user/sven/linux.git/kernel/trace/trace_mmiotrace.c, branch v3.14.76

tracing: Update event filters for multibuffer

2013-11-05T21:50:20Z

The trace event filters are still tied to event calls rather than event files, which means you don't get what you'd expect when using filters in the multibuffer case: Before: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 2048 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 Setting the filter in tracing/instances/test1/events shouldn't affect the same event in tracing/events as it does above. After: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 We'd like to just move the filter directly from ftrace_event_call to ftrace_event_file, but there are a couple cases that don't yet have multibuffer support and therefore have to continue using the current event_call-based filters. For those cases, a new USE_CALL_FILTER bit is added to the event_call flags, whose main purpose is to keep the old behavior for those cases until they can be updated with multibuffer support; at that point, the USE_CALL_FILTER flag (and the new associated call_filter_check_discard() function) can go away. The multibuffer support also made filter_current_check_discard() redundant, so this change removes that function as well and replaces it with filter_check_discard() (or call_filter_check_discard() as appropriate). Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt

tracing: Use trace_seq_puts()/trace_seq_putc() where possible

2013-07-19T01:30:36Z

For string without format specifiers, use trace_seq_puts() or trace_seq_putc(). Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com Signed-off-by: zhangwei(Jovi) [ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ] Signed-off-by: Steven Rostedt

tracing: Consolidate max_tr into main trace_array structure

2013-03-15T04:35:40Z

Currently, the way the latency tracers and snapshot feature works is to have a separate trace_array called "max_tr" that holds the snapshot buffer. For latency tracers, this snapshot buffer is used to swap the running buffer with this buffer to save the current max latency. The only items needed for the max_tr is really just a copy of the buffer itself, the per_cpu data pointers, the time_start timestamp that states when the max latency was triggered, and the cpu that the max latency was triggered on. All other fields in trace_array are unused by the max_tr, making the max_tr mostly bloat. This change removes the max_tr completely, and adds a new structure called trace_buffer, that holds the buffer pointer, the per_cpu data pointers, the time_start timestamp, and the cpu where the latency occurred. The trace_array, now has two trace_buffers, one for the normal trace and one for the max trace or snapshot. By doing this, not only do we remove the bloat from the max_trace but the instances of traces can now use their own snapshot feature and not have just the top level global_trace have the snapshot feature and latency tracers for itself. Signed-off-by: Steven Rostedt

tracing: Replace the static global per_cpu arrays with allocated per_cpu

2013-03-15T04:34:43Z

The global and max-tr currently use static per_cpu arrays for the CPU data descriptors. But in order to get new allocated trace_arrays, they need to be allocated per_cpu arrays. Instead of using the static arrays, switch the global and max-tr to use allocated data. Signed-off-by: Steven Rostedt

atomic: use

2011-07-26T23:49:47Z

This allows us to move duplicated code in (atomic_inc_not_zero() for now) to Signed-off-by: Arun Sharma Reviewed-by: Eric Dumazet Cc: Ingo Molnar Cc: David Miller Cc: Eric Dumazet Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

tracing: add filter event logic to special, mmiotrace and boot tracers

2009-09-13T03:34:04Z

Now that the pluging tracers use macros to create the structures and automate the exporting of their formats to the format files, they also automatically get a filter file. This patch adds the code to implement the filter logic in the trace recordings. Signed-off-by: Steven Rostedt

tracing: pass around ring buffer instead of tracer

2009-09-04T22:59:39Z

The latency tracers (irqsoff and wakeup) can swap trace buffers on the fly. If an event is happening and has reserved data on one of the buffers, and the latency tracer swaps the global buffer with the max buffer, the result is that the event may commit the data to the wrong buffer. This patch changes the API to the trace recording to be recieve the buffer that was used to reserve a commit. Then this buffer can be passed in to the commit. Signed-off-by: Steven Rostedt

tracing: use macros to denote usec and nsec per second

2009-04-07T12:43:06Z

Impact: cleanup Use USEC_PER_SEC and NSEC_PER_SEC instead of 1000000 and 1000000000. Signed-off-by: Li Zefan LKML-Reference: <49CC7870.9000309@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt

tracing: remove recording function depth from trace_printk

2009-03-19T19:58:47Z

The function depth in trace_printk was to facilitate the function graph output. Now that the function graph calculates the depth within the trace output, we no longer need to record the depth when the trace_printk is called. Signed-off-by: Steven Rostedt