user/sven/linux.git/kernel, branch v5.4.118

tracing: Restructure trace_clock_global() to never block

2021-05-11T12:04:18Z

commit aafe104aa9096827a429bc1358f8260ee565b7cc upstream. It was reported that a fix to the ring buffer recursion detection would cause a hung machine when performing suspend / resume testing. The following backtrace was extracted from debugging that case: Call Trace: trace_clock_global+0x91/0xa0 __rb_reserve_next+0x237/0x460 ring_buffer_lock_reserve+0x12a/0x3f0 trace_buffer_lock_reserve+0x10/0x50 __trace_graph_return+0x1f/0x80 trace_graph_return+0xb7/0xf0 ? trace_clock_global+0x91/0xa0 ftrace_return_to_handler+0x8b/0xf0 ? pv_hash+0xa0/0xa0 return_to_handler+0x15/0x30 ? ftrace_graph_caller+0xa0/0xa0 ? trace_clock_global+0x91/0xa0 ? __rb_reserve_next+0x237/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 ? trace_event_buffer_lock_reserve+0x3c/0x120 ? trace_event_buffer_reserve+0x6b/0xc0 ? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0 ? dpm_run_callback+0x3b/0xc0 ? pm_ops_is_empty+0x50/0x50 ? platform_get_irq_byname_optional+0x90/0x90 ? trace_device_pm_callback_start+0x82/0xd0 ? dpm_run_callback+0x49/0xc0 With the following RIP: RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200 Since the fix to the recursion detection would allow a single recursion to happen while tracing, this lead to the trace_clock_global() taking a spin lock and then trying to take it again: ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* lock taken */ (something else gets traced by function graph tracer) ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* DEAD LOCK! */ Tracing should *never* block, as it can lead to strange lockups like the above. Restructure the trace_clock_global() code to instead of simply taking a lock to update the recorded "prev_time" simply use it, as two events happening on two different CPUs that calls this at the same time, really doesn't matter which one goes first. Use a trylock to grab the lock for updating the prev_time, and if it fails, simply try again the next time. If it failed to be taken, that means something else is already updating it. Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home Cc: stable@vger.kernel.org Tested-by: Konstantin Kharlamov Tested-by: Todd Brandt Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761 Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing: Map all PIDs to command lines

2021-05-11T12:04:18Z

commit 785e3c0a3a870e72dc530856136ab4c8dd207128 upstream. The default max PID is set by PID_MAX_DEFAULT, and the tracing infrastructure uses this number to map PIDs to the comm names of the tasks, such output of the trace can show names from the recorded PIDs in the ring buffer. This mapping is also exported to user space via the "saved_cmdlines" file in the tracefs directory. But currently the mapping expects the PIDs to be less than PID_MAX_DEFAULT, which is the default maximum and not the real maximum. Recently, systemd will increases the maximum value of a PID on the system, and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its comm is not recorded. This leads to the entire trace to have "<...>" as the comm name, which is pretty useless. Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead of just mapping the index to the comm, map a mask of the PID (PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the map_cmdline_to_pid array (that already exists). This bug goes back to the beginning of ftrace, but hasn't been an issue until user space started increasing the maximum value of PIDs. Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home Cc: stable@vger.kernel.org Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

kbuild: update config_data.gz only when the content of .config is changed

2021-05-11T12:04:16Z

commit 46b41d5dd8019b264717978c39c43313a524d033 upstream. If the timestamp of the .config file is updated, config_data.gz is regenerated, then vmlinux is re-linked. This occurs even if the content of the .config has not changed at all. This issue was mitigated by commit 67424f61f813 ("kconfig: do not write .config if the content is the same"); Kconfig does not update the .config when it ends up with the identical configuration. The issue is remaining when the .config is created by *_defconfig with some config fragment(s) applied on top. This is typical for powerpc and mips, where several *_defconfig targets are constructed by using merge_config.sh. One workaround is to have the copy of the .config. The filechk rule updates the copy, kernel/config_data, by checking the content instead of the timestamp. With this commit, the second run with the same configuration avoids the needless rebuilds. $ make ARCH=mips defconfig all [ snip ] $ make ARCH=mips defconfig all *** Default configuration is based on target '32r2el_defconfig' Using ./arch/mips/configs/generic_defconfig as base Merging arch/mips/configs/generic/32r2.config Merging arch/mips/configs/generic/el.config Merging ./arch/mips/configs/generic/board-boston.config Merging ./arch/mips/configs/generic/board-ni169445.config Merging ./arch/mips/configs/generic/board-ocelot.config Merging ./arch/mips/configs/generic/board-ranchu.config Merging ./arch/mips/configs/generic/board-sead-3.config Merging ./arch/mips/configs/generic/board-xilfpga.config # # configuration written to .config # SYNC include/config/auto.conf CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h CHK include/generated/autoksyms.h Reported-by: Elliot Berman Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

Revert 337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")

2021-05-11T12:04:16Z

commit 4fbf5d6837bf81fd7a27d771358f4ee6c4f243f8 upstream. The FUTEX_WAIT operand has historically a relative timeout which means that the clock id is irrelevant as relative timeouts on CLOCK_REALTIME are not subject to wall clock changes and therefore are mapped by the kernel to CLOCK_MONOTONIC for simplicity. If a caller would set FUTEX_CLOCK_REALTIME for FUTEX_WAIT the timeout is still treated relative vs. CLOCK_MONOTONIC and then the wait arms that timeout based on CLOCK_REALTIME which is broken and obviously has never been used or even tested. Reject any attempt to use FUTEX_CLOCK_REALTIME with FUTEX_WAIT again. The desired functionality can be achieved with FUTEX_WAIT_BITSET and a FUTEX_BITSET_MATCH_ANY argument. Fixes: 337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op") Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210422194704.834797921@linutronix.de Signed-off-by: Greg Kroah-Hartman

sched/fair: Ignore percpu threads for imbalance pulls

2021-05-11T12:04:11Z

[ Upstream commit 9bcb959d05eeb564dfc9cac13a59843a4fb2edf2 ] During load balance, LBF_SOME_PINNED will be set if any candidate task cannot be detached due to CPU affinity constraints. This can result in setting env->sd->parent->sgc->group_imbalance, which can lead to a group being classified as group_imbalanced (rather than any of the other, lower group_type) when balancing at a higher level. In workloads involving a single task per CPU, LBF_SOME_PINNED can often be set due to per-CPU kthreads being the only other runnable tasks on any given rq. This results in changing the group classification during load-balance at higher levels when in reality there is nothing that can be done for this affinity constraint: per-CPU kthreads, as the name implies, don't get to move around (modulo hotplug shenanigans). It's not as clear for userspace tasks - a task could be in an N-CPU cpuset with N-1 offline CPUs, making it an "accidental" per-CPU task rather than an intended one. KTHREAD_IS_PER_CPU gives us an indisputable signal which we can leverage here to not set LBF_SOME_PINNED. Note that the aforementioned classification to group_imbalance (when nothing can be done) is especially problematic on big.LITTLE systems, which have a topology the likes of: DIE [ ] MC [ ][ ] 0 1 2 3 L L B B arch_scale_cpu_capacity(L) < arch_scale_cpu_capacity(B) Here, setting LBF_SOME_PINNED due to a per-CPU kthread when balancing at MC level on CPUs [0-1] will subsequently prevent CPUs [2-3] from classifying the [0-1] group as group_misfit_task when balancing at DIE level. Thus, if CPUs [0-1] are running CPU-bound (misfit) tasks, ill-timed per-CPU kthreads can significantly delay the upgmigration of said misfit tasks. Systems relying on ASYM_PACKING are likely to face similar issues. Signed-off-by: Lingutla Chandrasekhar [Use kthread_is_per_cpu() rather than p->nr_cpus_allowed] [Reword changelog] Signed-off-by: Valentin Schneider Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Dietmar Eggemann Reviewed-by: Vincent Guittot Link: https://lkml.kernel.org/r/20210407220628.3798191-2-valentin.schneider@arm.com Signed-off-by: Sasha Levin

genirq/matrix: Prevent allocation counter corruption

2021-05-11T12:04:05Z

[ Upstream commit c93a5e20c3c2dabef8ea360a3d3f18c6f68233ab ] When irq_matrix_free() is called for an unallocated vector the managed_allocated and total_allocated counters get out of sync with the real state of the matrix. Later, when the last interrupt is freed, these counters will underflow resulting in UINTMAX because the counters are unsigned. While this is certainly a problem of the calling code, this can be catched in the allocator by checking the allocation bit for the to be freed vector which simplifies debugging. An example of the problem described above: https://lore.kernel.org/lkml/20210318192819.636943062@linutronix.de/ Add the missing sanity check and emit a warning when it triggers. Suggested-by: Thomas Gleixner Signed-off-by: Vitaly Kuznetsov Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210319111823.1105248-1-vkuznets@redhat.com Signed-off-by: Sasha Levin

posix-timers: Preserve return value in clock_adjtime32()

2021-05-11T12:04:04Z

commit 2d036dfa5f10df9782f5278fc591d79d283c1fad upstream. The return value on success (>= 0) is overwritten by the return value of put_old_timex32(). That works correct in the fault case, but is wrong for the success case where put_old_timex32() returns 0. Just check the return value of put_old_timex32() and return -EFAULT in case it is not zero. [ tglx: Massage changelog ] Fixes: 3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to native counterparts") Signed-off-by: Chen Jun Signed-off-by: Thomas Gleixner Reviewed-by: Richard Cochran Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210414030449.90692-1-chenjun102@huawei.com Signed-off-by: Greg Kroah-Hartman

modules: inherit TAINT_PROPRIETARY_MODULE

2021-05-11T12:04:04Z

commit 262e6ae7081df304fc625cf368d5c2cbba2bb991 upstream. If a TAINT_PROPRIETARY_MODULE exports symbol, inherit the taint flag for all modules importing these symbols, and don't allow loading symbols from TAINT_PROPRIETARY_MODULE modules if the module previously imported gplonly symbols. Add a anti-circumvention devices so people don't accidentally get themselves into trouble this way. Comment from Greg: "Ah, the proven-to-be-illegal "GPL Condom" defense :)" [jeyu: pr_info -> pr_err and pr_warn as per discussion] Link: http://lore.kernel.org/r/20200730162957.GA22469@lst.de Acked-by: Daniel Vetter Reviewed-by: Greg Kroah-Hartman Signed-off-by: Christoph Hellwig Signed-off-by: Jessica Yu Signed-off-by: Greg Kroah-Hartman

modules: return licensing information from find_symbol

2021-05-11T12:04:04Z

commit ef1dac6021cc8ec5de02ce31722bf26ac4ed5523 upstream. Report the GPLONLY status through a new argument. Signed-off-by: Christoph Hellwig Signed-off-by: Jessica Yu Signed-off-by: Greg Kroah-Hartman

modules: rename the licence field in struct symsearch to license

2021-05-11T12:04:04Z

commit cd8732cdcc37d7077c4fa2c966b748c0662b607e upstream. Use the same spelling variant as the rest of the file. Signed-off-by: Christoph Hellwig Signed-off-by: Jessica Yu Signed-off-by: Greg Kroah-Hartman