user/sven/linux.git/kernel, branch v3.12.13

genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n

2014-02-22T21:32:29Z

commit 2c45aada341121438affc4cb8d5b4cfaa2813d3d upstream. In allmodconfig builds for sparc and any other arch which does not set CONFIG_SPARSE_IRQ, the following will be seen at modpost: CC [M] lib/cpu-notifier-error-inject.o CC [M] lib/pm-notifier-error-inject.o ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined! make[2]: *** [__modpost] Error 1 This happens because commit 3911ff30f5 ("genirq: export handle_edge_irq() and irq_to_desc()") added one export for it, but there were actually two instances of it, in an if/else clause for CONFIG_SPARSE_IRQ. Add the second one. Signed-off-by: Paul Gortmaker Cc: Jiri Kosina Link: http://lkml.kernel.org/r/1392057610-11514-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ring-buffer: Fix first commit on sub-buffer having non-zero delta

2014-02-22T21:32:29Z

commit d651aa1d68a2f0a7ee65697b04c6a92f8c0a12f2 upstream. Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on that page use a 27 bit delta against that timestamp in order to save on bits written to the ring buffer. If the time between events is larger than what the 27 bits can hold, a "time extend" event is added to hold the entire 64 bit timestamp again and the events after that hold a delta from that timestamp. As a "time extend" is always paired with an event, it is logical to just allocate the event with the time extend, to make things a bit more efficient. Unfortunately, when the pairing code was written, it removed the "delta = 0" from the first commit on a page, causing the events on the page to be slightly skewed. Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together" Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

time: Fix overflow when HZ is smaller than 60

2014-02-22T21:32:29Z

commit 80d767d770fd9c697e434fd080c2db7b5c60c6dd upstream. When compiling for the IA-64 ski emulator, HZ is set to 32 because the emulation is slow and we don't want to waste too many cycles processing timers. Alpha also has an option to set HZ to 32. This causes integer underflow in kernel/time/jiffies.c: kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] .mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */ ^ This patch reduces the JIFFIES_SHIFT value to avoid the overflow. Signed-off-by: Mikulas Patocka Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

tick: Clear broadcast pending bit when switching to oneshot

2014-02-22T21:32:29Z

commit dd5fd9b91a77b4c9c28b7ef9c181b1a875820d0a upstream. AMD systems which use the C1E workaround in the amd_e400_idle routine trigger the WARN_ON_ONCE in the broadcast code when onlining a CPU. The reason is that the idle routine of those AMD systems switches the cpu into forced broadcast mode early on before the newly brought up CPU can switch over to high resolution / NOHZ mode. The timer related CPU1 bringup looks like this: clockevent_register_device(local_apic); tick_setup(local_apic); ... idle() tick_broadcast_on_off(FORCE); tick_broadcast_oneshot_control(ENTER) cpumask_set(cpu, broadcast_oneshot_mask); halt(); Now the broadcast interrupt on CPU0 sets CPU1 in the broadcast_pending_mask and wakes CPU1. So CPU1 continues: local_apic_timer_interrupt() tick_handle_periodic(); softirq() tick_init_highres(); cpumask_clr(cpu, broadcast_oneshot_mask); tick_broadcast_oneshot_control(ENTER) WARN_ON(cpumask_test(cpu, broadcast_pending_mask); So while we remove CPU1 from the broadcast_oneshot_mask when we switch over to highres mode, we do not clear the pending bit, which then triggers the warning when we go back to idle. The reason why this is only visible on C1E affected AMD systems is that the other machines enter the deep sleep states via acpi_idle/intel_idle and exit the broadcast mode before executing the remote triggered local_apic_timer_interrupt. So the pending bit is already cleared when the switch over to highres mode is clearing the oneshot mask. The solution is simple: Clear the pending bit together with the mask bit when we switch over to highres mode. Stanislaw came up independently with the same patch by enforcing the C1E workaround and debugging the fallout. I picked mine, because mine has a changelog :) Reported-by: poma Debugged-by: Stanislaw Gruszka Signed-off-by: Thomas Gleixner Cc: Olaf Hering Cc: Dave Jones Cc: Justin M. Forbes Cc: Josh Boyer Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402111434180.21991@ionos.tec.linutronix.de Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

genirq: Generic irq chip requires IRQ_DOMAIN

2014-02-20T19:08:02Z

commit 923fa4ea382f592dee2ba3b205befb90cbddf3af upstream. The generic_chip.c uses interfaces from irq_domain.c which is controlled by the IRQ_DOMAIN config option, but there is no Kconfig dependency so the build can fail: linux/kernel/irq/generic-chip.c:400:11: error: 'irq_domain_xlate_onetwocell' undeclared here (not in a function) Select IRQ_DOMAIN when GENERIC_IRQ_CHIP is selected. Signed-off-by: Nitin A Kamble Link: http://lkml.kernel.org/r/1391129410-54548-2-git-send-email-nitin.a.kamble@intel.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

timekeeping: Fix missing timekeeping_update in suspend path

2014-02-13T21:50:26Z

commit 330a1617b0a6268d427aa5922c94d082b1d3e96d upstream. Since 48cdc135d4840 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. In the timekeeping suspend path, we udpate the timekeeper structure, so we should be sure to update the shadow-timekeeper before releasing the timekeeping locks. Currently this isn't done. In most cases, the next time related code to run would be timekeeping_resume, which does update the shadow-timekeeper, but in an abundence of caution, this patch adds the call to timekeeping_update() in the suspend path. Cc: Sasha Levin Cc: Thomas Gleixner Cc: Prarit Bhargava Cc: Richard Cochran Cc: Ingo Molnar Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

timekeeping: Fix CLOCK_TAI timer/nanosleep delays

2014-02-13T21:50:26Z

commit 04005f6011e3b504cd4d791d9769f7cb9a3b2eae upstream. A think-o in the calculation of the monotonic -> tai time offset results in CLOCK_TAI timers and nanosleeps to expire late (the latency is ~2x the tai offset). Fix this by adding the tai offset from the realtime offset instead of subtracting. Cc: Sasha Levin Cc: Thomas Gleixner Cc: Prarit Bhargava Cc: Richard Cochran Cc: Ingo Molnar Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

3.13.y: timekeeping: Fix clock_set/clock_was_set think-o

2014-02-13T21:50:25Z

In backporting 6fdda9a9c5db367130cf32df5d6618d08b89f46a (timekeeping: Avoid possible deadlock from clock_was_set_delayed), I ralized the patch had a think-o where instead of checking clock_set I accidentally typed clock_was_set (which is a function - so the conditional always is true). Upstream this was resolved in the immediately following patch 47a1b796306356f358e515149d86baf0cc6bf007 (tick/timekeeping: Call update_wall_time outside the jiffies lock). But since that patch really isn't -stable material, so this patch only pulls the name change. Cc: Thomas Gleixner Cc: Prarit Bhargava Cc: Richard Cochran Cc: Ingo Molnar Cc: Sasha Levin Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

timekeeping: Avoid possible deadlock from clock_was_set_delayed

2014-02-13T21:50:25Z

commit 6fdda9a9c5db367130cf32df5d6618d08b89f46a upstream. As part of normal operaions, the hrtimer subsystem frequently calls into the timekeeping code, creating a locking order of hrtimer locks -> timekeeping locks clock_was_set_delayed() was suppoed to allow us to avoid deadlocks between the timekeeping the hrtimer subsystem, so that we could notify the hrtimer subsytem the time had changed while holding the timekeeping locks. This was done by scheduling delayed work that would run later once we were out of the timekeeing code. But unfortunately the lock chains are complex enoguh that in scheduling delayed work, we end up eventually trying to grab an hrtimer lock. Sasha Levin noticed this in testing when the new seqlock lockdep enablement triggered the following (somewhat abrieviated) message: [ 251.100221] ====================================================== [ 251.100221] [ INFO: possible circular locking dependency detected ] [ 251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted [ 251.101967] ------------------------------------------------------- [ 251.101967] kworker/10:1/4506 is trying to acquire lock: [ 251.101967] (timekeeper_seq){----..}, at: [] retrigger_next_event+0x56/0x70 [ 251.101967] [ 251.101967] but task is already holding lock: [ 251.101967] (hrtimer_bases.lock#11){-.-...}, at: [] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] which lock already depends on the new lock. [ 251.101967] [ 251.101967] [ 251.101967] the existing dependency chain (in reverse order) is: [ 251.101967] -> #5 (hrtimer_bases.lock#11){-.-...}: [snipped] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [snipped] -> #3 (&rq->lock){-.-.-.}: [snipped] -> #2 (&p->pi_lock){-.-.-.}: [snipped] -> #1 (&(&pool->lock)->rlock){-.-...}: [ 251.101967] [] validate_chain+0x6c3/0x7b0 [ 251.101967] [] __lock_acquire+0x4ad/0x580 [ 251.101967] [] lock_acquire+0x182/0x1d0 [ 251.101967] [] _raw_spin_lock+0x40/0x80 [ 251.101967] [] __queue_work+0x1a9/0x3f0 [ 251.101967] [] queue_work_on+0x98/0x120 [ 251.101967] [] clock_was_set_delayed+0x21/0x30 [ 251.101967] [] do_adjtimex+0x111/0x160 [ 251.101967] [] compat_sys_adjtimex+0x41/0x70 [ 251.101967] [] ia32_sysret+0x0/0x5 [ 251.101967] -> #0 (timekeeper_seq){----..}: [snipped] [ 251.101967] other info that might help us debug this: [ 251.101967] [ 251.101967] Chain exists of: timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11 [ 251.101967] Possible unsafe locking scenario: [ 251.101967] [ 251.101967] CPU0 CPU1 [ 251.101967] ---- ---- [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(&rt_b->rt_runtime_lock); [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(timekeeper_seq); [ 251.101967] [ 251.101967] *** DEADLOCK *** [ 251.101967] [ 251.101967] 3 locks held by kworker/10:1/4506: [ 251.101967] #0: (events){.+.+.+}, at: [] process_one_work+0x200/0x530 [ 251.101967] #1: (hrtimer_work){+.+...}, at: [] process_one_work+0x200/0x530 [ 251.101967] #2: (hrtimer_bases.lock#11){-.-...}, at: [] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] stack backtrace: [ 251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 [ 251.101967] Workqueue: events clock_was_set_work So the best solution is to avoid calling clock_was_set_delayed() while holding the timekeeping lock, and instead using a flag variable to decide if we should call clock_was_set() once we've released the locks. This works for the case here, where the do_adjtimex() was the deadlock trigger point. Unfortuantely, in update_wall_time() we still hold the jiffies lock, which would deadlock with the ipi triggered by clock_was_set(), preventing us from calling it even after we drop the timekeeping lock. So instead call clock_was_set_delayed() at that point. Cc: Thomas Gleixner Cc: Prarit Bhargava Cc: Richard Cochran Cc: Ingo Molnar Cc: Sasha Levin Reported-by: Sasha Levin Tested-by: Sasha Levin Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

timekeeping: Fix potential lost pv notification of time change

2014-02-13T21:50:25Z

commit 5258d3f25c76f6ab86e9333abf97a55a877d3870 upstream. In 780427f0e11 (Indicate that clock was set in the pvclock gtod notifier), logic was added to pass a CLOCK_WAS_SET notification to the pvclock notifier chain. While that patch added a action flag returned from accumulate_nsecs_to_secs(), it only uses the returned value in one location, and not in the logarithmic accumulation. This means if a leap second triggered during the logarithmic accumulation (which is most likely where it would happen), the notification that the clock was set would not make it to the pv notifiers. This patch extends the logarithmic_accumulation pass down that action flag so proper notification will occur. This patch also changes the varialbe action -> clock_set per Ingo's suggestion. Cc: Sasha Levin Cc: Thomas Gleixner Cc: Ingo Molnar Cc: David Vrabel Cc: Konrad Rzeszutek Wilk Cc: Prarit Bhargava Cc: Richard Cochran Cc: Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman