user/sven/linux.git/kernel, branch v5.10.99

cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

2022-02-08T17:30:41Z

commit 2bdfd2825c9662463371e6691b1a794e97fa36b4 upstream. It was found that a "suspicious RCU usage" lockdep warning was issued with the rcu_read_lock() call in update_sibling_cpumasks(). It is because the update_cpumasks_hier() function may sleep. So we have to release the RCU lock, call update_cpumasks_hier() and reacquire it afterward. Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks() instead of stating that in the comment. Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus") Signed-off-by: Waiman Long Tested-by: Phil Auld Reviewed-by: Phil Auld Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

bpf: Use VM_MAP instead of VM_ALLOC for ringbuf

2022-02-08T17:30:39Z

commit b293dcc473d22a62dc6d78de2b15e4f49515db56 upstream. After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com Signed-off-by: Hou Tao Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com Signed-off-by: Greg Kroah-Hartman

audit: improve audit queue handling when "audit=1" on cmdline

2022-02-08T17:30:34Z

commit f26d04331360d42dbd6b58448bd98e4edbfbe1c5 upstream. When an admin enables audit at early boot via the "audit=1" kernel command line the audit queue behavior is slightly different; the audit subsystem goes to greater lengths to avoid dropping records, which unfortunately can result in problems when the audit daemon is forcibly stopped for an extended period of time. This patch makes a number of changes designed to improve the audit queuing behavior so that leaving the audit daemon in a stopped state for an extended period does not cause a significant impact to the system. - kauditd_send_queue() is now limited to looping through the passed queue only once per call. This not only prevents the function from looping indefinitely when records are returned to the current queue, it also allows any recovery handling in kauditd_thread() to take place when kauditd_send_queue() returns. - Transient netlink send errors seen as -EAGAIN now cause the record to be returned to the retry queue instead of going to the hold queue. The intention of the hold queue is to store, perhaps for an extended period of time, the events which led up to the audit daemon going offline. The retry queue remains a temporary queue intended to protect against transient issues between the kernel and the audit daemon. - The retry queue is now limited by the audit_backlog_limit setting, the same as the other queues. This allows admins to bound the size of all of the audit queues on the system. - kauditd_rehold_skb() now returns records to the end of the hold queue to ensure ordering is preserved in the face of recent changes to kauditd_send_queue(). Cc: stable@vger.kernel.org Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking") Fixes: f4b3ee3c85551 ("audit: improve robustness of the audit queue handling") Reported-by: Gaosheng Cui Tested-by: Gaosheng Cui Reviewed-by: Richard Guy Briggs Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman

cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()

2022-02-05T11:37:56Z

commit c80d401c52a2d1baf2a5afeb06f0ffe678e56d23 upstream. subparts_cpus should be limited as a subset of cpus_allowed, but it is updated wrongly by using cpumask_andnot(). Use cpumask_and() instead to fix it. Fixes: ee8dde0cd2ce ("cpuset: Add new v2 cpuset.sched.partition flag") Signed-off-by: Tianchen Ding Reviewed-by: Waiman Long Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

cgroup-v1: Require capabilities to set release_agent

2022-02-05T11:37:55Z

commit 24f6008564183aa120d07c03d9289519c2fe02af upstream. The cgroup release_agent is called with call_usermodehelper. The function call_usermodehelper starts the release_agent with a full set fo capabilities. Therefore require capabilities when setting the release_agaent. Reported-by: Tabitha Sable Tested-by: Tabitha Sable Fixes: 81a6a5cdd2c5 ("Task Control Groups: automatic userspace notification of idle cgroups") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: "Eric W. Biederman" Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

psi: Fix uaf issue when psi trigger is destroyed while being polled

2022-02-05T11:37:55Z

commit a06247c6804f1a7c86a2e5398a4c1f1db1471848 upstream. With write operation on psi files replacing old trigger with a new one, the lifetime of its waitqueue is totally arbitrary. Overwriting an existing trigger causes its waitqueue to be freed and pending poll() will stumble on trigger->event_wait which was destroyed. Fix this by disallowing to redefine an existing psi trigger. If a write operation is used on a file descriptor with an already existing psi trigger, the operation will fail with EBUSY error. Also bypass a check for psi_disabled in the psi_trigger_destroy as the flag can be flipped after the trigger is created, leading to a memory leak. Fixes: 0e94682b73bf ("psi: introduce psi monitor") Reported-by: syzbot+cdb5dd11c97cc532efad@syzkaller.appspotmail.com Suggested-by: Linus Torvalds Analyzed-by: Eric Biggers Signed-off-by: Suren Baghdasaryan Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Eric Biggers Acked-by: Johannes Weiner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220111232309.1786347-1-surenb@google.com [surenb: backported to 5.10 kernel] CC: stable@vger.kernel.org # 5.10 Signed-off-by: Suren Baghdasaryan Signed-off-by: Greg Kroah-Hartman

sched/pelt: Relax the sync of util_sum with util_avg

2022-02-01T16:25:45Z

[ Upstream commit 98b0d890220d45418cfbc5157b3382e6da5a12ab ] Rick reported performance regressions in bugzilla because of cpu frequency being lower than before: https://bugzilla.kernel.org/show_bug.cgi?id=215045 He bisected the problem to: commit 1c35b07e6d39 ("sched/fair: Ensure _sum and _avg values stay consistent") This commit forces util_sum to be synced with the new util_avg after removing the contribution of a task and before the next periodic sync. By doing so util_sum is rounded to its lower bound and might lost up to LOAD_AVG_MAX-1 of accumulated contribution which has not yet been reflected in util_avg. Instead of always setting util_sum to the low bound of util_avg, which can significantly lower the utilization of root cfs_rq after propagating the change down into the hierarchy, we revert the change of util_sum and propagate the difference. In addition, we also check that cfs's util_sum always stays above the lower bound for a given util_avg as it has been observed that sched_entity's util_sum is sometimes above cfs one. Fixes: 1c35b07e6d39 ("sched/fair: Ensure _sum and _avg values stay consistent") Reported-by: Rick Yiu Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Dietmar Eggemann Tested-by: Sachin Sant Link: https://lkml.kernel.org/r/20220111134659.24961-2-vincent.guittot@linaro.org Signed-off-by: Sasha Levin

perf: Fix perf_event_read_local() time

2022-02-01T16:25:45Z

[ Upstream commit 09f5e7dc7ad705289e1b1ec065439aa3c42951c4 ] Time readers that cannot take locks (due to NMI etc..) currently make use of perf_event::shadow_ctx_time, which, for that event gives: time' = now + (time - timestamp) or, alternatively arranged: time' = time + (now - timestamp) IOW, the progression of time since the last time the shadow_ctx_time was updated. There's problems with this: A) the shadow_ctx_time is per-event, even though the ctx_time it reflects is obviously per context. The direct concequence of this is that the context needs to iterate all events all the time to keep the shadow_ctx_time in sync. B) even with the prior point, the context itself might not be active meaning its time should not advance to begin with. C) shadow_ctx_time isn't consistently updated when ctx_time is There are 3 users of this stuff, that suffer differently from this: - calc_timer_values() - perf_output_read() - perf_event_update_userpage() /* A */ - perf_event_read_local() /* A,B */ In particular, perf_output_read() doesn't suffer at all, because it's sample driven and hence only relevant when the event is actually running. This same was supposed to be true for perf_event_update_userpage(), after all self-monitoring implies the context is active *HOWEVER*, as per commit f79256532682 ("perf/core: fix userpage->time_enabled of inactive events") this goes wrong when combined with counter overcommit, in that case those events that do not get scheduled when the context becomes active (task events typically) miss out on the EVENT_TIME update and ENABLED time is inflated (for a little while) with the time the context was inactive. Once the event gets rotated in, this gets corrected, leading to a non-monotonic timeflow. perf_event_read_local() made things even worse, it can request time at any point, suffering all the problems perf_event_update_userpage() does and more. Because while perf_event_update_userpage() is limited by the context being active, perf_event_read_local() users have no such constraint. Therefore, completely overhaul things and do away with perf_event::shadow_ctx_time. Instead have regular context time updates keep track of this offset directly and provide perf_event_time_now() to complement perf_event_time(). perf_event_time_now() will, in adition to being context wide, also take into account if the context is active. For inactive context, it will not advance time. This latter property means the cgroup perf_cgroup_info context needs to grow addition state to track this. Additionally, since all this is strictly per-cpu, we can use barrier() to order context activity vs context time. Fixes: 7d9285e82db5 ("perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf event change needed for subsequent bpf helpers"") Signed-off-by: Peter Zijlstra (Intel) Tested-by: Song Liu Tested-by: Namhyung Kim Link: https://lkml.kernel.org/r/YcB06DasOBtU0b00@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin

kernel: delete repeated words in comments

2022-02-01T16:25:45Z

[ Upstream commit c034f48e99907d5be147ac8f0f3e630a9307c2be ] Drop repeated words in kernel/events/. {if, the, that, with, time} Drop repeated words in kernel/locking/. {it, no, the} Drop repeated words in kernel/sched/. {in, not} Link: https://lkml.kernel.org/r/20210127023412.26292-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap Acked-by: Will Deacon [kernel/locking/] Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Arnaldo Carvalho de Melo Cc: Will Deacon Cc: Mathieu Desnoyers Cc: "Paul E. McKenney" Cc: Juri Lelli Cc: Vincent Guittot Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask

2022-02-01T16:25:41Z

commit 809232619f5b15e31fb3563985e705454f32621f upstream. The membarrier command MEMBARRIER_CMD_QUERY allows querying the available membarrier commands. When the membarrier-rseq fence commands were added, a new MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK was introduced with the intent to expose them with the MEMBARRIER_CMD_QUERY command, the but it was never added to MEMBARRIER_CMD_BITMASK. The membarrier-rseq fence commands are therefore not wired up with the query command. Rename MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK to MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK (the bitmask is not a command per-se), and change the erroneous MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ_BITMASK (which does not actually exist) to MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ. Wire up MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK in MEMBARRIER_CMD_BITMASK. Fixing this allows discovering availability of the membarrier-rseq fence feature. Fixes: 2a36ab717e8f ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ") Signed-off-by: Mathieu Desnoyers Signed-off-by: Peter Zijlstra (Intel) Cc: # 5.10+ Link: https://lkml.kernel.org/r/20220117203010.30129-1-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman