user/sven/linux.git/kernel, branch v5.15.53

tick/nohz: unexport __init-annotated tick_nohz_full_setup()

2022-07-02T14:41:12Z

commit 2390095113e98fc52fffe35c5206d30d9efe3f78 upstream. EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. Fixes: ae9e557b5be2 ("time: Export tick start/stop functions for rcutorture") Reported-by: Linus Torvalds Signed-off-by: Masahiro Yamada Tested-by: Paul E. McKenney Signed-off-by: Linus Torvalds Cc: Thomas Backlund Signed-off-by: Greg Kroah-Hartman

dma-direct: use the correct size for dma_set_encrypted()

2022-06-29T07:03:31Z

commit 3be4562584bba603f33863a00c1c32eecf772ee6 upstream. The third parameter of dma_set_encrypted() is a size in bytes rather than the number of pages. Fixes: 4d0564785bb0 ("dma-direct: factor out dma_set_{de,en}crypted helpers") Signed-off-by: Dexuan Cui Reviewed-by: Robin Murphy Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman

tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher()

2022-06-29T07:03:20Z

commit cc72b72073ac982a954d3b43519ca1c28f03c27c upstream. There is a small chance that get_kretprobe(ri) returns NULL in kretprobe_dispatcher() when another CPU unregisters the kretprobe right after __kretprobe_trampoline_handler(). To avoid this issue, kretprobe_dispatcher() checks the get_kretprobe() return value again. And if it is NULL, it returns soon because that kretprobe is under unregistering process. This issue has been introduced when the kretprobe is decoupled from the struct kretprobe_instance by commit d741bf41d7c7 ("kprobes: Remove kretprobe hash"). Before that commit, the struct kretprob_instance::rp directly points the kretprobe and it is never be NULL. Link: https://lkml.kernel.org/r/165366693881.797669.16926184644089588731.stgit@devnote2 Reported-by: Yonghong Song Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash") Cc: Peter Zijlstra Cc: Ingo Molnar Cc: bpf Cc: Kernel Team Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu (Google) Acked-by: Jiri Olsa Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs

2022-06-25T13:18:40Z

commit f858c2b2ca04fc7ead291821a793638ae120c11d upstream. The verifier allows programs to call global functions as long as their argument types match, using BTF to check the function arguments. One of the allowed argument types to such global functions is PTR_TO_CTX; however the check for this fails on BPF_PROG_TYPE_EXT functions because the verifier uses the wrong type to fetch the vmlinux BTF ID for the program context type. This failure is seen when an XDP program is loaded using libxdp (which loads it as BPF_PROG_TYPE_EXT and attaches it to a global XDP type program). Fix the issue by passing in the target program type instead of the BPF_PROG_TYPE_EXT type to bpf_prog_get_ctx() when checking function argument compatibility. The first Fixes tag refers to the latest commit that touched the code in question, while the second one points to the code that first introduced the global function call verification. v2: - Use resolve_prog_type() Fixes: 3363bd0cfbb8 ("bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support") Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification") Reported-by: Simon Sundberg Signed-off-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/r/20220606075253.28422-1-toke@redhat.com Signed-off-by: Alexei Starovoitov [ backport: open-code missing resolve_prog_type() helper, resolve context diff ] Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Greg Kroah-Hartman

cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle

2022-06-22T12:22:04Z

commit 57cd6d157eb479f0a8e820fd36b7240845c8a937 upstream. RCU_NONIDLE usage during __cfi_slowpath_diag can result in an invalid RCU state in the cpuidle code path: WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:613 rcu_eqs_enter+0xe4/0x138 ... Call trace: rcu_eqs_enter+0xe4/0x138 rcu_idle_enter+0xa8/0x100 cpuidle_enter_state+0x154/0x3a8 cpuidle_enter+0x3c/0x58 do_idle.llvm.6590768638138871020+0x1f4/0x2ec cpu_startup_entry+0x28/0x2c secondary_start_kernel+0x1b8/0x220 __secondary_switched+0x94/0x98 Instead, call rcu_irq_enter/exit to wake up RCU only when needed and disable interrupts for the entire CFI shadow/module check when we do. Signed-off-by: Sami Tolvanen Link: https://lore.kernel.org/r/20220531175910.890307-1-samitolvanen@google.com Fixes: cf68fffb66d6 ("add support for Clang CFI") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman

sched: Fix balance_push() vs __sched_setscheduler()

2022-06-22T12:22:02Z

[ Upstream commit 04193d590b390ec7a0592630f46d559ec6564ba1 ] The purpose of balance_push() is to act as a filter on task selection in the case of CPU hotplug, specifically when taking the CPU out. It does this by (ab)using the balance callback infrastructure, with the express purpose of keeping all the unlikely/odd cases in a single place. In order to serve its purpose, the balance_push_callback needs to be (exclusively) on the callback list at all times (noting that the callback always places itself back on the list the moment it runs, also noting that when the CPU goes down, regular balancing concerns are moot, so ignoring them is fine). And here-in lies the problem, __sched_setscheduler()'s use of splice_balance_callbacks() takes the callbacks off the list across a lock-break, making it possible for, an interleaving, __schedule() to see an empty list and not get filtered. Fixes: ae7927023243 ("sched: Optimize finish_lock_switch()") Reported-by: Jing-Ting Wu Signed-off-by: Peter Zijlstra (Intel) Tested-by: Jing-Ting Wu Link: https://lkml.kernel.org/r/20220519134706.GH2578@worktop.programming.kicks-ass.net Signed-off-by: Sasha Levin

dma-debug: make things less spammy under memory pressure

2022-06-22T12:21:55Z

[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ] Limit the error msg to avoid flooding the console. If you have a lot of threads hitting this at once, they could have already gotten passed the dma_debug_disabled() check before they get to the point of allocation failure, resulting in quite a lot of this error message spamming the log. Use pr_err_once() to limit that. Signed-off-by: Rob Clark Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

tracing: Avoid adding tracer option before update_tracer_options

2022-06-14T16:36:14Z

[ Upstream commit ef9188bcc6ca1d8a2ad83e826b548e6820721061 ] To prepare for support asynchronous tracer_init_tracefs initcall, avoid calling create_trace_option_files before __update_tracer_options. Otherwise, create_trace_option_files will show warning because some tracers in trace_types list are already in tr->topts. For example, hwlat_tracer call register_tracer in late_initcall, and global_trace.dir is already created in tracing_init_dentry, hwlat_tracer will be put into tr->topts. Then if the __update_tracer_options is executed after hwlat_tracer registered, create_trace_option_files find that hwlat_tracer is already in tr->topts. Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot Signed-off-by: Mark-PK Tsai Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin

tracing: Fix sleeping function called from invalid context on RT kernel

2022-06-14T16:36:14Z

[ Upstream commit 12025abdc8539ed9d5014e2d647a3fd1bd3de5cd ] When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel, these locks are replaced with sleepable rt-spinlock, so the stack calltrace will be triggered. Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start tp_printk=1" enabled. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [] try_to_wake_up+0x7e/0xba0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl+0x60/0x8c dump_stack+0x10/0x12 __might_resched.cold+0x11d/0x155 rt_spin_lock+0x40/0x70 trace_event_buffer_commit+0x2fa/0x4c0 ? map_vsyscall+0x93/0x93 trace_event_raw_event_initcall_start+0xbe/0x110 ? perf_trace_initcall_finish+0x210/0x210 ? probe_sched_wakeup+0x34/0x40 ? ttwu_do_wakeup+0xda/0x310 ? trace_hardirqs_on+0x35/0x170 ? map_vsyscall+0x93/0x93 do_one_initcall+0x217/0x3c0 ? trace_event_raw_event_initcall_level+0x170/0x170 ? push_cpu_stop+0x400/0x400 ? cblist_init_generic+0x241/0x290 kernel_init_freeable+0x1ac/0x347 ? _raw_spin_unlock_irq+0x65/0x80 ? rest_init+0xf0/0xf0 kernel_init+0x1e/0x150 ret_from_fork+0x22/0x30 Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com Signed-off-by: Jun Miao Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin

tracing: Make tp_printk work on syscall tracepoints

2022-06-14T16:36:14Z

[ Upstream commit cb1c45fb68b8a4285ccf750842b1136f26cfe267 ] Currently the tp_printk option has no effect on syscall tracepoint. When adding the kernel option parameter tp_printk, then: echo 1 > /sys/kernel/debug/tracing/events/syscalls/enable When running any application, no trace information is printed on the terminal. Now added printk for syscall tracepoints. Link: https://lkml.kernel.org/r/20220410145025.681144-1-xiehuan09@gmail.com Signed-off-by: Jeff Xie Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin