user/sven/linux.git/kernel, branch v4.19.197

kthread: prevent deadlock when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()

2021-07-11T10:49:31Z

commit 5fa54346caf67b4b1b10b1f390316ae466da4d53 upstream. The system might hang with the following backtrace: schedule+0x80/0x100 schedule_timeout+0x48/0x138 wait_for_common+0xa4/0x134 wait_for_completion+0x1c/0x2c kthread_flush_work+0x114/0x1cc kthread_cancel_work_sync.llvm.16514401384283632983+0xe8/0x144 kthread_cancel_delayed_work_sync+0x18/0x2c xxxx_pm_notify+0xb0/0xd8 blocking_notifier_call_chain_robust+0x80/0x194 pm_notifier_call_chain_robust+0x28/0x4c suspend_prepare+0x40/0x260 enter_state+0x80/0x3f4 pm_suspend+0x60/0xdc state_store+0x108/0x144 kobj_attr_store+0x38/0x88 sysfs_kf_write+0x64/0xc0 kernfs_fop_write_iter+0x108/0x1d0 vfs_write+0x2f4/0x368 ksys_write+0x7c/0xec It is caused by the following race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync(): CPU0 CPU1 Context: Thread A Context: Thread B kthread_mod_delayed_work() spin_lock() __kthread_cancel_work() spin_unlock() del_timer_sync() kthread_cancel_delayed_work_sync() spin_lock() __kthread_cancel_work() spin_unlock() del_timer_sync() spin_lock() work->canceling++ spin_unlock spin_lock() queue_delayed_work() // dwork is put into the worker->delayed_work_list spin_unlock() kthread_flush_work() // flush_work is put at the tail of the dwork wait_for_completion() Context: IRQ kthread_delayed_work_timer_fn() spin_lock() list_del_init(&work->node); spin_unlock() BANG: flush_work is not longer linked and will never get proceed. The problem is that kthread_mod_delayed_work() checks work->canceling flag before canceling the timer. A simple solution is to (re)check work->canceling after __kthread_cancel_work(). But then it is not clear what should be returned when __kthread_cancel_work() removed the work from the queue (list) and it can't queue it again with the new @delay. The return value might be used for reference counting. The caller has to know whether a new work has been queued or an existing one was replaced. The proper solution is that kthread_mod_delayed_work() will remove the work from the queue (list) _only_ when work->canceling is not set. The flag must be checked after the timer is stopped and the remaining operations can be done under worker->lock. Note that kthread_mod_delayed_work() could remove the timer and then bail out. It is fine. The other canceling caller needs to cancel the timer as well. The important thing is that the queue (list) manipulation is done atomically under worker->lock. Link: https://lkml.kernel.org/r/20210610133051.15337-3-pmladek@suse.com Fixes: 9a6b06c8d9a220860468a ("kthread: allow to modify delayed kthread work") Signed-off-by: Petr Mladek Reported-by: Martin Liu Cc: Cc: Minchan Kim Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Oleg Nesterov Cc: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

kthread_worker: split code for canceling the delayed work timer

2021-07-11T10:49:31Z

commit 34b3d5344719d14fd2185b2d9459b3abcb8cf9d8 upstream. Patch series "kthread_worker: Fix race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync()". This patchset fixes the race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync() including proper return value handling. This patch (of 2): Simple code refactoring as a preparation step for fixing a race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync(). It does not modify the existing behavior. Link: https://lkml.kernel.org/r/20210610133051.15337-2-pmladek@suse.com Signed-off-by: Petr Mladek Cc: Cc: Martin Liu Cc: Minchan Kim Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Oleg Nesterov Cc: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm, futex: fix shared futex pgoff on shmem huge page

2021-07-11T10:49:30Z

[ Upstream commit fe19bd3dae3d15d2fbfdb3de8839a6ea0fe94264 ] If more than one futex is placed on a shmem huge page, it can happen that waking the second wakes the first instead, and leaves the second waiting: the key's shared.pgoff is wrong. When 3.11 commit 13d60f4b6ab5 ("futex: Take hugepages into account when generating futex_key"), the only shared huge pages came from hugetlbfs, and the code added to deal with its exceptional page->index was put into hugetlb source. Then that was missed when 4.8 added shmem huge pages. page_to_pgoff() is what others use for this nowadays: except that, as currently written, it gives the right answer on hugetlbfs head, but nonsense on hugetlbfs tails. Fix that by calling hugetlbfs-specific hugetlb_basepage_index() on PageHuge tails as well as on head. Yes, it's unconventional to declare hugetlb_basepage_index() there in pagemap.h, rather than in hugetlb.h; but I do not expect anything but page_to_pgoff() ever to need it. [akpm@linux-foundation.org: give hugetlb_basepage_index() prototype the correct scope] Link: https://lkml.kernel.org/r/b17d946b-d09-326e-b42a-52884c36df32@google.com Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Reported-by: Neel Natu Signed-off-by: Hugh Dickins Reviewed-by: Matthew Wilcox (Oracle) Acked-by: Thomas Gleixner Cc: "Kirill A. Shutemov" Cc: Zhang Yi Cc: Mel Gorman Cc: Mike Kravetz Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Darren Hart Cc: Davidlohr Bueso Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Note on stable backport: leave redundant #include in kernel/futex.c, to avoid conflict over the header files included. Signed-off-by: Hugh Dickins Signed-off-by: Sasha Levin

module: limit enabling module.sig_enforce

2021-06-30T12:48:28Z

[ Upstream commit 0c18f29aae7ce3dadd26d8ee3505d07cc982df75 ] Irrespective as to whether CONFIG_MODULE_SIG is configured, specifying "module.sig_enforce=1" on the boot command line sets "sig_enforce". Only allow "sig_enforce" to be set when CONFIG_MODULE_SIG is configured. This patch makes the presence of /sys/module/module/parameters/sig_enforce dependent on CONFIG_MODULE_SIG=y. Fixes: fda784e50aac ("module: export module signature enforcement status") Reported-by: Nayna Jain Tested-by: Mimi Zohar Tested-by: Jessica Yu Signed-off-by: Mimi Zohar Signed-off-by: Jessica Yu Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

tracing: Do no increment trace_clock_global() by one

2021-06-30T12:48:23Z

commit 89529d8b8f8daf92d9979382b8d2eb39966846ea upstream. The trace_clock_global() tries to make sure the events between CPUs is somewhat in order. A global value is used and updated by the latest read of a clock. If one CPU is ahead by a little, and is read by another CPU, a lock is taken, and if the timestamp of the other CPU is behind, it will simply use the other CPUs timestamp. The lock is also only taken with a "trylock" due to tracing, and strange recursions can happen. The lock is not taken at all in NMI context. In the case where the lock is not able to be taken, the non synced timestamp is returned. But it will not be less than the saved global timestamp. The problem arises because when the time goes "backwards" the time returned is the saved timestamp plus 1. If the lock is not taken, and the plus one to the timestamp is returned, there's a small race that can cause the time to go backwards! CPU0 CPU1 ---- ---- trace_clock_global() { ts = clock() [ 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] trace_clock_global() { ts = clock() [ 999 ] if (ts < global_ts) ts = global_ts + 1 [ 1001 ] trylock(clock_lock) [ fail ] return ts [ 1001] } unlock(clock_lock); return ts; [ 1000 ] } trace_clock_global() { ts = clock() [ 1000 ] if (ts < global_ts) [ false 1000 == 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] unlock(clock_lock) return ts; [ 1000 ] } The above case shows to reads of trace_clock_global() on the same CPU, but the second read returns one less than the first read. That is, time when backwards, and this is not what is allowed by trace_clock_global(). This was triggered by heavy tracing and the ring buffer checker that tests for the clock going backwards: Ring buffer clock went backwards: 20613921464 -> 20613921463 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0 Modules linked in: [..] [CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463 [20613915818] PAGE TIME STAMP [20613915818] delta:0 [20613915819] delta:1 [20613916035] delta:216 [20613916465] delta:430 [20613916575] delta:110 [20613916749] delta:174 [20613917248] delta:499 [20613917333] delta:85 [20613917775] delta:442 [20613917921] delta:146 [20613918321] delta:400 [20613918568] delta:247 [20613918768] delta:200 [20613919306] delta:538 [20613919353] delta:47 [20613919980] delta:627 [20613920296] delta:316 [20613920571] delta:275 [20613920862] delta:291 [20613921152] delta:290 [20613921464] delta:312 [20613921464] delta:0 TIME EXTEND [20613921464] delta:0 This happened more than once, and always for an off by one result. It also started happening after commit aafe104aa9096 was added. Cc: stable@vger.kernel.org Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing: Do not stop recording comms if the trace file is being read

2021-06-30T12:48:23Z

commit 4fdd595e4f9a1ff6d93ec702eaecae451cfc6591 upstream. A while ago, when the "trace" file was opened, tracing was stopped, and code was added to stop recording the comms to saved_cmdlines, for mapping of the pids to the task name. Code has been added that only records the comm if a trace event occurred, and there's no reason to not trace it if the trace file is opened. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing: Do not stop recording cmdlines when tracing is off

2021-06-30T12:48:23Z

commit 85550c83da421fb12dc1816c45012e1e638d2b38 upstream. The saved_cmdlines is used to map pids to the task name, such that the output of the tracing does not just show pids, but also gives a human readable name for the task. If the name is not mapped, the output looks like this: <...>-1316 [005] ...2 132.044039: ... Instead of this: gnome-shell-1316 [005] ...2 132.044039: ... The names are updated when tracing is running, but are skipped if tracing is stopped. Unfortunately, this stops the recording of the names if the top level tracer is stopped, and not if there's other tracers active. The recording of a name only happens when a new event is written into a ring buffer, so there is no need to test if tracing is on or not. If tracing is off, then no event is written and no need to test if tracing is off or not. Remove the check, as it hides the names of tasks for events in the instance buffers. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing: Correct the length check which causes memory corruption

2021-06-16T09:55:02Z

commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream. We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow. Link: https://lkml.kernel.org/r/20210607125734.1770447-1-liangyan.peng@linux.alibaba.com Cc: stable@vger.kernel.org Cc: Ingo Molnar Cc: Xunlei Pang Cc: Greg Kroah-Hartman Fixes: b220c049d519 ("tracing: Check length before giving out the filter buffer") Reviewed-by: Xunlei Pang Reviewed-by: yinbinbin Reviewed-by: Wetp Zhang Tested-by: James Wang Signed-off-by: Liangyan Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

ftrace: Do not blindly read the ip address in ftrace_bug()

2021-06-16T09:55:02Z

commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream. It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location. Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/ Cc: stable@vger.kernel.org Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers") Reported-by: Mark-PK Tsai Tested-by: Mark-PK Tsai Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

sched/fair: Make sure to update tg contrib for blocked load

2021-06-16T09:55:01Z

commit 02da26ad5ed6ea8680e5d01f20661439611ed776 upstream. During the update of fair blocked load (__update_blocked_fair()), we update the contribution of the cfs in tg->load_avg if cfs_rq's pelt has decayed. Nevertheless, the pelt values of a cfs_rq could have been recently updated while propagating the change of a child. In this case, cfs_rq's pelt will not decayed because it has already been updated and we don't update tg->load_avg. __update_blocked_fair ... for_each_leaf_cfs_rq_safe: child cfs_rq update cfs_rq_load_avg() for child cfs_rq ... update_load_avg(cfs_rq_of(se), se, 0) ... update cfs_rq_load_avg() for parent cfs_rq -propagation of child's load makes parent cfs_rq->load_sum becoming null -UPDATE_TG is not set so it doesn't update parent cfs_rq->tg_load_avg_contrib .. for_each_leaf_cfs_rq_safe: parent cfs_rq update cfs_rq_load_avg() for parent cfs_rq - nothing to do because parent cfs_rq has already been updated recently so cfs_rq->tg_load_avg_contrib is not updated ... parent cfs_rq is decayed list_del_leaf_cfs_rq parent cfs_rq - but it still contibutes to tg->load_avg we must set UPDATE_TG flags when propagting pending load to the parent Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path") Reported-by: Odin Ugedal Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Odin Ugedal Link: https://lkml.kernel.org/r/20210527122916.27683-3-vincent.guittot@linaro.org Signed-off-by: Greg Kroah-Hartman