user/sven/linux.git/kernel, branch v5.10.124

dma-direct: don't over-decrypt memory

2022-06-22T12:13:20Z

commit 4a37f3dd9a83186cb88d44808ab35b78375082c9 upstream. The original x86 sev_alloc() only called set_memory_decrypted() on memory returned by alloc_pages_node(), so the page order calculation fell out of that logic. However, the common dma-direct code has several potential allocators, not all of which are guaranteed to round up the underlying allocation to a power-of-two size, so carrying over that calculation for the encryption/decryption size was a mistake. Fix it by rounding to a *number* of pages, rather than an order. Until recently there was an even worse interaction with DMA_DIRECT_REMAP where we could have ended up decrypting part of the next adjacent vmalloc area, only averted by no architecture actually supporting both configs at once. Don't ask how I found that one out... Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code") Signed-off-by: Robin Murphy Signed-off-by: Christoph Hellwig Acked-by: David Rientjes [ backport the functional change without all the prior refactoring ] Signed-off-by: Robin Murphy Signed-off-by: Greg Kroah-Hartman

dma-debug: make things less spammy under memory pressure

2022-06-22T12:13:13Z

[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ] Limit the error msg to avoid flooding the console. If you have a lot of threads hitting this at once, they could have already gotten passed the dma_debug_disabled() check before they get to the point of allocation failure, resulting in quite a lot of this error message spamming the log. Use pr_err_once() to limit that. Signed-off-by: Rob Clark Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

bpf: Fix incorrect memory charge cost calculation in stack_map_alloc()

2022-06-22T12:13:12Z

commit b45043192b3e481304062938a6561da2ceea46a6 upstream. This is a backport of the original upstream patch for 5.4/5.10. The original upstream patch has been applied to 5.4/5.10 branches, which simply removed the line: cost += n_buckets * (value_size + sizeof(struct stack_map_bucket)); This is correct for upstream branch but incorrect for 5.4/5.10 branches, as the 5.4/5.10 branches do not have the commit 370868107bf6 ("bpf: Eliminate rlimit-based memory accounting for stackmap maps"), so the bpf_map_charge_init() function has not been removed. Currently the bpf_map_charge_init() function in 5.4/5.10 branches takes a wrong memory charge cost, the attr->max_entries * (sizeof(struct stack_map_bucket) + (u64)value_size)) part is missing, let's fix it. Cc: # 5.4.y Cc: # 5.10.y Signed-off-by: Yuntao Wang Signed-off-by: Greg Kroah-Hartman

tracing: Avoid adding tracer option before update_tracer_options

2022-06-14T16:32:38Z

[ Upstream commit ef9188bcc6ca1d8a2ad83e826b548e6820721061 ] To prepare for support asynchronous tracer_init_tracefs initcall, avoid calling create_trace_option_files before __update_tracer_options. Otherwise, create_trace_option_files will show warning because some tracers in trace_types list are already in tr->topts. For example, hwlat_tracer call register_tracer in late_initcall, and global_trace.dir is already created in tracing_init_dentry, hwlat_tracer will be put into tr->topts. Then if the __update_tracer_options is executed after hwlat_tracer registered, create_trace_option_files find that hwlat_tracer is already in tr->topts. Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot Signed-off-by: Mark-PK Tsai Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin

tracing: Fix sleeping function called from invalid context on RT kernel

2022-06-14T16:32:37Z

[ Upstream commit 12025abdc8539ed9d5014e2d647a3fd1bd3de5cd ] When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel, these locks are replaced with sleepable rt-spinlock, so the stack calltrace will be triggered. Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start tp_printk=1" enabled. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [] try_to_wake_up+0x7e/0xba0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl+0x60/0x8c dump_stack+0x10/0x12 __might_resched.cold+0x11d/0x155 rt_spin_lock+0x40/0x70 trace_event_buffer_commit+0x2fa/0x4c0 ? map_vsyscall+0x93/0x93 trace_event_raw_event_initcall_start+0xbe/0x110 ? perf_trace_initcall_finish+0x210/0x210 ? probe_sched_wakeup+0x34/0x40 ? ttwu_do_wakeup+0xda/0x310 ? trace_hardirqs_on+0x35/0x170 ? map_vsyscall+0x93/0x93 do_one_initcall+0x217/0x3c0 ? trace_event_raw_event_initcall_level+0x170/0x170 ? push_cpu_stop+0x400/0x400 ? cblist_init_generic+0x241/0x290 kernel_init_freeable+0x1ac/0x347 ? _raw_spin_unlock_irq+0x65/0x80 ? rest_init+0xf0/0xf0 kernel_init+0x1e/0x150 ret_from_fork+0x22/0x30 Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com Signed-off-by: Jun Miao Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin

bpf: Fix probe read error in ___bpf_prog_run()

2022-06-14T16:32:35Z

[ Upstream commit caff1fa4118cec4dfd4336521ebd22a6408a1e3e ] I think there is something wrong with BPF_PROBE_MEM in ___bpf_prog_run() in big-endian machine. Let's make a test and see what will happen if we want to load a 'u16' with BPF_PROBE_MEM. Let's make the src value '0x0001', the value of dest register will become 0x0001000000000000, as the value will be loaded to the first 2 byte of DST with following code: bpf_probe_read_kernel(&DST, SIZE, (const void *)(long) (SRC + insn->off)); Obviously, the value in DST is not correct. In fact, we can compare BPF_PROBE_MEM with LDX_MEM_H: DST = *(SIZE *)(unsigned long) (SRC + insn->off); If the memory load is done by LDX_MEM_H, the value in DST will be 0x1 now. And I think this error results in the test case 'test_bpf_sk_storage_map' failing: test_bpf_sk_storage_map:PASS:bpf_iter_bpf_sk_storage_map__open_and_load 0 nsec test_bpf_sk_storage_map:PASS:socket 0 nsec test_bpf_sk_storage_map:PASS:map_update 0 nsec test_bpf_sk_storage_map:PASS:socket 0 nsec test_bpf_sk_storage_map:PASS:map_update 0 nsec test_bpf_sk_storage_map:PASS:socket 0 nsec test_bpf_sk_storage_map:PASS:map_update 0 nsec test_bpf_sk_storage_map:PASS:attach_iter 0 nsec test_bpf_sk_storage_map:PASS:create_iter 0 nsec test_bpf_sk_storage_map:PASS:read 0 nsec test_bpf_sk_storage_map:FAIL:ipv6_sk_count got 0 expected 3 $10/26 bpf_iter/bpf_sk_storage_map:FAIL The code of the test case is simply, it will load sk->sk_family to the register with BPF_PROBE_MEM and check if it is AF_INET6. With this patch, now the test case 'bpf_iter' can pass: $10 bpf_iter:OK Fixes: 2a02759ef5f8 ("bpf: Add support for BTF pointers to interpreter") Signed-off-by: Menglong Dong Signed-off-by: Daniel Borkmann Reviewed-by: Jiang Biao Reviewed-by: Hao Peng Cc: Ilya Leoshkevich Link: https://lore.kernel.org/bpf/20220524021228.533216-1-imagedong@tencent.com Signed-off-by: Sasha Levin

ftrace: Clean up hash direct_functions on register failures

2022-06-09T08:21:26Z

commit 7d54c15cb89a29a5f59e5ffc9ee62e6591769ef1 upstream. We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b [ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0 [ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001 [ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0 [ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000 [ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000 [ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0 [ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ ] Call Trace: [ ] [ ] register_ftrace_direct+0x54/0x290 [ ] ? render_sigset_t+0xa0/0xa0 [ ] bpf_trampoline_update+0x3f5/0x4a0 [ ] ? 0xffffffffa00a3000 [ ] bpf_trampoline_link_prog+0xa9/0x140 [ ] bpf_tracing_prog_attach+0x1dc/0x450 [ ] bpf_raw_tracepoint_open+0x9a/0x1e0 [ ] ? find_held_lock+0x2d/0x90 [ ] ? lock_release+0x150/0x430 [ ] __sys_bpf+0xbd6/0x2700 [ ] ? lock_is_held_type+0xd8/0x130 [ ] __x64_sys_bpf+0x1c/0x20 [ ] do_syscall_64+0x3a/0x80 [ ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ ] RIP: 0033:0x7fa9421defa9 [ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...] [ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9 [ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011 [ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000 [ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001 [ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001 [ ] [ ] Modules linked in: klp_vm(OK) [ ] ---[ end trace 0000000000000000 ]--- One way to trigger this is: 1. load a livepatch that patches kernel function xxx; 2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now); 3. repeat #2 => gpf. This is because the entry is added to direct_functions, but not removed. Fix this by remove the entry from direct_functions when register_ftrace_direct fails. Also remove the last trailing space from ftrace.c, so we don't have to worry about it anymore. Link: https://lkml.kernel.org/r/20220524170839.900849-1-song@kernel.org Cc: stable@vger.kernel.org Fixes: 763e34e74bb7 ("ftrace: Add register_ftrace_direct()") Signed-off-by: Song Liu Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]

2022-06-09T08:21:26Z

commit 3e35142ef99fe6b4fe5d834ad43ee13cca10a2dc upstream. Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") [1], binutils (v2.36+) started dropping section symbols that it thought were unused. This isn't an issue in general, but with kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a separate .text.unlikely section and the section symbol ".text.unlikely" is being dropped. Due to this, recordmcount is unable to find a non-weak symbol in .text.unlikely to generate a relocation record against. Address this by dropping the weak attribute from these functions. Instead, follow the existing pattern of having architectures #define the name of the function they want to override in their headers. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1 [akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h] Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Michael Ellerman Signed-off-by: Naveen N. Rao Cc: "Eric W. Biederman" Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

tracing: Fix potential double free in create_var_ref()

2022-06-09T08:21:23Z

commit 99696a2592bca641eb88cc9a80c90e591afebd0f upstream. In create_var_ref(), init_var_ref() is called to initialize the fields of variable ref_field, which is allocated in the previous function call to create_hist_field(). Function init_var_ref() allocates the corresponding fields such as ref_field->system, but frees these fields when the function encounters an error. The caller later calls destroy_hist_field() to conduct error handling, which frees the fields and the variable itself. This results in double free of the fields which are already freed in the previous function. Fix this by storing NULL to the corresponding fields when they are freed in init_var_ref(). Link: https://lkml.kernel.org/r/20220425063739.3859998-1-keitasuzuki.park@sslab.ics.keio.ac.jp Fixes: 067fe038e70f ("tracing: Add variable reference handling to hist triggers") CC: stable@vger.kernel.org Reviewed-by: Masami Hiramatsu Reviewed-by: Tom Zanussi Signed-off-by: Keita Suzuki Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq

2022-06-09T08:21:02Z

[ Upstream commit 64eaf50731ac0a8c76ce2fedd50ef6652aabc5ff ] Since commit 23127296889f ("sched/fair: Update scale invariance of PELT") change to use rq_clock_pelt() instead of rq_clock_task(), we should also use rq_clock_pelt() for throttled_clock_task_time and throttled_clock_task accounting to get correct cfs_rq_clock_pelt() of throttled cfs_rq. And rename throttled_clock_task(_time) to be clock_pelt rather than clock_task. Fixes: 23127296889f ("sched/fair: Update scale invariance of PELT") Signed-off-by: Chengming Zhou Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Ben Segall Reviewed-by: Vincent Guittot Link: https://lore.kernel.org/r/20220408115309.81603-1-zhouchengming@bytedance.com Signed-off-by: Sasha Levin