user/sven/linux.git/kernel, branch v5.10.69

sched/idle: Make the idle timer expire in hard interrupt context

2021-09-26T12:09:02Z

[ Upstream commit 9848417926353daa59d2b05eb26e185063dbac6e ] The intel powerclamp driver will setup a per-CPU worker with RT priority. The worker will then invoke play_idle() in which it remains in the idle poll loop until it is stopped by the timer it started earlier. That timer needs to expire in hard interrupt context on PREEMPT_RT. Otherwise the timer will expire in ksoftirqd as a SOFT timer but that task won't be scheduled on the CPU because its priority is lower than the priority of the worker which is in the idle loop. Always expire the idle timer in hard interrupt context. Reported-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210906113034.jgfxrjdvxnjqgtmc@linutronix.de Signed-off-by: Sasha Levin

profiling: fix shift-out-of-bounds bugs

2021-09-26T12:08:58Z

commit 2d186afd04d669fe9c48b994c41a7405a3c9f16d upstream. Syzbot reported shift-out-of-bounds bug in profile_init(). The problem was in incorrect prof_shift. Since prof_shift value comes from userspace we need to clamp this value into [0, BITS_PER_LONG -1] boundaries. Second possible shiht-out-of-bounds was found by Tetsuo: sample_step local variable in read_profile() had "unsigned int" type, but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent possible shiht-out-of-bounds sample_step type was changed to "unsigned long". Also, "unsigned short int" will be sufficient for storing [0, BITS_PER_LONG] value, that's why there is no need for "unsigned long" prof_shift. Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com Suggested-by: Tetsuo Handa Signed-off-by: Pavel Skripkin Cc: Thomas Gleixner Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

prctl: allow to setup brk for et_dyn executables

2021-09-26T12:08:57Z

commit e1fbbd073137a9d63279f6bf363151a938347640 upstream. Keno Fischer reported that when a binray loaded via ld-linux-x the prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays before mm:end_data. For example a test program shows | # ~/t | | start_code 401000 | end_code 401a15 | start_stack 7ffce4577dd0 | start_data 403e10 | end_data 40408c | start_brk b5b000 | sbrk(0) b5b000 and when executed via ld-linux | # /lib64/ld-linux-x86-64.so.2 ~/t | | start_code 7fc25b0a4000 | end_code 7fc25b0c4524 | start_stack 7fffcc6b2400 | start_data 7fc25b0ce4c0 | end_data 7fc25b0cff98 | start_brk 55555710c000 | sbrk(0) 55555710c000 This of course prevent criu from restoring such programs. Looking into how kernel operates with brk/start_brk inside brk() syscall I don't see any problem if we allow to setup brk/start_brk without checking for end_data. Even if someone pass some weird address here on a purpose then the worst possible result will be an unexpected unmapping of existing vma (own vma, since prctl works with the callers memory) but test for RLIMIT_DATA is still valid and a user won't be able to gain more memory in case of expanding VMAs via new values shipped with prctl call. Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec") Signed-off-by: Cyrill Gorcunov Reported-by: Keno Fischer Acked-by: Andrey Vagin Tested-by: Andrey Vagin Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Kirill Tkhai Cc: Eric W. Biederman Cc: Pavel Tikhomirov Cc: Alexander Mikhalitsyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

tracing/boot: Fix a hist trigger dependency for boot time tracing

2021-09-22T10:28:03Z

[ Upstream commit 6fe7c745f2acb73e4cc961d7f91125eef5a8861f ] Fixes a build error when CONFIG_HIST_TRIGGERS=n with boot-time tracing. Since the trigger_process_regex() is defined only when CONFIG_HIST_TRIGGERS=y, if it is disabled, the 'actions' event option also must be disabled. Link: https://lkml.kernel.org/r/162856123376.203126.582144262622247352.stgit@devnote2 Fixes: 81a59555ff15 ("tracing/boot: Add per-event settings") Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin

tracing/probes: Reject events which have the same name of existing one

2021-09-22T10:28:00Z

[ Upstream commit 8e242060c6a4947e8ae7d29794af6a581db08841 ] Since kprobe_events and uprobe_events only check whether the other same-type probe event has the same name or not, if the user gives the same name of the existing tracepoint event (or the other type of probe events), it silently fails to create the tracefs entry (but registered.) as below. /sys/kernel/tracing # ls events/task/task_rename enable filter format hist id trigger /sys/kernel/tracing # echo p:task/task_rename vfs_read >> kprobe_events [ 113.048508] Could not create tracefs 'task_rename' directory /sys/kernel/tracing # cat kprobe_events p:task/task_rename vfs_read To fix this issue, check whether the existing events have the same name or not in trace_probe_register_event_call(). If exists, it rejects to register the new event. Link: https://lkml.kernel.org/r/162936876189.187130.17558311387542061930.stgit@devnote2 Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin

events: Reuse value read using READ_ONCE instead of re-reading it

2021-09-22T10:27:57Z

commit b89a05b21f46150ac10a962aa50109250b56b03b upstream. In perf_event_addr_filters_apply, the task associated with the event (event->ctx->task) is read using READ_ONCE at the beginning of the function, checked, and then re-read from event->ctx->task, voiding all guarantees of the checks. Reuse the value that was read by READ_ONCE to ensure the consistency of the task struct throughout the function. Fixes: 375637bc52495 ("perf/core: Introduce address range filtering") Signed-off-by: Baptiste Lepers Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com Signed-off-by: Greg Kroah-Hartman

memcg: enable accounting for pids in nested pid namespaces

2021-09-18T11:40:36Z

commit fab827dbee8c2e06ca4ba000fa6c48bcf9054aba upstream. Commit 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg") enabled memcg accounting for pids allocated from init_pid_ns.pid_cachep, but forgot to adjust the setting for nested pid namespaces. As a result, pid memory is not accounted exactly where it is really needed, inside memcg-limited containers with their own pid namespaces. Pid was one the first kernel objects enabled for memcg accounting. init_pid_ns.pid_cachep marked by SLAB_ACCOUNT and we can expect that any new pids in the system are memcg-accounted. Though recently I've noticed that it is wrong. nested pid namespaces creates own slab caches for pid objects, nested pids have increased size because contain id both for all parent and for own pid namespaces. The problem is that these slab caches are _NOT_ marked by SLAB_ACCOUNT, as a result any pids allocated in nested pid namespaces are not memcg-accounted. Pid struct in nested pid namespace consumes up to 500 bytes memory, 100000 such objects gives us up to ~50Mb unaccounted memory, this allow container to exceed assigned memcg limits. Link: https://lkml.kernel.org/r/8b6de616-fd1a-02c6-cbdb-976ecdcfa604@virtuozzo.com Fixes: 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg") Cc: stable@vger.kernel.org Signed-off-by: Vasily Averin Reviewed-by: Michal Koutný Reviewed-by: Shakeel Butt Acked-by: Christian Brauner Acked-by: Roman Gushchin Cc: Michal Hocko Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: initialize hugetlb_usage in mm_init

2021-09-18T11:40:36Z

commit 13db8c50477d83ad3e3b9b0ae247e5cd833a7ae4 upstream. After fork, the child process will get incorrect (2x) hugetlb_usage. If a process uses 5 2MB hugetlb pages in an anonymous mapping, HugetlbPages: 10240 kB and then forks, the child will show, HugetlbPages: 20480 kB The reason for double the amount is because hugetlb_usage will be copied from the parent and then increased when we copy page tables from parent to child. Child will have 2x actual usage. Fix this by adding hugetlb_count_init in mm_init. Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status") Signed-off-by: Liu Zixian Reviewed-by: Naoya Horiguchi Reviewed-by: Mike Kravetz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

workqueue: Fix possible memory leaks in wq_numa_init()

2021-09-18T11:40:23Z

[ Upstream commit f728c4a9e8405caae69d4bc1232c54ff57b5d20f ] In error handling branch "if (WARN_ON(node == NUMA_NO_NODE))", the previously allocated memories are not released. Doing this before allocating memory eliminates memory leaks. tj: Note that the condition only occurs when the arch code is pretty broken and the WARN_ON might as well be BUG_ON(). Signed-off-by: Zhen Lei Reviewed-by: Lai Jiangshan Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

rcu: Fix macro name CONFIG_TASKS_RCU_TRACE

2021-09-18T11:40:19Z

[ Upstream commit fed31a4dd3adb5455df7c704de2abb639a1dc1c0 ] This commit fixes several typos where CONFIG_TASKS_RCU_TRACE should instead be CONFIG_TASKS_TRACE_RCU. Among other things, these typos could cause CONFIG_TASKS_TRACE_RCU_READ_MB=y kernels to suffer from memory-ordering bugs that could result in false-positive quiescent states and too-short grace periods. Signed-off-by: Zhouyi Zhou Signed-off-by: Paul E. McKenney Signed-off-by: Sasha Levin