user/sven/linux.git/kernel, branch v4.9.180

rcuperf: Fix cleanup path for invalid perf_type strings

2019-05-31T13:48:30Z

[ Upstream commit ad092c027713a68a34168942a5ef422e42e039f4 ] If the specified rcuperf.perf_type is not in the rcu_perf_init() function's perf_ops[] array, rcuperf prints some console messages and then invokes rcu_perf_cleanup() to set state so that a future torture test can run. However, rcu_perf_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Signed-off-by: Paul E. McKenney Signed-off-by: Sasha Levin

rcutorture: Fix cleanup path for invalid torture_type strings

2019-05-31T13:48:30Z

[ Upstream commit b813afae7ab6a5e91b4e16cc567331d9c2ae1f04 ] If the specified rcutorture.torture_type is not in the rcu_torture_init() function's torture_ops[] array, rcutorture prints some console messages and then invokes rcu_torture_cleanup() to set state so that a future torture test can run. However, rcu_torture_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_torture_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Reported-by: kernel test robot Signed-off-by: Paul E. McKenney Signed-off-by: Sasha Levin

sched/core: Handle overflow in cpu_shares_write_u64

2019-05-31T13:48:22Z

[ Upstream commit 5b61d50ab4ef590f5e1d4df15cd2cea5f5715308 ] Bit shift in scale_load() could overflow shares. This patch saturates it to MAX_SHARES like following sched_group_set_shares(). Example: # echo 9223372036854776832 > cpu.shares # cat cpu.shares Before patch: 1024 After pattch: 262144 Signed-off-by: Konstantin Khlebnikov Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/155125501891.293431.3345233332801109696.stgit@buzz Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

sched/core: Check quota and period overflow at usec to nsec conversion

2019-05-31T13:48:22Z

[ Upstream commit 1a8b4540db732ca16c9e43ac7c08b1b8f0b252d8 ] Large values could overflow u64 and pass following sanity checks. # echo 18446744073750000 > cpu.cfs_period_us # cat cpu.cfs_period_us 40448 # echo 18446744073750000 > cpu.cfs_quota_us # cat cpu.cfs_quota_us 40448 After this patch they will fail with -EINVAL. Signed-off-by: Konstantin Khlebnikov Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/155125502079.293431.3947497929372138600.stgit@buzz Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

audit: fix a memory leak bug

2019-05-31T13:48:20Z

[ Upstream commit 70c4cf17e445264453bc5323db3e50aa0ac9e81f ] In audit_rule_change(), audit_data_to_entry() is firstly invoked to translate the payload data to the kernel's rule representation. In audit_data_to_entry(), depending on the audit field type, an audit tree may be created in audit_make_tree(), which eventually invokes kmalloc() to allocate the tree. Since this tree is a temporary tree, it will be then freed in the following execution, e.g., audit_add_rule() if the message type is AUDIT_ADD_RULE or audit_del_rule() if the message type is AUDIT_DEL_RULE. However, if the message type is neither AUDIT_ADD_RULE nor AUDIT_DEL_RULE, i.e., the default case of the switch statement, this temporary tree is not freed. To fix this issue, only allocate the tree when the type is AUDIT_ADD_RULE or AUDIT_DEL_RULE. Signed-off-by: Wenwen Wang Reviewed-by: Richard Guy Briggs Signed-off-by: Paul Moore Signed-off-by: Sasha Levin

tracing: Fix partial reading of trace event's id file

2019-05-25T16:26:49Z

commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 upstream. When reading only part of the id file, the ppos isn't tracked correctly. This is taken care by simple_read_from_buffer. Reading a single byte, and then the next byte would result EOF. While this seems like not a big deal, this breaks abstractions that reads information from files unbuffered. See for example https://github.com/golang/go/issues/29399 This code was mentioned as problematic in commit cd458ba9d5a5 ("tracing: Do not (ab)use trace_seq in event_id_read()") An example C code that show this bug is: #include #include #include #include #include #include int main(int argc, char **argv) { if (argc < 2) return 1; int fd = open(argv[1], O_RDONLY); char c; read(fd, &c, 1); printf("First %c\n", c); read(fd, &c, 1); printf("Second %c\n", c); } Then run with, e.g. sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id You'll notice you're getting the first character twice, instead of the first two characters in the id file. Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com Cc: Orit Wasserman Cc: Oleg Nesterov Cc: Ingo Molnar Cc: stable@vger.kernel.org Fixes: 23725aeeab10b ("ftrace: provide an id file for each event") Signed-off-by: Elazar Leibovich Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

locking/rwsem: Prevent decrement of reader count before increment

2019-05-21T16:48:55Z

[ Upstream commit a9e9bcb45b1525ba7aea26ed9441e8632aeeda58 ] During my rwsem testing, it was found that after a down_read(), the reader count may occasionally become 0 or even negative. Consequently, a writer may steal the lock at that time and execute with the reader in parallel thus breaking the mutual exclusion guarantee of the write lock. In other words, both readers and writer can become rwsem owners simultaneously. The current reader wakeup code does it in one pass to clear waiter->task and put them into wake_q before fully incrementing the reader count. Once waiter->task is cleared, the corresponding reader may see it, finish the critical section and do unlock to decrement the count before the count is incremented. This is not a problem if there is only one reader to wake up as the count has been pre-incremented by 1. It is a problem if there are more than one readers to be woken up and writer can steal the lock. The wakeup was actually done in 2 passes before the following v4.9 commit: 70800c3c0cc5 ("locking/rwsem: Scan the wait_list for readers only once") To fix this problem, the wakeup is now done in two passes again. In the first pass, we collect the readers and count them. The reader count is then fully incremented. In the second pass, the waiter->task is then cleared and they are put into wake_q to be woken up later. Signed-off-by: Waiman Long Acked-by: Linus Torvalds Cc: Borislav Petkov Cc: Davidlohr Bueso Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tim Chen Cc: Will Deacon Cc: huang ying Fixes: 70800c3c0cc5 ("locking/rwsem: Scan the wait_list for readers only once") Link: http://lkml.kernel.org/r/20190428212557.13482-2-longman@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

bpf: convert htab map to hlist_nulls

2019-05-16T17:43:40Z

commit 4fe8435909fddc97b81472026aa954e06dd192a5 upstream. when all map elements are pre-allocated one cpu can delete and reuse htab_elem while another cpu is still walking the hlist. In such case the lookup may miss the element. Convert hlist to hlist_nulls to avoid such scenario. When bucket lock is taken there is no need to take such precautions, so only convert map_lookup and map_get_next to nulls. The race window is extremely small and only reproducible with explicit udelay() inside lookup_nulls_elem_raw() Similar to hlist add hlist_nulls_for_each_entry_safe() and hlist_nulls_entry_safe() helpers. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Reported-by: Jonathan Perry Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller Signed-off-by: Chenbo Feng Signed-off-by: Sasha Levin

bpf: fix struct htab_elem layout

2019-05-16T17:43:40Z

commit 9f691549f76d488a0c74397b3e51e943865ea01f upstream. when htab_elem is removed from the bucket list the htab_elem.hash_node.next field should not be overridden too early otherwise we have a tiny race window between lookup and delete. The bug was discovered by manual code analysis and reproducible only with explicit udelay() in lookup_elem_raw(). Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Reported-by: Jonathan Perry Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller Signed-off-by: Chenbo Feng Signed-off-by: Sasha Levin

cpu/speculation: Add 'mitigations=' cmdline option

2019-05-14T17:19:41Z

commit 98af8452945c55652de68536afdde3b520fec429 upstream. Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina (on x86) Reviewed-by: Jiri Kosina Cc: Borislav Petkov Cc: "H . Peter Anvin" Cc: Andy Lutomirski Cc: Peter Zijlstra Cc: Jiri Kosina Cc: Waiman Long Cc: Andrea Arcangeli Cc: Jon Masters Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman Cc: Tyler Hicks Cc: Linus Torvalds Cc: Randy Dunlap Cc: Steven Price Cc: Phil Auld Link: https://lkml.kernel.org/r/b07a8ef9b7c5055c3a4637c87d07c296d5016fe0.1555085500.git.jpoimboe@redhat.com [bwh: Backported to 4.9: adjust filename] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman