user/sven/linux.git/kernel/trace/trace.h, branch v4.14.136

tracing: Silence GCC 9 array bounds warning

2019-06-25T03:36:50Z

commit 0c97bf863efce63d6ab7971dad811601e6171d2f upstream. Starting with GCC 9, -Warray-bounds detects cases when memset is called starting on a member of a struct but the size to be cleared ends up writing over further members. Such a call happens in the trace code to clear, at once, all members after and including `seq` on struct trace_iterator: In function 'memset', inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3: ./include/linux/string.h:344:9: warning: '__builtin_memset' offset [8505, 8560] from the object at 'iter' is out of the bounds of referenced subobject 'seq' with type 'struct trace_seq' at offset 4368 [-Warray-bounds] 344 | return __builtin_memset(p, c, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to avoid GCC complaining about it, we compute the address ourselves by adding the offsetof distance instead of referring directly to the member. Since there are two places doing this clear (trace.c and trace_kdb.c), take the chance to move the workaround into a single place in the internal header. Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com Signed-off-by: Miguel Ojeda [ Removed unnecessary parenthesis around "iter" ] Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing/fgraph: Fix set_graph_function from showing interrupts

2019-05-16T17:42:27Z

[ Upstream commit 5cf99a0f3161bc3ae2391269d134d6bf7e26f00e ] The tracefs file set_graph_function is used to only function graph functions that are listed in that file (or all functions if the file is empty). The way this is implemented is that the function graph tracer looks at every function, and if the current depth is zero and the function matches something in the file then it will trace that function. When other functions are called, the depth will be greater than zero (because the original function will be at depth zero), and all functions will be traced where the depth is greater than zero. The issue is that when a function is first entered, and the handler that checks this logic is called, the depth is set to zero. If an interrupt comes in and a function in the interrupt handler is traced, its depth will be greater than zero and it will automatically be traced, even if the original function was not. But because the logic only looks at depth it may trace interrupts when it should not be. The recent design change of the function graph tracer to fix other bugs caused the depth to be zero while the function graph callback handler is being called for a longer time, widening the race of this happening. This bug was actually there for a longer time, but because the race window was so small it seldom happened. The Fixes tag below is for the commit that widen the race window, because that commit belongs to a series that will also help fix the original bug. Cc: stable@kernel.org Fixes: 39eb456dacb5 ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack") Reported-by: Joe Lawrence Tested-by: Joe Lawrence Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin

tracing: Make the snapshot trigger work with instances

2018-06-05T09:41:56Z

commit 2824f5033248600673e3e126a4d135363cbfd9ac upstream. The snapshot trigger currently only affects the main ring buffer, even when it is used by the instances. This can be confusing as the snapshot trigger is listed in the instance. > # cd /sys/kernel/tracing > # mkdir instances/foo > # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger > # echo top buffer > trace_marker > # echo foo buffer > instances/foo/trace_marker > # touch /tmp/bar > # chown rostedt /tmp/bar > # cat instances/foo/snapshot # tracer: nop # # # * Snapshot is freed * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') > # cat snapshot # tracer: nop # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | bash-1189 [000] .... 111.488323: tracing_mark_write: top buffer Not only did the snapshot occur in the top level buffer, but the instance snapshot buffer should have been allocated, and it is still free. Cc: stable@vger.kernel.org Fixes: 85f2b08268c01 ("tracing: Add basic event trigger framework") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

tracing: Ignore mmiotrace from kernel commandline

2017-09-19T16:36:01Z

The mmiotrace tracer cannot be enabled with ftrace=mmiotrace in kernel commandline. With this patch, noboot is added to the tracer struct, and when system boot with a tracer that has noboot=true, it will print out a warning message and continue booting. Link: http://lkml.kernel.org/r/1505111195-31942-1-git-send-email-zsun@redhat.com Signed-off-by: Ziqian SUN (Zamir) Signed-off-by: Steven Rostedt (VMware)

tracing: Only have rmmod clear buffers that its events were active in

2017-08-31T21:47:38Z

Currently, when a module event is enabled, when that module is removed, it clears all ring buffers. This is to prevent another module from being loaded and having one of its trace event IDs from reusing a trace event ID of the removed module. This could cause undesirable effects as the trace event of the new module would be using its own processing algorithms to process raw data of another event. To prevent this, when a module is loaded, if any of its events have been used (signified by the WAS_ENABLED event call flag, which is never cleared), all ring buffers are cleared, just in case any one of them contains event data of the removed event. The problem is, there's no reason to clear all ring buffers if only one (or less than all of them) uses one of the events. Instead, only clear the ring buffers that recorded the events of a module that is being removed. To do this, instead of keeping the WAS_ENABLED flag with the trace event call, move it to the per instance (per ring buffer) event file descriptor. The event file descriptor maps each event to a separate ring buffer instance. Then when the module is removed, only the ring buffers that activated one of the module's events get cleared. The rest are not touched. Signed-off-by: Steven Rostedt (VMware)

trace: fix the errors caused by incompatible type of RCU variables

2017-07-20T13:27:29Z

The variables which are processed by RCU functions should be annotated as RCU, otherwise sparse will report the errors like below: "error: incompatible types in comparison expression (different address spaces)" Link: http://lkml.kernel.org/r/1496823171-7758-1-git-send-email-zhang.chunyan@linaro.org Signed-off-by: Chunyan Zhang [ Updated to not be 100% 80 column strict ] Signed-off-by: Steven Rostedt (VMware)

tracing: Add support for recording tgid of tasks

2017-06-27T17:30:28Z

Inorder to support recording of tgid, the following changes are made: * Introduce a new API (tracing_record_taskinfo) to additionally record the tgid along with the task's comm at the same time. This has has the benefit of not setting trace_cmdline_save before all the information for a task is saved. * Add a new API tracing_record_taskinfo_sched_switch to record task information for 2 tasks at a time (previous and next) and use it from sched_switch probe. * Preserve the old API (tracing_record_cmdline) and create it as a wrapper around the new one so that existing callers aren't affected. * Reuse the existing sched_switch and sched_wakeup probes to record tgid information and add a new option 'record-tgid' to enable recording of tgid When record-tgid option isn't enabled to being with, we take care to make sure that there's isn't memory or runtime overhead. Link: http://lkml.kernel.org/r/20170627020155.5139-1-joelaf@google.com Cc: kernel-team@android.com Cc: Ingo Molnar Tested-by: Michael Sartain Signed-off-by: Joel Fernandes Signed-off-by: Steven Rostedt (VMware)

ftrace: Have cached module filters be an active filter

2017-06-26T15:53:04Z

When a module filter is added to set_ftrace_filter, if the module is not loaded, it is cached. This should be considered an active filter, and function tracing should be filtered by this. That is, if a cached module filter is the only filter set, then no function tracing should be happening, as all the functions available will be filtered out. This makes sense, as the reason to add a cached module filter, is to trace the module when you load it. There shouldn't be any other tracing happening until then. Signed-off-by: Steven Rostedt (VMware)

ftrace: Add :mod: caching infrastructure to trace_array

2017-06-26T15:53:02Z

This is the start of the infrastructure work to allow for tracing module functions before it is loaded. Currently the following command: # echo :mod:some-mod > set_ftrace_filter will enable tracing of all functions within the module "some-mod" if it is loaded. What we want, is if the module is not loaded, that line will be saved. When the module is loaded, then the "some-mod" will have that line executed on it, so that the functions within it starts being traced. Signed-off-by: Steven Rostedt (VMware)