user/sven/linux.git/kernel/workqueue.c, branch v5.10.207

Revert "workqueue: remove unused cancel_work()"

2023-12-08T07:46:13Z

[ Upstream commit 73b4b53276a1d6290cd4f47dbbc885b6e6e59ac6 ] This reverts commit 6417250d3f894e66a68ba1cd93676143f2376a6f. amdpgu need this function in order to prematurly stop pending reset works when another reset work already in progress. Acked-by: Tejun Heo Signed-off-by: Andrey Grodzovsky Reviewed-by: Lai Jiangshan Reviewed-by: Christian König Signed-off-by: Alex Deucher Stable-dep-of: 91d3d149978b ("r8169: prevent potential deadlock in rtl8169_close") Signed-off-by: Sasha Levin

workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()

2023-10-25T09:54:14Z

[ Upstream commit ca10d851b9ad0338c19e8e3089e24d565ebfffd7 ] Commit 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") enabled implicit ordered attribute to be added to WQ_UNBOUND workqueues with max_active of 1. This prevented the changing of attributes to these workqueues leading to fix commit 0a94efb5acbb ("workqueue: implicit ordered attribute should be overridable"). However, workqueue_apply_unbound_cpumask() was not updated at that time. So sysfs changes to wq_unbound_cpumask has no effect on WQ_UNBOUND workqueues with implicit ordered attribute. Since not all WQ_UNBOUND workqueues are visible on sysfs, we are not able to make all the necessary cpumask changes even if we iterates all the workqueue cpumasks in sysfs and changing them one by one. Fix this problem by applying the corresponding change made to apply_workqueue_attrs_locked() in the fix commit to workqueue_apply_unbound_cpumask(). Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") Signed-off-by: Waiman Long Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

workqueue: clean up WORK_* constant types, clarify masking

2023-07-27T06:44:19Z

commit afa4bb778e48d79e4a642ed41e3b4e0de7489a6c upstream. Dave Airlie reports that gcc-13.1.1 has started complaining about some of the workqueue code in 32-bit arm builds: kernel/workqueue.c: In function ‘get_work_pwq’: kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK); | ^ [ ... a couple of other cases ... ] and while it's not immediately clear exactly why gcc started complaining about it now, I suspect it's some C23-induced enum type handlign fixup in gcc-13 is the cause. Whatever the reason for starting to complain, the code and data types are indeed disgusting enough that the complaint is warranted. The wq code ends up creating various "helper constants" (like that WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of confused. The mask needs to be 'unsigned long', not some unspecified enum type. To make matters worse, the actual "mask and cast to a pointer" is repeated a couple of times, and the cast isn't even always done to the right pointer, but - as the error case above - to a 'void *' with then the compiler finishing the job. That's now how we roll in the kernel. So create the masks using the proper types rather than some ambiguous enumeration, and use a nice helper that actually does the type conversion in one well-defined place. Incidentally, this magically makes clang generate better code. That, admittedly, is really just a sign of clang having been seriously confused before, and cleaning up the typing unconfuses the compiler too. Reported-by: Dave Airlie Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/ Cc: Arnd Bergmann Cc: Tejun Heo Cc: Nick Desaulniers Cc: Nathan Chancellor Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

workqueue: Fix hung time report of worker pools

2023-05-17T09:48:00Z

[ Upstream commit 335a42ebb0ca8ee9997a1731aaaae6dcd704c113 ] The workqueue watchdog prints a warning when there is no progress in a worker pool. Where the progress means that the pool started processing a pending work item. Note that it is perfectly fine to process work items much longer. The progress should be guaranteed by waking up or creating idle workers. show_one_worker_pool() prints state of non-idle worker pool. It shows a delay since the last pool->watchdog_ts. The timestamp is updated when a first pending work is queued in __queue_work(). Also it is updated when a work is dequeued for processing in worker_thread() and rescuer_thread(). The delay is misleading when there is no pending work item. In this case it shows how long the last work item is being proceed. Show zero instead. There is no stall if there is no pending work. Fixes: 82607adcf9cdf40fb7b ("workqueue: implement lockup detector") Signed-off-by: Petr Mladek Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

workqueue: Rename "delayed" (delayed by active management) to "inactive"

2023-05-17T09:48:00Z

[ Upstream commit f97a4a1a3f8769e3452885967955e21c88f3f263 ] There are two kinds of "delayed" work items in workqueue subsystem. One is for timer-delayed work items which are visible to workqueue users. The other kind is for work items delayed by active management which can not be directly visible to workqueue users. We mixed the word "delayed" for both kinds and caused somewhat ambiguity. This patch renames the later one (delayed by active management) to "inactive", because it is used for workqueue active management and most of its related symbols are named with "active" or "activate". All "delayed" and "DELAYED" are carefully checked and renamed one by one to avoid accidentally changing the name of the other kind for timer-delayed. No functional change intended. Signed-off-by: Lai Jiangshan Signed-off-by: Tejun Heo Stable-dep-of: 335a42ebb0ca ("workqueue: Fix hung time report of worker pools") Signed-off-by: Sasha Levin

workqueue: don't skip lockdep work dependency in cancel_work_sync()

2022-09-28T09:10:40Z

[ Upstream commit c0feea594e058223973db94c1c32a830c9807c86 ] Like Hillf Danton mentioned syzbot should have been able to catch cancel_work_sync() in work context by checking lockdep_map in __flush_work() for both flush and cancel. in [1], being unable to report an obvious deadlock scenario shown below is broken. From locking dependency perspective, sync version of cancel request should behave as if flush request, for it waits for completion of work if that work has already started execution. ---------- #include #include static DEFINE_MUTEX(mutex); static void work_fn(struct work_struct *work) { schedule_timeout_uninterruptible(HZ / 5); mutex_lock(&mutex); mutex_unlock(&mutex); } static DECLARE_WORK(work, work_fn); static int __init test_init(void) { schedule_work(&work); schedule_timeout_uninterruptible(HZ / 10); mutex_lock(&mutex); cancel_work_sync(&work); mutex_unlock(&mutex); return -EINVAL; } module_init(test_init); MODULE_LICENSE("GPL"); ---------- The check this patch restores was added by commit 0976dfc1d0cd80a4 ("workqueue: Catch more locking problems with flush_work()"). Then, lockdep's crossrelease feature was added by commit b09be676e0ff25bd ("locking/lockdep: Implement the 'crossrelease' feature"). As a result, this check was once removed by commit fd1a5b04dfb899f8 ("workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes"). But lockdep's crossrelease feature was removed by commit e966eaeeb623f099 ("locking/lockdep: Remove the cross-release locking checks"). At this point, this check should have been restored. Then, commit d6e89786bed977f3 ("workqueue: skip lockdep wq dependency in cancel_work_sync()") introduced a boolean flag in order to distinguish flush_work() and cancel_work_sync(), for checking "struct workqueue_struct" dependency when called from cancel_work_sync() was causing false positives. Then, commit 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") tried to restore "struct work_struct" dependency check, but by error checked this boolean flag. Like an example shown above indicates, "struct work_struct" dependency needs to be checked for both flush_work() and cancel_work_sync(). Link: https://lkml.kernel.org/r/20220504044800.4966-1-hdanton@sina.com [1] Reported-by: Hillf Danton Suggested-by: Lai Jiangshan Fixes: 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") Cc: Johannes Berg Signed-off-by: Tetsuo Handa Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

workqueue: Fix unbind_workers() VS wq_worker_running() race

2022-01-16T08:14:22Z

commit 07edfece8bcb0580a1828d939e6f8d91a8603eb2 upstream. At CPU-hotplug time, unbind_worker() may preempt a worker while it is waking up. In that case the following scenario can happen: unbind_workers() wq_worker_running() -------------- ------------------- if (!(worker->flags & WORKER_NOT_RUNNING)) //PREEMPTED by unbind_workers worker->flags |= WORKER_UNBOUND; [...] atomic_set(&pool->nr_running, 0); //resume to worker atomic_inc(&worker->pool->nr_running); After unbind_worker() resets pool->nr_running, the value is expected to remain 0 until the pool ever gets rebound in case cpu_up() is called on the target CPU in the future. But here the race leaves pool->nr_running with a value of 1, triggering the following warning when the worker goes idle: WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0 Modules linked in: CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (rcu_par_gp) RIP: 0010:worker_enter_idle+0x95/0xc0 Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0 RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086 RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140 RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080 R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20 R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140 FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: worker_thread+0x89/0x3d0 ? process_one_work+0x400/0x400 kthread+0x162/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 Also due to this incorrect "nr_running == 1", further queued work may end up not being served, because no worker is awaken at work insert time. This raises rcutorture writer stalls for example. Fix this with disabling preemption in the right place in wq_worker_running(). It's worth noting that if the worker migrates and runs concurrently with unbind_workers(), it is guaranteed to see the WORKER_UNBOUND flag update due to set_cpus_allowed_ptr() acquiring/releasing rq->lock. Fixes: 6d25be5782e4 ("sched/core, workqueues: Distangle worker accounting from rq lock") Reviewed-by: Lai Jiangshan Tested-by: Paul E. McKenney Acked-by: Peter Zijlstra (Intel) Signed-off-by: Frederic Weisbecker Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Sebastian Andrzej Siewior Cc: Daniel Bristot de Oliveira Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

workqueue: make sysfs of unbound kworker cpumask more clever

2021-11-18T13:03:58Z

[ Upstream commit d25302e46592c97d29f70ccb1be558df31a9a360 ] Some unfriendly component, such as dpdk, write the same mask to unbound kworker cpumask again and again. Every time it write to this interface some work is queue to cpu, even though the mask is same with the original mask. So, fix it by return success and do nothing if the cpumask is equal with the old one. Signed-off-by: Mengen Sun Signed-off-by: Menglong Dong Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

workqueue: Fix possible memory leaks in wq_numa_init()

2021-09-18T11:40:23Z

[ Upstream commit f728c4a9e8405caae69d4bc1232c54ff57b5d20f ] In error handling branch "if (WARN_ON(node == NUMA_NO_NODE))", the previously allocated memories are not released. Doing this before allocating memory eliminates memory leaks. tj: Note that the condition only occurs when the arch code is pretty broken and the WARN_ON might as well be BUG_ON(). Signed-off-by: Zhen Lei Reviewed-by: Lai Jiangshan Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

workqueue: fix UAF in pwq_unbound_release_workfn()

2021-07-31T06:16:11Z

commit b42b0bddcbc87b4c66f6497f66fc72d52b712aa7 upstream. I got a UAF report when doing fuzz test: [ 152.880091][ T8030] ================================================================== [ 152.881240][ T8030] BUG: KASAN: use-after-free in pwq_unbound_release_workfn+0x50/0x190 [ 152.882442][ T8030] Read of size 4 at addr ffff88810d31bd00 by task kworker/3:2/8030 [ 152.883578][ T8030] [ 152.883932][ T8030] CPU: 3 PID: 8030 Comm: kworker/3:2 Not tainted 5.13.0+ #249 [ 152.885014][ T8030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 152.886442][ T8030] Workqueue: events pwq_unbound_release_workfn [ 152.887358][ T8030] Call Trace: [ 152.887837][ T8030] dump_stack_lvl+0x75/0x9b [ 152.888525][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.889371][ T8030] print_address_description.constprop.10+0x48/0x70 [ 152.890326][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.891163][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.891999][ T8030] kasan_report.cold.15+0x82/0xdb [ 152.892740][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.893594][ T8030] __asan_load4+0x69/0x90 [ 152.894243][ T8030] pwq_unbound_release_workfn+0x50/0x190 [ 152.895057][ T8030] process_one_work+0x47b/0x890 [ 152.895778][ T8030] worker_thread+0x5c/0x790 [ 152.896439][ T8030] ? process_one_work+0x890/0x890 [ 152.897163][ T8030] kthread+0x223/0x250 [ 152.897747][ T8030] ? set_kthread_struct+0xb0/0xb0 [ 152.898471][ T8030] ret_from_fork+0x1f/0x30 [ 152.899114][ T8030] [ 152.899446][ T8030] Allocated by task 8884: [ 152.900084][ T8030] kasan_save_stack+0x21/0x50 [ 152.900769][ T8030] __kasan_kmalloc+0x88/0xb0 [ 152.901416][ T8030] __kmalloc+0x29c/0x460 [ 152.902014][ T8030] alloc_workqueue+0x111/0x8e0 [ 152.902690][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0 [ 152.903459][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0 [ 152.904198][ T8030] scrub_workers_get+0x1e8/0x490 [ 152.904929][ T8030] btrfs_scrub_dev+0x1b9/0x9c0 [ 152.905599][ T8030] btrfs_ioctl+0x122c/0x4e50 [ 152.906247][ T8030] __x64_sys_ioctl+0x137/0x190 [ 152.906916][ T8030] do_syscall_64+0x34/0xb0 [ 152.907535][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 152.908365][ T8030] [ 152.908688][ T8030] Freed by task 8884: [ 152.909243][ T8030] kasan_save_stack+0x21/0x50 [ 152.909893][ T8030] kasan_set_track+0x20/0x30 [ 152.910541][ T8030] kasan_set_free_info+0x24/0x40 [ 152.911265][ T8030] __kasan_slab_free+0xf7/0x140 [ 152.911964][ T8030] kfree+0x9e/0x3d0 [ 152.912501][ T8030] alloc_workqueue+0x7d7/0x8e0 [ 152.913182][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0 [ 152.913949][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0 [ 152.914703][ T8030] scrub_workers_get+0x1e8/0x490 [ 152.915402][ T8030] btrfs_scrub_dev+0x1b9/0x9c0 [ 152.916077][ T8030] btrfs_ioctl+0x122c/0x4e50 [ 152.916729][ T8030] __x64_sys_ioctl+0x137/0x190 [ 152.917414][ T8030] do_syscall_64+0x34/0xb0 [ 152.918034][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 152.918872][ T8030] [ 152.919203][ T8030] The buggy address belongs to the object at ffff88810d31bc00 [ 152.919203][ T8030] which belongs to the cache kmalloc-512 of size 512 [ 152.921155][ T8030] The buggy address is located 256 bytes inside of [ 152.921155][ T8030] 512-byte region [ffff88810d31bc00, ffff88810d31be00) [ 152.922993][ T8030] The buggy address belongs to the page: [ 152.923800][ T8030] page:ffffea000434c600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10d318 [ 152.925249][ T8030] head:ffffea000434c600 order:2 compound_mapcount:0 compound_pincount:0 [ 152.926399][ T8030] flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) [ 152.927515][ T8030] raw: 057ff00000010200 dead000000000100 dead000000000122 ffff888009c42c80 [ 152.928716][ T8030] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 152.929890][ T8030] page dumped because: kasan: bad access detected [ 152.930759][ T8030] [ 152.931076][ T8030] Memory state around the buggy address: [ 152.931851][ T8030] ffff88810d31bc00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.932967][ T8030] ffff88810d31bc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.934068][ T8030] >ffff88810d31bd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.935189][ T8030] ^ [ 152.935763][ T8030] ffff88810d31bd80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.936847][ T8030] ffff88810d31be00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 152.937940][ T8030] ================================================================== If apply_wqattrs_prepare() fails in alloc_workqueue(), it will call put_pwq() which invoke a work queue to call pwq_unbound_release_workfn() and use the 'wq'. The 'wq' allocated in alloc_workqueue() will be freed in error path when apply_wqattrs_prepare() fails. So it will lead a UAF. CPU0 CPU1 alloc_workqueue() alloc_and_link_pwqs() apply_wqattrs_prepare() fails apply_wqattrs_cleanup() schedule_work(&pwq->unbound_release_work) kfree(wq) worker_thread() pwq_unbound_release_workfn() <- trigger uaf here If apply_wqattrs_prepare() fails, the new pwq are not linked, it doesn't hold any reference to the 'wq', 'wq' is invalid to access in the worker, so add check pwq if linked to fix this. Fixes: 2d5f0764b526 ("workqueue: split apply_workqueue_attrs() into 3 stages") Cc: stable@vger.kernel.org # v4.2+ Reported-by: Hulk Robot Suggested-by: Lai Jiangshan Signed-off-by: Yang Yingliang Reviewed-by: Lai Jiangshan Tested-by: Pavel Skripkin Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman