user/sven/linux.git/kernel, branch v4.9.160

signal: Restore the stop PTRACE_EVENT_EXIT

2019-02-20T09:18:33Z

commit cf43a757fd49442bc38f76088b70c2299eed2c2f upstream. In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by: Oleg Nesterov Reported-by: Oleg Nesterov Reported-by: Ivan Delalande Cc: stable@vger.kernel.org Fixes: 35634ffa1751 ("signal: Always notice exiting tasks") Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman

tracing/uprobes: Fix output for multiple string arguments

2019-02-20T09:18:32Z

commit 0722069a5374b904ec1a67f91249f90e1cfae259 upstream. When printing multiple uprobe arguments as strings the output for the earlier arguments would also include all later string arguments. This is best explained in an example: Consider adding a uprobe to a function receiving two strings as parameters which is at offset 0xa0 in strlib.so and we want to print both parameters when the uprobe is hit (on x86_64): $ echo 'p:func /lib/strlib.so:0xa0 +0(%di):string +0(%si):string' > \ /sys/kernel/debug/tracing/uprobe_events When the function is called as func("foo", "bar") and we hit the probe, the trace file shows a line like the following: [...] func: (0x7f7e683706a0) arg1="foobar" arg2="bar" Note the extra "bar" printed as part of arg1. This behaviour stacks up for additional string arguments. The strings are stored in a dynamically growing part of the uprobe buffer by fetch_store_string() after copying them from userspace via strncpy_from_user(). The return value of strncpy_from_user() is then directly used as the required size for the string. However, this does not take the terminating null byte into account as the documentation for strncpy_from_user() cleary states that it "[...] returns the length of the string (not including the trailing NUL)" even though the null byte will be copied to the destination. Therefore, subsequent calls to fetch_store_string() will overwrite the terminating null byte of the most recently fetched string with the first character of the current string, leading to the "accumulation" of strings in earlier arguments in the output. Fix this by incrementing the return value of strncpy_from_user() by one if we did not hit the maximum buffer size. Link: http://lkml.kernel.org/r/20190116141629.5752-1-andreas.ziegler@fau.de Cc: Ingo Molnar Cc: stable@vger.kernel.org Fixes: 5baaa59ef09e ("tracing/probes: Implement 'memory' fetch method for uprobes") Acked-by: Masami Hiramatsu Signed-off-by: Andreas Ziegler Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Masami Hiramatsu Signed-off-by: Greg Kroah-Hartman

perf/x86: Add check_period PMU callback

2019-02-20T09:18:31Z

commit 81ec3f3c4c4d78f2d3b6689c9816bfbdf7417dbb upstream. Vince (and later on Ravi) reported crashes in the BTS code during fuzzing with the following backtrace: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:perf_prepare_sample+0x8f/0x510 ... Call Trace: ? intel_pmu_drain_bts_buffer+0x194/0x230 intel_pmu_drain_bts_buffer+0x160/0x230 ? tick_nohz_irq_exit+0x31/0x40 ? smp_call_function_single_interrupt+0x48/0xe0 ? call_function_single_interrupt+0xf/0x20 ? call_function_single_interrupt+0xa/0x20 ? x86_schedule_events+0x1a0/0x2f0 ? x86_pmu_commit_txn+0xb4/0x100 ? find_busiest_group+0x47/0x5d0 ? perf_event_set_state.part.42+0x12/0x50 ? perf_mux_hrtimer_restart+0x40/0xb0 intel_pmu_disable_event+0xae/0x100 ? intel_pmu_disable_event+0xae/0x100 x86_pmu_stop+0x7a/0xb0 x86_pmu_del+0x57/0x120 event_sched_out.isra.101+0x83/0x180 group_sched_out.part.103+0x57/0xe0 ctx_sched_out+0x188/0x240 ctx_resched+0xa8/0xd0 __perf_event_enable+0x193/0x1e0 event_function+0x8e/0xc0 remote_function+0x41/0x50 flush_smp_call_function_queue+0x68/0x100 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x3e/0xe0 call_function_single_interrupt+0xf/0x20 The reason is that while event init code does several checks for BTS events and prevents several unwanted config bits for BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows to create BTS event without those checks being done. Following sequence will cause the crash: If we create an 'almost' BTS event with precise_ip and callchains, and it into a BTS event it will crash the perf_prepare_sample() function because precise_ip events are expected to come in with callchain data initialized, but that's not the case for intel_pmu_drain_bts_buffer() caller. Adding a check_period callback to be called before the period is changed via PERF_EVENT_IOC_PERIOD. It will deny the change if the event would become BTS. Plus adding also the limit_period check as well. Reported-by: Vince Weaver Signed-off-by: Jiri Olsa Acked-by: Peter Zijlstra Cc: Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Naveen N. Rao Cc: Ravi Bangoria Cc: Stephane Eranian Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

perf/core: Fix impossible ring-buffer sizes warning

2019-02-20T09:18:31Z

commit 528871b456026e6127d95b1b2bd8e3a003dc1614 upstream. The following commit: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes") results in perf recording failures with larger mmap areas: root@skl:/tmp# perf record -g -a failed to mmap with 12 (Cannot allocate memory) The root cause is that the following condition is buggy: if (order_base_2(size) >= MAX_ORDER) goto fail; The problem is that @size is in bytes and MAX_ORDER is in pages, so the right test is: if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER) goto fail; Fix it. Reported-by: "Jin, Yao" Bisected-by: Borislav Petkov Analyzed-by: Peter Zijlstra Cc: Julien Thierry Cc: Mark Rutland Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Greg Kroah-Hartman Cc: Fixes: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes") Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

signal: Better detection of synchronous signals

2019-02-15T07:07:37Z

commit 7146db3317c67b517258cb5e1b08af387da0618b upstream. Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals") Tested-by: Dmitry Vyukov Reported-by: Dmitry Vyukov Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman

signal: Always notice exiting tasks

2019-02-15T07:07:37Z

commit 35634ffa1751b6efd8cf75010b509dcb0263e29b upstream. Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov Reported-by: Dmitry Vyukov Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman

perf/core: Don't WARN() for impossible ring-buffer sizes

2019-02-12T18:45:01Z

commit 9dff0aa95a324e262ffb03f425d00e4751f3294e upstream. The perf tool uses /proc/sys/kernel/perf_event_mlock_kb to determine how large its ringbuffer mmap should be. This can be configured to arbitrary values, which can be larger than the maximum possible allocation from kmalloc. When this is configured to a suitably large value (e.g. thanks to the perf fuzzer), attempting to use perf record triggers a WARN_ON_ONCE() in __alloc_pages_nodemask(): WARNING: CPU: 2 PID: 5666 at mm/page_alloc.c:4511 __alloc_pages_nodemask+0x3f8/0xbc8 Let's avoid this by checking that the requested allocation is possible before calling kzalloc. Reported-by: Julien Thierry Signed-off-by: Mark Rutland Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Julien Thierry Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Link: https://lkml.kernel.org/r/20190110142745.25495-1-mark.rutland@arm.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

proc/sysctl: fix return error for proc_doulongvec_minmax()

2019-02-12T18:44:59Z

[ Upstream commit 09be178400829dddc1189b50a7888495dd26aa84 ] If the number of input parameters is less than the total parameters, an EINVAL error will be returned. For example, we use proc_doulongvec_minmax to pass up to two parameters with kern_table: { .procname = "monitor_signals", .data = &monitor_sigs, .maxlen = 2*sizeof(unsigned long), .mode = 0644, .proc_handler = proc_doulongvec_minmax, }, Reproduce: When passing two parameters, it's work normal. But passing only one parameter, an error "Invalid argument"(EINVAL) is returned. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals -bash: echo: write error: Invalid argument [root@cl150 ~]# echo $? 1 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# The following is the result after apply this patch. No error is returned when the number of input parameters is less than the total parameters. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# echo $? 0 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# There are three processing functions dealing with digital parameters, __do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax. This patch deals with __do_proc_doulongvec_minmax, just as __do_proc_dointvec does, adding a check for parameters 'left'. In __do_proc_douintvec, its code implementation explicitly does not support multiple inputs. static int __do_proc_douintvec(...){ ... /* * Arrays are not supported, keep this simple. *Do not* add * support for them. */ if (vleft != 1) { *lenp = 0; return -EINVAL; } ... } So, just __do_proc_doulongvec_minmax has the problem. And most use of proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one parameter. Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cn Signed-off-by: Cheng Lin Acked-by: Luis Chamberlain Reviewed-by: Kees Cook Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

kernel/hung_task.c: break RCU locks based on jiffies

2019-02-12T18:44:59Z

[ Upstream commit 304ae42739b108305f8d7b3eb3c1aec7c2b643a9 ] check_hung_uninterruptible_tasks() is currently calling rcu_lock_break() for every 1024 threads. But check_hung_task() is very slow if printk() was called, and is very fast otherwise. If many threads within some 1024 threads called printk(), the RCU grace period might be extended enough to trigger RCU stall warnings. Therefore, calling rcu_lock_break() for every some fixed jiffies will be safer. Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa Acked-by: Paul E. McKenney Cc: Petr Mladek Cc: Sergey Senozhatsky Cc: Dmitry Vyukov Cc: "Rafael J. Wysocki" Cc: Vitaly Kuznetsov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

timekeeping: Use proper seqcount initializer

2019-02-12T18:44:54Z

[ Upstream commit ce10a5b3954f2514af726beb78ed8d7350c5e41c ] tk_core.seq is initialized open coded, but that misses to initialize the lockdep map when lockdep is enabled. Lockdep splats involving tk_core seq consequently lack a name and are hard to read. Use the proper initializer which takes care of the lockdep map initialization. [ tglx: Massaged changelog ] Signed-off-by: Bart Van Assche Signed-off-by: Thomas Gleixner Cc: peterz@infradead.org Cc: tj@kernel.org Cc: johannes.berg@intel.com Link: https://lkml.kernel.org/r/20181128234325.110011-12-bvanassche@acm.org Signed-off-by: Sasha Levin