user/sven/linux.git/kernel, branch v5.18.17

entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set

2022-08-11T11:20:41Z

[ Upstream commit 3e684903a8574ffc9475fdf13c4780a7adb506ad ] A livepatch transition may stall indefinitely when a kvm vCPU is heavily loaded. To the host, the vCPU task is a user thread which is spending a very long time in the ioctl(KVM_RUN) syscall. During livepatch transition, set_notify_signal() will be called on such tasks to interrupt the syscall so that the task can be transitioned. This interrupts guest execution, but when xfer_to_guest_mode_work() sees that TIF_NOTIFY_SIGNAL is set but not TIF_SIGPENDING it concludes that an exit to user mode is unnecessary, and guest execution is resumed without transitioning the task for the livepatch. This handling of TIF_NOTIFY_SIGNAL is incorrect, as set_notify_signal() is expected to break tasks out of interruptible kernel loops and cause them to return to userspace. Change xfer_to_guest_mode_work() to handle TIF_NOTIFY_SIGNAL the same as TIF_SIGPENDING, signaling to the vCPU run loop that an exit to userpsace is needed. Any pending task_work will be run when get_signal() is called from exit_to_user_mode_loop(), so there is no longer any need to run task work from xfer_to_guest_mode_work(). Suggested-by: "Eric W. Biederman" Cc: Petr Mladek Signed-off-by: Seth Forshee Message-Id: <20220504180840.2907296-1-sforshee@digitalocean.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by first waiter

2022-08-03T10:05:29Z

commit 6eebd5fb20838f5971ba17df9f55cc4f84a31053 upstream. With commit d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent"), the writer that sets the handoff bit can be interrupted out without clearing the bit if the wait queue isn't empty. This disables reader and writer optimistic lock spinning and stealing. Now if a non-first writer in the queue is somehow woken up or a new waiter enters the slowpath, it can't acquire the lock. This is not the case before commit d257cc8cb8d5 as the writer that set the handoff bit will clear it when exiting out via the out_nolock path. This is less efficient as the busy rwsem stays in an unlock state for a longer time. In some cases, this new behavior may cause lockups as shown in [1] and [2]. This patch allows a non-first writer to ignore the handoff bit if it is not originally set or initiated by the first waiter. This patch is shown to be effective in fixing the lockup problem reported in [1]. [1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/ [2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/ Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent") Signed-off-by: Waiman Long Signed-off-by: Peter Zijlstra (Intel) Acked-by: John Donnelly Tested-by: Mel Gorman Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com Signed-off-by: Greg Kroah-Hartman

watch_queue: Fix missing locking in add_watch_to_object()

2022-08-03T10:05:19Z

commit e64ab2dbd882933b65cd82ff6235d705ad65dbb6 upstream. If a watch is being added to a queue, it needs to guard against interference from addition of a new watch, manual removal of a watch and removal of a watch due to some other queue being destroyed. KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by holding the key->sem writelocked and by holding refs on both the key and the queue - but that doesn't prevent interaction from other {key,queue} pairs. While add_watch_to_object() does take the spinlock on the event queue, it doesn't take the lock on the source's watch list. The assumption was that the caller would prevent that (say by taking key->sem) - but that doesn't prevent interference from the destruction of another queue. Fix this by locking the watcher list in add_watch_to_object(). Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com Signed-off-by: David Howells cc: keyrings@vger.kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

watch_queue: Fix missing rcu annotation

2022-08-03T10:05:19Z

commit e0339f036ef4beb9b20f0b6532a1e0ece7f594c6 upstream. Since __post_watch_notification() walks wlist->watchers with only the RCU read lock held, we need to use RCU methods to add to the list (we already use RCU methods to remove from the list). Fix add_watch_to_object() to use hlist_add_head_rcu() instead of hlist_add_head() for that list. Fixes: c73be61cede5 ("pipe: Add general notification queue support") Signed-off-by: David Howells Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

watch-queue: remove spurious double semicolon

2022-07-29T15:28:17Z

commit 44e29e64cf1ac0cffb152e0532227ea6d002aa28 upstream. Sedat Dilek noticed that I had an extraneous semicolon at the end of a line in the previous patch. It's harmless, but unintentional, and while compilers just treat it as an extra empty statement, for all I know some other tooling might warn about it. So clean it up before other people notice too ;) Fixes: 353f7988dd84 ("watchqueue: make sure to serialize 'wqueue->defunct' properly") Reported-by: Sedat Dilek Signed-off-by: Linus Torvalds Reported-by: Sedat Dilek Signed-off-by: Greg Kroah-Hartman

watchqueue: make sure to serialize 'wqueue->defunct' properly

2022-07-29T15:28:17Z

commit 353f7988dd8413c47718f7ca79c030b6fb62cfe5 upstream. When the pipe is closed, we mark the associated watchqueue defunct by calling watch_queue_clear(). However, while that is protected by the watchqueue lock, new watchqueue entries aren't actually added under that lock at all: they use the pipe->rd_wait.lock instead, and looking up that pipe happens without any locking. The watchqueue code uses the RCU read-side section to make sure that the wqueue entry itself hasn't disappeared, but that does not protect the pipe_info in any way. So make sure to actually hold the wqueue lock when posting watch events, properly serializing against the pipe being torn down. Reported-by: Noam Rathaus Cc: Greg KH Cc: David Howells Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

sched/deadline: Fix BUG_ON condition for deboosted tasks

2022-07-29T15:28:14Z

commit ddfc710395cccc61247348df9eb18ea50321cbed upstream. Tasks the are being deboosted from SCHED_DEADLINE might enter enqueue_task_dl() one last time and hit an erroneous BUG_ON condition: since they are not boosted anymore, the if (is_dl_boosted()) branch is not taken, but the else if (!dl_prio) is and inside this one we BUG_ON(!is_dl_boosted), which is of course false (BUG_ON triggered) otherwise we had entered the if branch above. Long story short, the current condition doesn't make sense and always leads to triggering of a BUG. Fix this by only checking enqueue flags, properly: ENQUEUE_REPLENISH has to be present, but additional flags are not a problem. Fixes: 64be6f1f5f71 ("sched/deadline: Don't replenish from a !SCHED_DEADLINE entity") Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220714151908.533052-1-juri.lelli@redhat.com Signed-off-by: Greg Kroah-Hartman

bpf: Make sure mac_header was set before using it

2022-07-29T15:28:14Z

commit 0326195f523a549e0a9d7fd44c70b26fd7265090 upstream. Classic BPF has a way to load bytes starting from the mac header. Some skbs do not have a mac header, and skb_mac_header() in this case is returning a pointer that 65535 bytes after skb->head. Existing range check in bpf_internal_load_pointer_neg_helper() was properly kicking and no illegal access was happening. New sanity check in skb_mac_header() is firing, so we need to avoid it. WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 skb_mac_header include/linux/skbuff.h:2785 [inline] WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74 Modules linked in: CPU: 1 PID: 28990 Comm: syz-executor.0 Not tainted 5.19.0-rc4-syzkaller-00865-g4874fb9484be #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022 RIP: 0010:skb_mac_header include/linux/skbuff.h:2785 [inline] RIP: 0010:bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74 Code: ff ff 45 31 f6 e9 5a ff ff ff e8 aa 27 40 00 e9 3b ff ff ff e8 90 27 40 00 e9 df fe ff ff e8 86 27 40 00 eb 9e e8 2f 2c f3 ff <0f> 0b eb b1 e8 96 27 40 00 e9 79 fe ff ff 90 41 57 41 56 41 55 41 RSP: 0018:ffffc9000309f668 EFLAGS: 00010216 RAX: 0000000000000118 RBX: ffffffffffeff00c RCX: ffffc9000e417000 RDX: 0000000000040000 RSI: ffffffff81873f21 RDI: 0000000000000003 RBP: ffff8880842878c0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000001 R12: 0000000000000004 R13: ffff88803ac56c00 R14: 000000000000ffff R15: dffffc0000000000 FS: 00007f5c88a16700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdaa9f6c058 CR3: 000000003a82c000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ____bpf_skb_load_helper_32 net/core/filter.c:276 [inline] bpf_skb_load_helper_32+0x191/0x220 net/core/filter.c:264 Fixes: f9aefd6b2aa3 ("net: warn if mac header was not set") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20220707123900.945305-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman

perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()

2022-07-29T15:27:59Z

[ Upstream commit 68e3c69803dada336893640110cb87221bb01dcf ] Yang Jihing reported a race between perf_event_set_output() and perf_mmap_close(): CPU1 CPU2 perf_mmap_close(e2) if (atomic_dec_and_test(&e2->rb->mmap_count)) // 1 - > 0 detach_rest = true ioctl(e1, IOC_SET_OUTPUT, e2) perf_event_set_output(e1, e2) ... list_for_each_entry_rcu(e, &e2->rb->event_list, rb_entry) ring_buffer_attach(e, NULL); // e1 isn't yet added and // therefore not detached ring_buffer_attach(e1, e2->rb) list_add_rcu(&e1->rb_entry, &e2->rb->event_list) After this; e1 is attached to an unmapped rb and a subsequent perf_mmap() will loop forever more: again: mutex_lock(&e->mmap_mutex); if (event->rb) { ... if (!atomic_inc_not_zero(&e->rb->mmap_count)) { ... mutex_unlock(&e->mmap_mutex); goto again; } } The loop in perf_mmap_close() holds e2->mmap_mutex, while the attach in perf_event_set_output() holds e1->mmap_mutex. As such there is no serialization to avoid this race. Change perf_event_set_output() to take both e1->mmap_mutex and e2->mmap_mutex to alleviate that problem. Additionally, have the loop in perf_mmap() detach the rb directly, this avoids having to wait for the concurrent perf_mmap_close() to get around to doing it to make progress. Fixes: 9bb5d40cd93c ("perf: Fix mmap() accounting hole") Reported-by: Yang Jihong Signed-off-by: Peter Zijlstra (Intel) Tested-by: Yang Jihong Link: https://lkml.kernel.org/r/YsQ3jm2GR38SW7uD@worktop.programming.kicks-ass.net Signed-off-by: Sasha Levin

signal handling: don't use BUG_ON() for debugging

2022-07-22T08:21:56Z

[ Upstream commit a382f8fee42ca10c9bfce0d2352d4153f931f5dc ] These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason. It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue". Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing). Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin