user/sven/linux.git/kernel/trace/trace_output.c, branch v5.4.235

tracing: Make sure trace_printk() can output as soon as it can be used

2023-02-06T06:52:43Z

commit 3bb06eb6e9acf7c4a3e1b5bc87aed398ff8e2253 upstream. Currently trace_printk() can be used as soon as early_trace_init() is called from start_kernel(). But if a crash happens, and "ftrace_dump_on_oops" is set on the kernel command line, all you get will be: [ 0.456075] -0 0dN.2. 347519us : Unknown type 6 [ 0.456075] -0 0dN.2. 353141us : Unknown type 6 [ 0.456075] -0 0dN.2. 358684us : Unknown type 6 This is because the trace_printk() event (type 6) hasn't been registered yet. That gets done via an early_initcall(), which may be early, but not early enough. Instead of registering the trace_printk() event (and other ftrace events, which are not trace events) via an early_initcall(), have them registered at the same time that trace_printk() can be used. This way, if there is a crash before early_initcall(), then the trace_printk()s will actually be useful. Link: https://lkml.kernel.org/r/20230104161412.019f6c55@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Fixes: e725c731e3bb1 ("tracing: Split tracing initialization into two for early initialization") Reported-by: "Joel Fernandes (Google)" Tested-by: Joel Fernandes (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

tracing: Make the space reserved for the pid wider

2020-10-07T06:01:27Z

[ Upstream commit 795d6379a47bcbb88bd95a69920e4acc52849f88 ] For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to 4194304. During boot the kernel sets a new value based on number of CPUs but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default becomes 131072 which needs six digits. This value can be increased during run time but must not exceed the initial upper limit. Systemd sometime after v241 sets it to the upper limit during boot. The result is that when the pid exceeds five digits, the trace output is a little hard to read because it is no longer properly padded (same like on big iron with 98+ CPUs). Increase the pid padding to seven digits. Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin

tracing: Be more clever when dumping hex in __print_hex()

2019-09-17T15:21:28Z

Hex dump as many as 16 bytes at once in trace_print_hex_seq() instead of byte-by-byte approach. Link: http://lkml.kernel.org/r/20190806151543.86061-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2019-07-19T19:18:46Z

Pull tracing fix from Steven Rostedt: "Eiichi Tsukata found a small bug from the fixup of the stack code Removing ULONG_MAX as the marker for the user stack trace end, made the tracing code not know where the end is. The end is now marked with a zero (NULL) pointer. Eiichi fixed this in the tracing code" * tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix user stack trace "??" output

tracing: Fix user stack trace "??" output

2019-07-19T16:12:39Z

Commit c5c27a0a5838 ("x86/stacktrace: Remove the pointless ULONG_MAX marker") removes ULONG_MAX marker from user stack trace entries but trace_user_stack_print() still uses the marker and it outputs unnecessary "??". For example: less-1911 [001] d..2 34.758944: => <00007f16f2295910> => ?? => ?? => ?? => ?? => ?? => ?? => ?? The user stack trace code zeroes the storage before saving the stack, so if the trace is shorter than the maximum number of entries it can terminate the print loop if a zero entry is detected. Link: http://lkml.kernel.org/r/20190630085438.25545-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery") Signed-off-by: Eiichi Tsukata Signed-off-by: Steven Rostedt (VMware)

tracing: Fix out-of-range read in trace_stack_print()

2019-06-14T20:28:42Z

Puts range check before dereferencing the pointer. Reproducer: # echo stacktrace > trace_options # echo 1 > events/enable # cat trace > /dev/null KASAN report: ================================================================== BUG: KASAN: use-after-free in trace_stack_print+0x26b/0x2c0 Read of size 8 at addr ffff888069d20000 by task cat/1953 CPU: 0 PID: 1953 Comm: cat Not tainted 5.2.0-rc3+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 Call Trace: dump_stack+0x8a/0xce print_address_description+0x60/0x224 ? trace_stack_print+0x26b/0x2c0 ? trace_stack_print+0x26b/0x2c0 __kasan_report.cold+0x1a/0x3e ? trace_stack_print+0x26b/0x2c0 kasan_report+0xe/0x20 trace_stack_print+0x26b/0x2c0 print_trace_line+0x6ea/0x14d0 ? tracing_buffers_read+0x700/0x700 ? trace_find_next_entry_inc+0x158/0x1d0 s_show+0xea/0x310 seq_read+0xaa7/0x10e0 ? seq_escape+0x230/0x230 __vfs_read+0x7c/0x100 vfs_read+0x16c/0x3a0 ksys_read+0x121/0x240 ? kernel_write+0x110/0x110 ? perf_trace_sys_enter+0x8a0/0x8a0 ? syscall_slow_exit_work+0xa9/0x410 do_syscall_64+0xb7/0x390 ? prepare_exit_to_usermode+0x165/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f867681f910 Code: b6 fe ff ff 48 8d 3d 0f be 08 00 48 83 ec 08 e8 06 db 01 00 66 0f 1f 44 00 00 83 3d f9 2d 2c 00 00 75 10 b8 00 00 00 00 04 RSP: 002b:00007ffdabf23488 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f867681f910 RDX: 0000000000020000 RSI: 00007f8676cde000 RDI: 0000000000000003 RBP: 00007f8676cde000 R08: ffffffffffffffff R09: 0000000000000000 R10: 0000000000000871 R11: 0000000000000246 R12: 00007f8676cde000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000000ec0 Allocated by task 1214: save_stack+0x1b/0x80 __kasan_kmalloc.constprop.0+0xc2/0xd0 kmem_cache_alloc+0xaf/0x1a0 getname_flags+0xd2/0x5b0 do_sys_open+0x277/0x5a0 do_syscall_64+0xb7/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1214: save_stack+0x1b/0x80 __kasan_slab_free+0x12c/0x170 kmem_cache_free+0x8a/0x1c0 putname+0xe1/0x120 do_sys_open+0x2c5/0x5a0 do_syscall_64+0xb7/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888069d20000 which belongs to the cache names_cache of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [ffff888069d20000, ffff888069d21000) The buggy address belongs to the page: page:ffffea0001a74800 refcount:1 mapcount:0 mapping:ffff88806ccd1380 index:0x0 compound_mapcount: 0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000200 ffff88806ccd1380 raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888069d1ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888069d1ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888069d20000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888069d20080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888069d20100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Link: http://lkml.kernel.org/r/20190610040016.5598-1-devel@etsukata.com Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery") Signed-off-by: Eiichi Tsukata Signed-off-by: Steven Rostedt (VMware)

tracing: Simplify printf'ing in seq_print_sym

2018-12-22T13:21:06Z

trace_seq_printf(..., "%s", ...) can be done with trace_seq_puts() instead, avoiding printf overhead. In the second instance, the string we're copying was just created from an snprintf() to a stack buffer, so we might as well do that printf directly. This naturally leads to moving the declaration of the str buffer inside the CONFIG_KALLSYMS guard, which in turn will make gcc inline the function for !CONFIG_KALLSYMS (it only has a single caller, but the huge stack frame seems to make gcc not inline it for CONFIG_KALLSYMS). Link: http://lkml.kernel.org/r/20181029223542.26175-4-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes Signed-off-by: Steven Rostedt (VMware)

tracing: Avoid -Wformat-nonliteral warning

2018-12-22T13:21:06Z

Building with -Wformat-nonliteral, gcc complains kernel/trace/trace_output.c: In function ‘seq_print_sym’: kernel/trace/trace_output.c:356:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] trace_seq_printf(s, fmt, name); But seq_print_sym only has a single caller which passes "%s" as fmt, so we might as well just use that directly. That also paves the way for further cleanups that will actually make that format string go away entirely. Link: http://lkml.kernel.org/r/20181029223542.26175-3-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes Signed-off-by: Steven Rostedt (VMware)

tracing: Merge seq_print_sym_short() and seq_print_sym_offset()

2018-12-22T13:21:05Z

These two functions are nearly identical, so we can avoid some code duplication by moving the conditional into a common implementation. Link: http://lkml.kernel.org/r/20181029223542.26175-2-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes Signed-off-by: Steven Rostedt (VMware)

tracing: Add SPDX License format tags to tracing files

2018-08-16T23:08:06Z

Add the SPDX License header to ease license compliance management. Signed-off-by: Steven Rostedt (VMware)