user/sven/linux.git/kernel, branch v5.4.298

ftrace: Fix potential warning in trace_printk_seq during ftrace_dump

2025-09-04T12:05:53Z

[ Upstream commit 4013aef2ced9b756a410f50d12df9ebe6a883e4a ] When calling ftrace_dump_one() concurrently with reading trace_pipe, a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race condition. The issue occurs because: CPU0 (ftrace_dump) CPU1 (reader) echo z > /proc/sysrq-trigger !trace_empty(&iter) trace_iterator_reset(&iter) <- len = size = 0 cat /sys/kernel/tracing/trace_pipe trace_find_next_entry_inc(&iter) __find_next_entry ring_buffer_empty_cpu <- all empty return NULL trace_printk_seq(&iter.seq) WARN_ON_ONCE(s->seq.len >= s->seq.size) In the context between trace_empty() and trace_find_next_entry_inc() during ftrace_dump, the ring buffer data was consumed by other readers. This caused trace_find_next_entry_inc to return NULL, failing to populate `iter.seq`. At this point, due to the prior trace_iterator_reset, both `iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal, the WARN_ON_ONCE condition is triggered. Move the trace_printk_seq() into the if block that checks to make sure the return value of trace_find_next_entry_inc() is non-NULL in ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before subsequent operations. Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Ingo Molnar Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com Fixes: d769041f8653 ("ring_buffer: implement new locking") Signed-off-by: Tengda Wu Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin

mm: drop the assumption that VM_SHARED always implies writable

2025-08-28T14:21:36Z

[ Upstream commit e8e17ee90eaf650c855adb0a3e5e965fd6692ff1 ] Patch series "permit write-sealed memfd read-only shared mappings", v4. The man page for fcntl() describing memfd file seals states the following about F_SEAL_WRITE:- Furthermore, trying to create new shared, writable memory-mappings via mmap(2) will also fail with EPERM. With emphasis on 'writable'. In turns out in fact that currently the kernel simply disallows all new shared memory mappings for a memfd with F_SEAL_WRITE applied, rendering this documentation inaccurate. This matters because users are therefore unable to obtain a shared mapping to a memfd after write sealing altogether, which limits their usefulness. This was reported in the discussion thread [1] originating from a bug report [2]. This is a product of both using the struct address_space->i_mmap_writable atomic counter to determine whether writing may be permitted, and the kernel adjusting this counter when any VM_SHARED mapping is performed and more generally implicitly assuming VM_SHARED implies writable. It seems sensible that we should only update this mapping if VM_MAYWRITE is specified, i.e. whether it is possible that this mapping could at any point be written to. If we do so then all we need to do to permit write seals to function as documented is to clear VM_MAYWRITE when mapping read-only. It turns out this functionality already exists for F_SEAL_FUTURE_WRITE - we can therefore simply adapt this logic to do the same for F_SEAL_WRITE. We then hit a chicken and egg situation in mmap_region() where the check for VM_MAYWRITE occurs before we are able to clear this flag. To work around this, perform this check after we invoke call_mmap(), with careful consideration of error paths. Thanks to Andy Lutomirski for the suggestion! [1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/ [2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238 This patch (of 3): There is a general assumption that VMAs with the VM_SHARED flag set are writable. If the VM_MAYWRITE flag is not set, then this is simply not the case. Update those checks which affect the struct address_space->i_mmap_writable field to explicitly test for this by introducing [vma_]is_shared_maywrite() helper functions. This remains entirely conservative, as the lack of VM_MAYWRITE guarantees that the VMA cannot be written to. Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes Suggested-by: Andy Lutomirski Reviewed-by: Jan Kara Cc: Alexander Viro Cc: Christian Brauner Cc: Hugh Dickins Cc: Matthew Wilcox (Oracle) Cc: Mike Kravetz Cc: Muchun Song Signed-off-by: Andrew Morton Cc: stable@vger.kernel.org Signed-off-by: Isaac J. Manjarres Signed-off-by: Greg Kroah-Hartman

tracing: Add down_write(trace_event_sem) when adding trace event

2025-08-28T14:21:34Z

[ Upstream commit b5e8acc14dcb314a9b61ff19dcd9fdd0d88f70df ] When a module is loaded, it adds trace events defined by the module. It may also need to modify the modules trace printk formats to replace enum names with their values. If two modules are loaded at the same time, the adding of the event to the ftrace_events list can corrupt the walking of the list in the code that is modifying the printk format strings and crash the kernel. The addition of the event should take the trace_event_sem for write while it adds the new event. Also add a lockdep_assert_held() on that semaphore in __trace_add_event_dirs() as it iterates the list. Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers Acked-by: Masami Hiramatsu (Google) Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home Reported-by: Fusheng Huang(黄富生) Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/ Fixes: 110bf2b764eb6 ("tracing: add protection around module events unload") Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ftrace: Also allocate and copy hash for reading of filter files

2025-08-28T14:21:32Z

commit bfb336cf97df7b37b2b2edec0f69773e06d11955 upstream. Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds the pointer to the global tracer hash to its iterator. Unlike the writer that allocates a copy of the hash, the reader keeps the pointer to the filter hashes. This is problematic because this pointer is static across function calls that release the locks that can update the global tracer hashes. This can cause UAF and similar bugs. Allocate and copy the hash for reading the filter files like it is done for the writers. This not only fixes UAF bugs, but also makes the code a bit simpler as it doesn't have to differentiate when to free the iterator's hash between writers and readers. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Nathan Chancellor Cc: Linus Torvalds Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home Fixes: c20489dad156 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read") Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/ Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/ Reported-by: Tengda Wu Tested-by: Tengda Wu Tested-by: Nathan Chancellor Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

rcu: Protect ->defer_qs_iw_pending from data race

2025-08-28T14:21:26Z

[ Upstream commit 90c09d57caeca94e6f3f87c49e96a91edd40cbfd ] On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is invoked within an interrupts-disabled region of code [1], it will invoke rcu_read_unlock_special(), which uses an irq-work handler to force the system to notice when the RCU read-side critical section actually ends. That end won't happen until interrupts are enabled at the soonest. In some kernels, such as those booted with rcutree.use_softirq=y, the irq-work handler is used unconditionally. The per-CPU rcu_data structure's ->defer_qs_iw_pending field is updated by the irq-work handler and is both read and updated by rcu_read_unlock_special(). This resulted in the following KCSAN splat: ------------------------------------------------------------------------ BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8: rcu_read_unlock_special+0x175/0x260 __rcu_read_unlock+0x92/0xa0 rt_spin_unlock+0x9b/0xc0 __local_bh_enable+0x10d/0x170 __local_bh_enable_ip+0xfb/0x150 rcu_do_batch+0x595/0xc40 rcu_cpu_kthread+0x4e9/0x830 smpboot_thread_fn+0x24d/0x3b0 kthread+0x3bd/0x410 ret_from_fork+0x35/0x40 ret_from_fork_asm+0x1a/0x30 write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8: rcu_preempt_deferred_qs_handler+0x1e/0x30 irq_work_single+0xaf/0x160 run_irq_workd+0x91/0xc0 smpboot_thread_fn+0x24d/0x3b0 kthread+0x3bd/0x410 ret_from_fork+0x35/0x40 ret_from_fork_asm+0x1a/0x30 no locks held by irq_work/8/88. irq event stamp: 200272 hardirqs last enabled at (200272): [] finish_task_switch+0x131/0x320 hardirqs last disabled at (200271): [] __schedule+0x129/0xd70 softirqs last enabled at (0): [] copy_process+0x4df/0x1cc0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ------------------------------------------------------------------------ The problem is that irq-work handlers run with interrupts enabled, which means that rcu_preempt_deferred_qs_handler() could be interrupted, and that interrupt handler might contain an RCU read-side critical section, which might invoke rcu_read_unlock_special(). In the strict KCSAN mode of operation used by RCU, this constitutes a data race on the ->defer_qs_iw_pending field. This commit therefore disables interrupts across the portion of the rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending field. This suffices because this handler is not a fast path. Signed-off-by: Paul E. McKenney Reviewed-by: Frederic Weisbecker Signed-off-by: Neeraj Upadhyay (AMD) Signed-off-by: Sasha Levin

PM: sleep: console: Fix the black screen issue

2025-08-28T14:21:25Z

[ Upstream commit 4266e8fa56d3d982bf451d382a410b9db432015c ] When the computer enters sleep status without a monitor connected, the system switches the console to the virtual terminal tty63(SUSPEND_CONSOLE). If a monitor is subsequently connected before waking up, the system skips the required VT restoration process during wake-up, leaving the console on tty63 instead of switching back to tty1. To fix this issue, a global flag vt_switch_done is introduced to record whether the system has successfully switched to the suspend console via vt_move_to_console() during suspend. If the switch was completed, vt_switch_done is set to 1. Later during resume, this flag is checked to ensure that the original console is restored properly by calling vt_move_to_console(orig_fgconsole, 0). This prevents scenarios where the resume logic skips console restoration due to incorrect detection of the console state, especially when a monitor is reconnected before waking up. Signed-off-by: tuhaowen Link: https://patch.msgid.link/20250611032345.29962-1-tuhaowen@uniontech.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

perf/core: Prevent VMA split of buffer mappings

2025-08-28T14:21:23Z

commit b024d7b56c77191cde544f838debb7f8451cd0d6 upstream. The perf mmap code is careful about mmap()'ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping. Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner Reviewed-by: Lorenzo Stoakes Acked-by: Arnaldo Carvalho de Melo Acked-by: Vlastimil Babka Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

perf/core: Exit early on perf_mmap() fail

2025-08-28T14:21:23Z

commit 07091aade394f690e7b655578140ef84d0e8d7b0 upstream. When perf_mmap() fails to allocate a buffer, it still invokes the event_mapped() callback of the related event. On X86 this might increase the perf_rdpmc_allowed reference counter. But nothing undoes this as perf_mmap_close() is never called in this case, which causes another reference count leak. Return early on failure to prevent that. Fixes: 1e0fb9ec679c ("perf/core: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner Reviewed-by: Lorenzo Stoakes Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

perf/core: Don't leak AUX buffer refcount on allocation failure

2025-08-28T14:21:22Z

commit 5468c0fbccbb9d156522c50832244a8b722374fb upstream. Failure of the AUX buffer allocation leaks the reference count. Set the reference count to 1 only when the allocation succeeds. Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner Reviewed-by: Lorenzo Stoakes Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

perf: Fix sample vs do_exit()

2025-06-27T10:02:58Z

[ Upstream commit 4f6fc782128355931527cefe3eb45338abd8ab39 ] Baisheng Gao reported an ARM64 crash, which Mark decoded as being a synchronous external abort -- most likely due to trying to access MMIO in bad ways. The crash further shows perf trying to do a user stack sample while in exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address space it is trying to access. It turns out that we stop perf after we tear down the userspace mm; a receipie for disaster, since perf likes to access userspace for various reasons. Flip this order by moving up where we stop perf in do_exit(). Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER to abort when the current task does not have an mm (exit_mm() makes sure to set current->mm = NULL; before commencing with the actual teardown). Such that CPU wide events don't trip on this same problem. Fixes: c5ebcedb566e ("perf: Add ability to attach user stack dump to sample") Reported-by: Baisheng Gao Suggested-by: Mark Rutland Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20250605110815.GQ39944@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin