noticed for non-monotonic timers in timer_list, some of the output looked a little confusing. For example: #1: <0000000000000000>, posix_timer_fn, S:01, hrtimer_start_range_ns, leap-a-day/2360 # expires at 1434412800000000000-1434412800000000000 nsecs [in 1434410725062375469 to 1434410725062375469 nsecs] You'll note the relative time till the expiration "[in xxx to yyy nsecs]" is incorrect. This is because its printing the delta between CLOCK_MONOTONIC time to the CLOCK_REALTIME expiration. This patch fixes this issue by adding the clock offset to the "now" time which we use to calculate the delta. Cc: Prarit Bhargava Cc: Daniel Bristot de Oliveira Cc: Richard Cochran Cc: Jan Kara Cc: Jiri Bohac Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Shuah Khan Signed-off-by: John Stultz

timer: Reduce timer migration overhead if disabled

2015-06-19T13:18:28Z

Eric reported that the timer_migration sysctl is not really nice performance wise as it needs to check at every timer insertion whether the feature is enabled or not. Further the check does not live in the timer code, so we have an extra function call which checks an extra cache line to figure out that it is disabled. We can do better and store that information in the per cpu (hr)timer bases. I pondered to use a static key, but that's a nightmare to update from the nohz code and the timer base cache line is hot anyway when we select a timer base. The old logic enabled the timer migration unconditionally if CONFIG_NO_HZ was set even if nohz was disabled on the kernel command line. With this modification, we start off with migration disabled. The user visible sysctl is still set to enabled. If the kernel switches to NOHZ migration is enabled, if the user did not disable it via the sysctl prior to the switch. If nohz=off is on the kernel command line, migration stays disabled no matter what. Before: 47.76% hog [.] main 14.84% [kernel] [k] _raw_spin_lock_irqsave 9.55% [kernel] [k] _raw_spin_unlock_irqrestore 6.71% [kernel] [k] mod_timer 6.24% [kernel] [k] lock_timer_base.isra.38 3.76% [kernel] [k] detach_if_pending 3.71% [kernel] [k] del_timer 2.50% [kernel] [k] internal_add_timer 1.51% [kernel] [k] get_nohz_timer_target 1.28% [kernel] [k] __internal_add_timer 0.78% [kernel] [k] timerfn 0.48% [kernel] [k] wake_up_nohz_cpu After: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu Reported-by: Eric Dumazet Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Paul McKenney Cc: Frederic Weisbecker Cc: Viresh Kumar Cc: John Stultz Cc: Joonwoo Park Cc: Wenbo Wang Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de Signed-off-by: Thomas Gleixner

clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state

2015-05-19T14:18:02Z

When no timers/hrtimers are pending, the expiry time is set to a special value: 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. When 'expiry == KTIME_MAX', we either cancel the 'tick-sched' hrtimer (NOHZ_MODE_HIGHRES) or skip reprogramming clockevent device (NOHZ_MODE_LOWRES). But, the clockevent device is already reprogrammed from the tick-handler for next tick. As the clock event device is programmed in ONESHOT mode it will at least fire one more time (unnecessarily). Timers on few implementations (like arm_arch_timer, etc.) only support PERIODIC mode and their drivers emulate ONESHOT over that. Which means that on these platforms we will get spurious interrupts periodically (at last programmed interval rate, normally tick rate). In order to avoid spurious interrupts, the clockevent device should be stopped or its interrupts should be masked. A simple (yet hacky) solution to get this fixed could be: update hrtimer_force_reprogram() to always reprogram clockevent device and update clockevent drivers to STOP generating events (or delay it to max time) when 'expires' is set to KTIME_MAX. But the drawback here is that every clockevent driver has to be hacked for this particular case and its very easy for new ones to miss this. However, Thomas suggested to add an optional state ONESHOT_STOPPED to solve this problem: lkml.org/lkml/2014/5/9/508. This patch adds support for ONESHOT_STOPPED state in clockevents core. It will only be available to drivers that implement the state-specific callbacks instead of the legacy ->set_mode() callback. Signed-off-by: Viresh Kumar Reviewed-by: Preeti U. Murthy Cc: linaro-kernel@lists.linaro.org Cc: Frederic Weisbecker Cc: Kevin Hilman Cc: Daniel Lezcano Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/b8b383a03ac07b13312c16850b5106b82e4245b5.1428031396.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner

tick-broadcast: Fix the printing of broadcast masks

2015-05-05T08:35:58Z

Today the number of bits of the broadcast masks that is output into /proc/timer_list is sizeof(unsigned long). This means that on machines with a larger number of CPUs, the bitmasks of CPUs beyond this range do not appear. Fix this by using bitmap printing through "%*pb" instead, so as to output the broadcast masks for the range of nr_cpu_ids into /proc/timer_list. Signed-off-by: Preeti U Murthy Cc: peterz@infradead.org Cc: linuxppc-dev@ozlabs.org Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/20150428084520.3314.62668.stgit@preeti.in.ibm.com Signed-off-by: Thomas Gleixner

tick: Nohz: Rework next timer evaluation

2015-04-22T15:06:50Z

The evaluation of the next timer in the nohz code is based on jiffies while all the tick internals are nano seconds based. We have also to convert hrtimer nanoseconds to jiffies in the !highres case. That's just wrong and introduces interesting corner cases. Turn it around and convert the next timer wheel timer expiry and the rcu event to clock monotonic and base all calculations on nanoseconds. That identifies the case where no timer is pending clearly with an absolute expiry value of KTIME_MAX. Makes the code more readable and gets rid of the jiffies magic in the nohz code. Signed-off-by: Thomas Gleixner Reviewed-by: Paul E. McKenney Acked-by: Peter Zijlstra Cc: Preeti U Murthy Cc: Viresh Kumar Cc: Marcelo Tosatti Cc: Frederic Weisbecker Cc: Josh Triplett Cc: Lai Jiangshan Cc: John Stultz Cc: Marcelo Tosatti Link: http://lkml.kernel.org/r/20150414203502.184198593@linutronix.de Signed-off-by: Thomas Gleixner

hrtimer: Make the statistics fields smaller

2015-04-22T15:06:49Z

No point in having usigned long for /proc/timer_list statistics. Make them unsigned int. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: Preeti U Murthy Cc: Viresh Kumar Cc: Marcelo Tosatti Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/20150414203500.959773467@linutronix.de Signed-off-by: Thomas Gleixner