user/sven/linux.git/kernel/trace/trace_event_perf.c, branch v4.9.5

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2016-05-17T23:26:30Z

Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...

perf: split perf_trace_buf_prepare into alloc and update parts

2016-04-08T01:04:26Z

split allows to move expensive update of 'struct trace_entry' to later phase. Repurpose unused 1st argument of perf_tp_event() to indicate event type. While splitting use temp variable 'rctx' instead of '*rctx' to avoid unnecessary loads done by the compiler due to -fno-strict-aliasing Signed-off-by: Alexei Starovoitov Acked-by: Peter Zijlstra (Intel) Signed-off-by: David S. Miller

perf: optimize perf_fetch_caller_regs

2016-04-08T01:04:26Z

avoid memset in perf_fetch_caller_regs, since it's the critical path of all tracepoints. It's called from perf_sw_event_sched, perf_event_task_sched_in and all of perf_trace_##call with this_cpu_ptr(&__perf_regs[..]) which are zero initialized by perpcu init logic and subsequent call to perf_arch_fetch_caller_regs initializes the same fields on all archs, so we can safely drop memset from all of the above cases and move it into perf_ftrace_function_call that calls it with stack allocated pt_regs. Acked-by: Peter Zijlstra (Intel) Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller

ftrace/perf: Check sample types only for sampling events

2016-03-31T08:30:45Z

Currently we check sample type for ftrace:function events even if it's not created as a sampling event. That prevents creating ftrace_function event in counting mode. Make sure we check sample types only for sampling events. Before: $ sudo perf stat -e ftrace:function ls ... Performance counter stats for 'ls': ftrace:function 0.001983662 seconds time elapsed After: $ sudo perf stat -e ftrace:function ls ... Performance counter stats for 'ls': 44,498 ftrace:function 0.037534722 seconds time elapsed Suggested-by: Namhyung Kim Signed-off-by: Jiri Olsa Signed-off-by: Peter Zijlstra (Intel) Acked-by: Steven Rostedt Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Link: http://lkml.kernel.org/r/1458138873-1553-2-git-send-email-jolsa@kernel.org Signed-off-by: Ingo Molnar

Merge tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2016-01-13T04:04:15Z

Pull tracing updates from Steven Rostedt: "Not much new with tracing for this release. Mostly just clean ups and minor fixes. Here's what else is new: - A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for those that want both. - New selftest to test the instance create and delete - Better debug output when ftrace fails" * tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits) ftrace: Fix the race between ftrace and insmod ftrace: Add infrastructure for delayed enabling of module functions x86: ftrace: Fix the comments for ftrace_modify_code_direct() tracing: Fix comment to use tracing_on over tracing_enable metag: ftrace: Fix the comments for ftrace_modify_code sh: ftrace: Fix the comments for ftrace_modify_code() ia64: ftrace: Fix the comments for ftrace_modify_code() ftrace: Clean up ftrace_module_init() code ftrace: Join functions ftrace_module_init() and ftrace_init_module() tracing: Introduce TRACE_EVENT_FN_COND macro tracing: Use seq_buf_used() in seq_buf_to_user() instead of len bpf: Constify bpf_verifier_ops structure ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too ftrace: Remove use of control list and ops ftrace: Fix output of enabled_functions for showing tramp ftrace: Fix a typo in comment ftrace: Show all tramps registered to a record on ftrace_bug() ftrace: Add variable ftrace_expected for archs to show expected code ftrace: Add new type to distinguish what kind of ftrace_bug() tracing: Update cond flag when enabling or disabling a trigger ...

ftrace: Remove use of control list and ops

2015-12-23T19:27:18Z

Currently perf has its own list function within the ftrace infrastructure that seems to be used only to allow for it to have per-cpu disabling as well as a check to make sure that it's not called while RCU is not watching. It uses something called the "control_ops" which is used to iterate over ops under it with the control_list_func(). The problem is that this control_ops and control_list_func unnecessarily complicates the code. By replacing FTRACE_OPS_FL_CONTROL with two new flags (FTRACE_OPS_FL_RCU and FTRACE_OPS_FL_PER_CPU) we can remove all the code that is special with the control ops and add the needed checks within the generic ftrace_list_func(). Signed-off-by: Steven Rostedt

treewide: Remove old email address

2015-11-23T08:44:58Z

There were still a number of references to my old Red Hat email address in the kernel source. Remove these while keeping the Red Hat copyright notices intact. Signed-off-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Signed-off-by: Ingo Molnar

tracing: Rename ftrace_event_{call,class} to trace_event_{call,class}

2015-05-13T18:06:10Z

The name "ftrace" really refers to the function hook infrastructure. It is not about the trace_events. The structures ftrace_event_call and ftrace_event_class have nothing to do with the function hooks, and are really trace_event structures. Rename ftrace_event_* to trace_event_*. Signed-off-by: Steven Rostedt

perf: Avoid horrible stack usage

2015-01-14T14:11:45Z

Both Linus (most recent) and Steve (a while ago) reported that perf related callbacks have massive stack bloat. The problem is that software events need a pt_regs in order to properly report the event location and unwind stack. And because we could not assume one was present we allocated one on stack and filled it with minimal bits required for operation. Now, pt_regs is quite large, so this is undesirable. Furthermore it turns out that most sites actually have a pt_regs pointer available, making this even more onerous, as the stack space is pointless waste. This patch addresses the problem by observing that software events have well defined nesting semantics, therefore we can use static per-cpu storage instead of on-stack. Linus made the further observation that all but the scheduler callers of perf_sw_event() have a pt_regs available, so we change the regular perf_sw_event() to require a valid pt_regs (where it used to be optional) and add perf_sw_event_sched() for the scheduler. We have a scheduler specific call instead of a more generic _noregs() like construct because we can assume non-recursion from the scheduler and thereby simplify the code further (_noregs would have to put the recursion context call inline in order to assertain which __perf_regs element to use). One last note on the implementation of perf_trace_buf_prepare(); we allow .regs = NULL for those cases where we already have a pt_regs pointer available and do not need another. Reported-by: Linus Torvalds Reported-by: Steven Rostedt Signed-off-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Javi Merino Cc: Linus Torvalds Cc: Mathieu Desnoyers Cc: Oleg Nesterov Cc: Paul Mackerras Cc: Petr Mladek Cc: Steven Rostedt Cc: Tom Zanussi Cc: Vaibhav Nagarnaik Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar

perf: Check permission only for parent tracepoint event

2014-07-28T08:01:38Z

There's no need to check cloned event's permission once the parent was already checked. Also the code is checking 'current' process permissions, which is not owner process for cloned events, thus could end up with wrong permission check result. Reported-by: Alexander Yarygin Tested-by: Alexander Yarygin Signed-off-by: Jiri Olsa Signed-off-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Linus Torvalds Cc: Steven Rostedt Link: http://lkml.kernel.org/r/1405079782-8139-1-git-send-email-jolsa@kernel.org Signed-off-by: Ingo Molnar