user/sven/linux.git/kernel, branch v5.9.8

perf/core: Fix a memory leak in perf_event_parse_addr_filter()

2020-11-10T11:39:11Z

commit 7bdb157cdebbf95a1cd94ed2e01b338714075d00 upstream. As shown through runtime testing, the "filename" allocation is not always freed in perf_event_parse_addr_filter(). There are three possible ways that this could happen: - It could be allocated twice on subsequent iterations through the loop, - or leaked on the success path, - or on the failure path. Clean up the code flow to make it obvious that 'filename' is always freed in the reallocation path and in the two return paths as well. We rely on the fact that kfree(NULL) is NOP and filename is initialized with NULL. This fixes the leak. No other side effects expected. [ Dan Carpenter: cleaned up the code flow & added a changelog. ] [ Ingo Molnar: updated the changelog some more. ] Fixes: 375637bc5249 ("perf/core: Introduce address range filtering") Signed-off-by: "kiyin(尹亮)" Signed-off-by: Dan Carpenter Signed-off-by: Ingo Molnar Cc: "Srivatsa S. Bhat" Cc: Anthony Liguori -- kernel/events/core.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) Signed-off-by: Greg Kroah-Hartman

entry: Fix the incorrect ordering of lockdep and RCU check

2020-11-10T11:39:08Z

commit 9d820f68b2bdba5b2e7bf135123c3f57c5051d05 upstream. When an exception/interrupt hits kernel space and the kernel is not currently in the idle task then RCU must be watching. irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in turn invokes lockdep when taking a lock. But at that point lockdep does not yet know about the fact that interrupts have been disabled by the CPU, which triggers a lockdep splat complaining about inconsistent state. Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU. So use the same sequence as for the idle case and tell lockdep about the irq state change first, invoke the RCU check and then do the lockdep and tracer update. Fixes: a5497bab5f72 ("entry: Provide generic interrupt entry/exit code") Reported-by: Mark Rutland Signed-off-by: Thomas Gleixner Tested-by: Mark Rutland Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87y2jhl19s.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

fork: fix copy_process(CLONE_PARENT) race with the exiting ->real_parent

2020-11-10T11:39:08Z

commit b4e00444cab4c3f3fec876dc0cccc8cbb0d1a948 upstream. current->group_leader->exit_signal may change during copy_process() if current->real_parent exits. Move the assignment inside tasklist_lock to avoid the race. Signed-off-by: Eddy Wu Acked-by: Oleg Nesterov Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

futex: Handle transient "ownerless" rtmutex state correctly

2020-11-10T11:39:02Z

commit 9f5d1c336a10c0d24e83e40b4c1b9539f7dba627 upstream. Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner(). This is one possible chain of events leading to this: Task Prio Operation T1 120 lock(F) T2 120 lock(F) -> blocks (top waiter) T3 50 (RT) lock(F) -> boosts T1 and blocks (new top waiter) XX timeout/ -> wakes T2 signal T1 50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set) T2 120 cleanup -> try_to_take_mutex() fails because T3 is the top waiter and the lower priority T2 cannot steal the lock. -> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON() The comment states that this is invalid and rt_mutex_real_owner() must return a non NULL owner when the trylock failed, but in case of a queued and woken up waiter rt_mutex_real_owner() == NULL is a valid transient state. The higher priority waiter has simply not yet managed to take over the rtmutex. The BUG_ON() is therefore wrong and this is just another retry condition in fixup_pi_state_owner(). Drop the locks, so that T3 can make progress, and then try the fixup again. Gratian provided a great analysis, traces and a reproducer. The analysis is to the point, but it confused the hell out of that tglx dude who had to page in all the futex horrors again. Condensed version is above. [ tglx: Wrote comment and changelog ] Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex") Reported-by: Gratian Crisan Signed-off-by: Mike Galbraith Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

tracing: Fix out of bounds write in get_trace_buf

2020-11-10T11:39:02Z

commit c1acb4ac1a892cf08d27efcb964ad281728b0545 upstream. The nesting count of trace_printk allows for 4 levels of nesting. The nesting counter starts at zero and is incremented before being used to retrieve the current context's buffer. But the index to the buffer uses the nesting counter after it was incremented, and not its original number, which in needs to do. Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com Cc: stable@vger.kernel.org Fixes: 3d9622c12c887 ("tracing: Add barrier to trace_printk() buffer nesting modification") Signed-off-by: Qiujun Huang Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

ftrace: Handle tracing when switching between context

2020-11-10T11:39:02Z

commit 726b3d3f141fba6f841d715fc4d8a4a84f02c02a upstream. When an interrupt or NMI comes in and switches the context, there's a delay from when the preempt_count() shows the update. As the preempt_count() is used to detect recursion having each context have its own bit get set when tracing starts, and if that bit is already set, it is considered a recursion and the function exits. But if this happens in that section where context has changed but preempt_count() has not been updated, this will be incorrectly flagged as a recursion. To handle this case, create another bit call TRANSITION and test it if the current context bit is already set. Flag the call as a recursion if the TRANSITION bit is already set, and if not, set it and continue. The TRANSITION bit will be cleared normally on the return of the function that set it, or if the current context bit is clear, set it and clear the TRANSITION bit to allow for another transition between the current context and an even higher one. Cc: stable@vger.kernel.org Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

ftrace: Fix recursion check for NMI test

2020-11-10T11:39:02Z

commit ee11b93f95eabdf8198edd4668bf9102e7248270 upstream. The code that checks recursion will work to only do the recursion check once if there's nested checks. The top one will do the check, the other nested checks will see recursion was already checked and return zero for its "bit". On the return side, nothing will be done if the "bit" is zero. The problem is that zero is returned for the "good" bit when in NMI context. This will set the bit for NMIs making it look like *all* NMI tracing is recursing, and prevent tracing of anything in NMI context! The simple fix is to return "bit + 1" and subtract that bit on the end to get the real bit. Cc: stable@vger.kernel.org Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

ring-buffer: Fix recursion protection transitions between interrupt context

2020-11-10T11:39:01Z

commit b02414c8f045ab3b9afc816c3735bc98c5c3d262 upstream. The recursion protection of the ring buffer depends on preempt_count() to be correct. But it is possible that the ring buffer gets called after an interrupt comes in but before it updates the preempt_count(). This will trigger a false positive in the recursion code. Use the same trick from the ftrace function callback recursion code which uses a "transition" bit that gets set, to allow for a single recursion for to handle transitions between contexts. Cc: stable@vger.kernel.org Fixes: 567cd4da54ff4 ("ring-buffer: User context bit recursion checking") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

kthread_worker: prevent queuing delayed work from timer_fn when it is being canceled

2020-11-10T11:39:00Z

commit 6993d0fdbee0eb38bfac350aa016f65ad11ed3b1 upstream. There is a small race window when a delayed work is being canceled and the work still might be queued from the timer_fn: CPU0 CPU1 kthread_cancel_delayed_work_sync() __kthread_cancel_work_sync() __kthread_cancel_work() work->canceling++; kthread_delayed_work_timer_fn() kthread_insert_work(); BUG: kthread_insert_work() should not get called when work->canceling is set. Signed-off-by: Zqiang Signed-off-by: Andrew Morton Reviewed-by: Petr Mladek Acked-by: Tejun Heo Cc: Link: https://lkml.kernel.org/r/20201014083030.16895-1-qiang.zhang@windriver.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ptrace: fix task_join_group_stop() for the case when current is traced

2020-11-10T11:38:56Z

commit 7b3c36fc4c231ca532120bbc0df67a12f09c1d96 upstream. This testcase #include #include #include #include #include #include #include void *tf(void *arg) { return NULL; } int main(void) { int pid = fork(); if (!pid) { kill(getpid(), SIGSTOP); pthread_t th; pthread_create(&th, NULL, tf, NULL); return 0; } waitpid(pid, NULL, WSTOPPED); ptrace(PTRACE_SEIZE, pid, 0, PTRACE_O_TRACECLONE); waitpid(pid, NULL, 0); ptrace(PTRACE_CONT, pid, 0,0); waitpid(pid, NULL, 0); int status; int thread = waitpid(-1, &status, 0); assert(thread > 0 && thread != pid); assert(status == 0x80137f); return 0; } fails and triggers WARN_ON_ONCE(!signr) in do_jobctl_trap(). This is because task_join_group_stop() has 2 problems when current is traced: 1. We can't rely on the "JOBCTL_STOP_PENDING" check, a stopped tracee can be woken up by debugger and it can clone another thread which should join the group-stop. We need to check group_stop_count || SIGNAL_STOP_STOPPED. 2. If SIGNAL_STOP_STOPPED is already set, we should not increment sig->group_stop_count and add JOBCTL_STOP_CONSUME. The new thread should stop without another do_notify_parent_cldstop() report. To clarify, the problem is very old and we should blame ptrace_init_task(). But now that we have task_join_group_stop() it makes more sense to fix this helper to avoid the code duplication. Reported-by: syzbot+3485e3773f7da290eecc@syzkaller.appspotmail.com Signed-off-by: Oleg Nesterov Signed-off-by: Andrew Morton Cc: Jens Axboe Cc: Christian Brauner Cc: "Eric W . Biederman" Cc: Zhiqiang Liu Cc: Tejun Heo Cc: Link: https://lkml.kernel.org/r/20201019134237.GA18810@redhat.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman