user/sven/linux.git/kernel, branch v6.1.112

bpf: Silence a warning in btf_type_id_size()

2024-09-12T09:10:29Z

commit e6c2f594ed961273479505b42040782820190305 upstream. syzbot reported a warning in [1] with the following stacktrace: WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... Call Trace: map_check_btf kernel/bpf/syscall.c:1024 [inline] map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198 __sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040 __do_sys_bpf kernel/bpf/syscall.c:5162 [inline] __se_sys_bpf kernel/bpf/syscall.c:5160 [inline] __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With the following btf [1] DECL_TAG 'a' type_id=4 component_idx=-1 [2] PTR '(anon)' type_id=0 [3] TYPE_TAG 'a' type_id=2 [4] VAR 'a' type_id=3, linkage=static and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG), the following WARN_ON_ONCE in btf_type_id_size() is triggered: if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) && !btf_type_is_var(size_type))) return NULL; Note that 'return NULL' is the correct behavior as we don't want a DECL_TAG type to be used as a btf_{key,value}_type_id even for the case like 'DECL_TAG -> STRUCT'. So there is no correctness issue here, we just want to silence warning. To silence the warning, I added DECL_TAG as one of kinds in btf_type_nosize() which will cause btf_type_id_size() returning NULL earlier without the warning. [1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ Reported-by: syzbot+958967f249155967d42a@syzkaller.appspotmail.com Signed-off-by: Yonghong Song Link: https://lore.kernel.org/r/20230530205029.264910-1-yhs@fb.com Signed-off-by: Martin KaFai Lau Signed-off-by: Diogo Jahchan Koike Signed-off-by: Greg Kroah-Hartman

workqueue: Improve scalability of workqueue watchdog touch

2024-09-12T09:10:27Z

[ Upstream commit 98f887f820c993e05a12e8aa816c80b8661d4c87 ] On a ~2000 CPU powerpc system, hard lockups have been observed in the workqueue code when stop_machine runs (in this case due to CPU hotplug). This is due to lots of CPUs spinning in multi_cpu_stop, calling touch_nmi_watchdog() which ends up calling wq_watchdog_touch(). wq_watchdog_touch() writes to the global variable wq_watchdog_touched, and that can find itself in the same cacheline as other important workqueue data, which slows down operations to the point of lockups. In the case of the following abridged trace, worker_pool_idr was in the hot line, causing the lockups to always appear at idr_find. watchdog: CPU 1125 self-detected hard LOCKUP @ idr_find Call Trace: get_work_pool __queue_work call_timer_fn run_timer_softirq __do_softirq do_softirq_own_stack irq_exit timer_interrupt decrementer_common_virt * interrupt: 900 (timer) at multi_cpu_stop multi_cpu_stop cpu_stopper_thread smpboot_thread_fn kthread Fix this by having wq_watchdog_touch() only write to the line if the last time a touch was recorded exceeds 1/4 of the watchdog threshold. Reported-by: Srikar Dronamraju Signed-off-by: Nicholas Piggin Reviewed-by: Paul E. McKenney Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

workqueue: wq_watchdog_touch is always called with valid CPU

2024-09-12T09:10:27Z

[ Upstream commit 18e24deb1cc92f2068ce7434a94233741fbd7771 ] Warn in the case it is called with cpu == -1. This does not appear to happen anywhere. Signed-off-by: Nicholas Piggin Reviewed-by: Paul E. McKenney Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

perf/aux: Fix AUX buffer serialization

2024-09-12T09:10:27Z

commit 2ab9d830262c132ab5db2f571003d80850d56b2a upstream. Ole reported that event->mmap_mutex is strictly insufficient to serialize the AUX buffer, add a per RB mutex to fully serialize it. Note that in the lock order comment the perf_event::mmap_mutex order was already wrong, that is, it nesting under mmap_lock is not new with this patch. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Reported-by: Ole Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

uprobes: Use kzalloc to allocate xol area

2024-09-12T09:10:27Z

commit e240b0fde52f33670d1336697c22d90a4fe33c84 upstream. To prevent unitialized members, use kzalloc to allocate the xol area. Fixes: b059a453b1cf1 ("x86/vdso: Add mremap hook to vm_special_mapping") Signed-off-by: Sven Schnelle Signed-off-by: Peter Zijlstra (Intel) Acked-by: Oleg Nesterov Link: https://lore.kernel.org/r/20240903102313.3402529-1-svens@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

smp: Add missing destroy_work_on_stack() call in smp_call_on_cpu()

2024-09-12T09:10:24Z

[ Upstream commit 77aeb1b685f9db73d276bad4bb30d48505a6fd23 ] For CONFIG_DEBUG_OBJECTS_WORK=y kernels sscs.work defined by INIT_WORK_ONSTACK() is initialized by debug_object_init_on_stack() for the debug check in __init_work() to work correctly. But this lacks the counterpart to remove the tracked object from debug objects again, which will cause a debug object warning once the stack is freed. Add the missing destroy_work_on_stack() invocation to cure that. [ tglx: Massaged changelog ] Signed-off-by: Zqiang Signed-off-by: Thomas Gleixner Tested-by: Paul E. McKenney Link: https://lore.kernel.org/r/20240704065213.13559-1-qiang.zhang1211@gmail.com Signed-off-by: Sasha Levin

dma-mapping: benchmark: Don't starve others when doing the test

2024-09-12T09:10:23Z

[ Upstream commit 54624acf8843375a6de3717ac18df3b5104c39c5 ] The test thread will start N benchmark kthreads and then schedule out until the test time finished and notify the benchmark kthreads to stop. The benchmark kthreads will keep running until notified to stop. There's a problem with current implementation when the benchmark kthreads number is equal to the CPUs on a non-preemptible kernel: since the scheduler will balance the kthreads across the CPUs and when the test time's out the test thread won't get a chance to be scheduled on any CPU then cannot notify the benchmark kthreads to stop. This can be easily reproduced on a VM (simulated with 16 CPUs) with PREEMPT_VOLUNTARY: estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1 rcu: INFO: rcu_sched self-detected stall on CPU rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0 rcu: (t=5254 jiffies g=-559 q=45 ncpus=16) rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12 rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008 Call trace __switch_to+0xec/0x138 __schedule+0x2f8/0x1080 schedule+0x30/0x130 schedule_timeout+0xa0/0x188 rcu_gp_fqs_loop+0x128/0x528 rcu_gp_kthread+0x1c8/0x208 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Sending NMI from CPU 10 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730 lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730 sp : ffff80008748b630 x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780 x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70 x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000 x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1 x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8 x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000 x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1 x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c Call trace: arm_smmu_cmdq_issue_cmdlist+0x218/0x730 __arm_smmu_tlb_inv_range+0xe0/0x1a8 arm_smmu_iotlb_sync+0xc0/0x128 __iommu_dma_unmap+0x248/0x320 iommu_dma_unmap_page+0x5c/0xe8 dma_unmap_page_attrs+0x38/0x1d0 map_benchmark_thread+0x118/0x2c0 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Solve this by adding scheduling point in the kthread loop, so if there're other threads in the system they may have a chance to run, especially the thread to notify the test end. However this may degrade the test concurrency so it's recommended to run this on an idle system. Signed-off-by: Yicong Yang Acked-by: Barry Song Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

cgroup: Protect css->cgroup write under css_set_lock

2024-09-12T09:10:22Z

[ Upstream commit 57b56d16800e8961278ecff0dc755d46c4575092 ] The writing of css->cgroup associated with the cgroup root in rebind_subsystems() is currently protected only by cgroup_mutex. However, the reading of css->cgroup in both proc_cpuset_show() and proc_cgroup_show() is protected just by css_set_lock. That makes the readers susceptible to racing problems like data tearing or caching. It is also a problem that can be reported by KCSAN. This can be fixed by using READ_ONCE() and WRITE_ONCE() to access css->cgroup. Alternatively, the writing of css->cgroup can be moved under css_set_lock as well which is done by this patch. Signed-off-by: Waiman Long Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

tracing: Avoid possible softlockup in tracing_iter_reset()

2024-09-12T09:10:18Z

commit 49aa8a1f4d6800721c7971ed383078257f12e8f9 upstream. In __tracing_open(), when max latency tracers took place on the cpu, the time start of its buffer would be updated, then event entries with timestamps being earlier than start of the buffer would be skipped (see tracing_iter_reset()). Softlockup will occur if the kernel is non-preemptible and too many entries were skipped in the loop that reset every cpu buffer, so add cond_resched() to avoid it. Cc: stable@vger.kernel.org Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces") Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com Suggested-by: Steven Rostedt Signed-off-by: Zheng Yejian Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

rtmutex: Drop rt_mutex::wait_lock before scheduling

2024-09-12T09:10:17Z

commit d33d26036a0274b472299d7dcdaa5fb34329f91b upstream. rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the good case it returns with the lock held and in the deadlock case it emits a warning and goes into an endless scheduling loop with the lock held, which triggers the 'scheduling in atomic' warning. Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning and dropping into the schedule for ever loop. [ tglx: Moved unlock before the WARN(), removed the pointless comment, massaged changelog, added Fixes tag ] Fixes: 3d5c9340d194 ("rtmutex: Handle deadlock detection smarter") Signed-off-by: Roland Xu Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/ME0P300MB063599BEF0743B8FA339C2CECC802@ME0P300MB0635.AUSP300.PROD.OUTLOOK.COM Signed-off-by: Greg Kroah-Hartman