user/sven/linux.git/kernel, branch v4.19.168

workqueue: Kick a worker based on the actual activation of delayed works

2021-01-12T19:10:16Z

[ Upstream commit 01341fbd0d8d4e717fc1231cdffe00343088ce0b ] In realtime scenario, We do not want to have interference on the isolated cpu cores. but when invoking alloc_workqueue() for percpu wq on the housekeeping cpu, it kick a kworker on the isolated cpu. alloc_workqueue pwq_adjust_max_active wake_up_worker The comment in pwq_adjust_max_active() said: "Need to kick a worker after thawed or an unbound wq's max_active is bumped" So it is unnecessary to kick a kworker for percpu's wq when invoking alloc_workqueue(). this patch only kick a worker based on the actual activation of delayed works. Signed-off-by: Yunfeng Ye Reviewed-by: Lai Jiangshan Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

module: delay kobject uevent until after module init call

2021-01-06T13:45:01Z

[ Upstream commit 38dc717e97153e46375ee21797aa54777e5498f3 ] Apparently there has been a longstanding race between udev/systemd and the module loader. Currently, the module loader sends a uevent right after sysfs initialization, but before the module calls its init function. However, some udev rules expect that the module has initialized already upon receiving the uevent. This race has been triggered recently (see link in references) in some systemd mount unit files. For instance, the configfs module creates the /sys/kernel/config mount point in its init function, however the module loader issues the uevent before this happens. sys-kernel-config.mount expects to be able to mount /sys/kernel/config upon receipt of the module loading uevent, but if the configfs module has not called its init function yet, then this directory will not exist and the mount unit fails. A similar situation exists for sys-fs-fuse-connections.mount, as the fuse sysfs mount point is created during the fuse module's init function. If udev is faster than module initialization then the mount unit would fail in a similar fashion. To fix this race, delay the module KOBJ_ADD uevent until after the module has finished calling its init routine. References: https://github.com/systemd/systemd/issues/17586 Reviewed-by: Greg Kroah-Hartman Tested-By: Nicolas Morey-Chaisemartin Signed-off-by: Jessica Yu Signed-off-by: Sasha Levin

module: set MODULE_STATE_GOING state when a module fails to load

2021-01-06T13:45:01Z

[ Upstream commit 5e8ed280dab9eeabc1ba0b2db5dbe9fe6debb6b5 ] If a module fails to load due to an error in prepare_coming_module(), the following error handling in load_module() runs with MODULE_STATE_COMING in module's state. Fix it by correctly setting MODULE_STATE_GOING under "bug_cleanup" label. Signed-off-by: Miroslav Benes Signed-off-by: Jessica Yu Signed-off-by: Sasha Levin

genirq/irqdomain: Don't try to free an interrupt that has no mapping

2020-12-30T10:25:58Z

[ Upstream commit 4615fbc3788ddc8e7c6d697714ad35a53729aa2c ] When an interrupt allocation fails for N interrupts, it is pretty common for the error handling code to free the same number of interrupts, no matter how many interrupts have actually been allocated. This may result in the domain freeing code to be unexpectedly called for interrupts that have no mapping in that domain. Things end pretty badly. Instead, add some checks to irq_domain_free_irqs_hierarchy() to make sure that thiss does not follow the hierarchy if no mapping exists for a given interrupt. Fixes: 6a6544e520abe ("genirq/irqdomain: Remove auto-recursive hierarchy support") Signed-off-by: Marc Zyngier Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20201129135551.396777-1-maz@kernel.org Signed-off-by: Sasha Levin

sched: Reenable interrupts in do_sched_yield()

2020-12-30T10:25:50Z

[ Upstream commit 345a957fcc95630bf5535d7668a59ed983eb49a7 ] do_sched_yield() invokes schedule() with interrupts disabled which is not allowed. This goes back to the pre git era to commit a6efb709806c ("[PATCH] irqlock patch 2.5.27-H6") in the history tree. Reenable interrupts and remove the misleading comment which "explains" it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/87r1pt7y5c.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin

sched/deadline: Fix sched_dl_global_validate()

2020-12-30T10:25:50Z

[ Upstream commit a57415f5d1e43c3a5c5d412cd85e2792d7ed9b11 ] When change sched_rt_{runtime, period}_us, we validate that the new settings should at least accommodate the currently allocated -dl bandwidth: sched_rt_handler() --> sched_dl_bandwidth_validate() { new_bw = global_rt_runtime()/global_rt_period(); for_each_possible_cpu(cpu) { dl_b = dl_bw_of(cpu); if (new_bw < dl_b->total_bw) <------- ret = -EBUSY; } } But under CONFIG_SMP, dl_bw is per root domain , but not per CPU, dl_b->total_bw is the allocated bandwidth of the whole root domain. Instead, we should compare dl_b->total_bw against "cpus*new_bw", where 'cpus' is the number of CPUs of the root domain. Also, below annotation(in kernel/sched/sched.h) implied implementation only appeared in SCHED_DEADLINE v2[1], then deadline scheduler kept evolving till got merged(v9), but the annotation remains unchanged, meaningless and misleading, update it. * With respect to SMP, the bandwidth is given on a per-CPU basis, * meaning that: * - dl_bw (< 100%) is the bandwidth of the system (group) on each CPU; * - dl_total_bw array contains, in the i-eth element, the currently * allocated bandwidth on the i-eth CPU. [1]: https://lore.kernel.org/lkml/1267385230.13676.101.camel@Palantir/ Fixes: 332ac17ef5bf ("sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks") Signed-off-by: Peng Liu Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Daniel Bristot de Oliveira Acked-by: Juri Lelli Link: https://lkml.kernel.org/r/db6bbda316048cda7a1bbc9571defde193a8d67e.1602171061.git.iwtbavbm@gmail.com Signed-off-by: Sasha Levin

kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling

2020-12-30T10:25:45Z

[ Upstream commit 8ff00399b153440c1c83e20c43020385b416415b ] powerpc/64s keeps a counter in the mm which counts bits set in mm_cpumask as well as other things. This means it can't use generic code to clear bits out of the mask and doesn't adjust the arch specific counter. Add an arch override that allows powerpc/64s to use clear_tasks_mm_cpumask(). Signed-off-by: Nicholas Piggin Reviewed-by: Aneesh Kumar K.V Acked-by: Peter Zijlstra (Intel) Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com Signed-off-by: Sasha Levin

tracing: Fix userstacktrace option for instances

2020-12-11T12:25:03Z

commit bcee5278958802b40ee8b26679155a6d9231783e upstream. When the instances were able to use their own options, the userstacktrace option was left hardcoded for the top level. This made the instance userstacktrace option bascially into a nop, and will confuse users that set it, but nothing happens (I was confused when it happened to me!) Cc: stable@vger.kernel.org Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

ftrace: Fix updating FTRACE_FL_TRAMP

2020-12-11T12:25:01Z

commit 4c75b0ff4e4bf7a45b5aef9639799719c28d0073 upstream. On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in ftrace_get_addr_new() followed by the below message: Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001) The set of steps leading to this involved: - modprobe ftrace-direct-too - enable_probe - modprobe ftrace-direct - rmmod ftrace-direct <-- trigger The problem turned out to be that we were not updating flags in the ftrace record properly. From the above message about the trampoline accounting being bad, it can be seen that the ftrace record still has FTRACE_FL_TRAMP set though ftrace-direct module is going away. This happens because we are checking if any ftrace_ops has the FTRACE_FL_TRAMP flag set _before_ updating the filter hash. The fix for this is to look for any _other_ ftrace_ops that also needs FTRACE_FL_TRAMP. Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one") Signed-off-by: Naveen N. Rao Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing: Remove WARN_ON in start_thread()

2020-12-08T09:18:55Z

commit 310e3a4b5a4fc718a72201c1e4cf5c64ac6f5442 upstream. This patch reverts commit 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") .start hook can be legally called several times if according tracer is stopped screen window 1 [root@localhost ~]# echo 1 > /sys/kernel/tracing/events/kmem/kfree/enable [root@localhost ~]# echo 1 > /sys/kernel/tracing/options/pause-on-trace [root@localhost ~]# less -F /sys/kernel/tracing/trace screen window 2 [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo hwlat > /sys/kernel/debug/tracing/current_tracer [root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/tracing_on [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo 2 > /sys/kernel/debug/tracing/tracing_on triggers warning in dmesg: WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0 Link: https://lkml.kernel.org/r/bd4d3e70-400d-9c82-7b73-a2d695e86b58@virtuozzo.com Cc: Ingo Molnar Cc: stable@vger.kernel.org Fixes: 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") Signed-off-by: Vasily Averin Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman