user/sven/linux.git/kernel, branch v6.6.62

bpf: Check validity of link->type in bpf_link_show_fdinfo()

2024-11-17T14:08:58Z

[ Upstream commit 8421d4c8762bd022cb491f2f0f7019ef51b4f0a7 ] If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing bpf_link_type_strs[link->type] may result in an out-of-bounds access. To spot such missed invocations early in the future, checking the validity of link->type in bpf_link_show_fdinfo() and emitting a warning when such invocations are missed. Signed-off-by: Hou Tao Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com Signed-off-by: Sasha Levin

bpf: use kvzmalloc to allocate BPF verifier environment

2024-11-17T14:08:56Z

[ Upstream commit 434247637c66e1be2bc71a9987d4c3f0d8672387 ] The kzmalloc call in bpf_check can fail when memory is very fragmented, which in turn can lead to an OOM kill. Use kvzmalloc to fall back to vmalloc when memory is too fragmented to allocate an order 3 sized bpf verifier environment. Admittedly this is not a very common case, and only happens on systems where memory has already been squeezed close to the limit, but this does not seem like much of a hot path, and it's a simple enough fix. Signed-off-by: Rik van Riel Reviewed-by: Shakeel Butt Link: https://lore.kernel.org/r/20241008170735.16766766@imladris.surriel.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

ucounts: fix counter leak in inc_rlimit_get_ucounts()

2024-11-14T12:19:40Z

commit 432dc0654c612457285a5dcf9bb13968ac6f0804 upstream. The inc_rlimit_get_ucounts() increments the specified rlimit counter and then checks its limit. If the value exceeds the limit, the function returns an error without decrementing the counter. Link: https://lkml.kernel.org/r/20241101191940.3211128-1-roman.gushchin@linux.dev Fixes: 15bc01effefe ("ucounts: Fix signal ucount refcounting") Signed-off-by: Andrei Vagin Co-developed-by: Roman Gushchin Signed-off-by: Roman Gushchin Tested-by: Roman Gushchin Acked-by: Alexey Gladkov Cc: Kees Cook Cc: Andrei Vagin Cc: "Eric W. Biederman" Cc: Alexey Gladkov Cc: Oleg Nesterov Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

signal: restore the override_rlimit logic

2024-11-14T12:19:39Z

commit 9e05e5c7ee8758141d2db7e8fea2cab34500c6ed upstream. Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of signals. However now it's enforced unconditionally, even if override_rlimit is set. This behavior change caused production issues. For example, if the limit is reached and a process receives a SIGSEGV signal, sigqueue_alloc fails to allocate the necessary resources for the signal delivery, preventing the signal from being delivered with siginfo. This prevents the process from correctly identifying the fault address and handling the error. From the user-space perspective, applications are unaware that the limit has been reached and that the siginfo is effectively 'corrupted'. This can lead to unpredictable behavior and crashes, as we observed with java applications. Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip the comparison to max there if override_rlimit is set. This effectively restores the old behavior. Link: https://lkml.kernel.org/r/20241104195419.3962584-1-roman.gushchin@linux.dev Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") Signed-off-by: Roman Gushchin Co-developed-by: Andrei Vagin Signed-off-by: Andrei Vagin Acked-by: Oleg Nesterov Acked-by: Alexey Gladkov Cc: Kees Cook Cc: "Eric W. Biederman" Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on clone

2024-11-14T12:19:37Z

[ Upstream commit b5413156bad91dc2995a5c4eab1b05e56914638a ] When cloning a new thread, its posix_cputimers are not inherited, and are cleared by posix_cputimers_init(). However, this does not clear the tick dependency it creates in tsk->tick_dep_mask, and the handler does not reach the code to clear the dependency if there were no timers to begin with. Thus if a thread has a cputimer running before clone/fork, all descendants will prevent nohz_full unless they create a cputimer of their own. Fix this by entirely clearing the tick_dep_mask in copy_process(). (There is currently no inherited state that needs a tick dependency) Process-wide timers do not have this problem because fork does not copy signal_struct as a baseline, it creates one from scratch. Fixes: b78783000d5c ("posix-cpu-timers: Migrate to use new tick dependency mask model") Signed-off-by: Ben Segall Signed-off-by: Thomas Gleixner Reviewed-by: Frederic Weisbecker Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/xm26o737bq8o.fsf@google.com Signed-off-by: Sasha Levin

sched/numa: Fix the potential null pointer dereference in task_numa_work()

2024-11-08T15:28:25Z

[ Upstream commit 9c70b2a33cd2aa6a5a59c5523ef053bd42265209 ] When running stress-ng-vm-segv test, we found a null pointer dereference error in task_numa_work(). Here is the backtrace: [323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ...... [323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se ...... [323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--) [323676.067115] pc : vma_migratable+0x1c/0xd0 [323676.067122] lr : task_numa_work+0x1ec/0x4e0 [323676.067127] sp : ffff8000ada73d20 [323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010 [323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000 [323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000 [323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8 [323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035 [323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8 [323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4 [323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001 [323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000 [323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000 [323676.067152] Call trace: [323676.067153] vma_migratable+0x1c/0xd0 [323676.067155] task_numa_work+0x1ec/0x4e0 [323676.067157] task_work_run+0x78/0xd8 [323676.067161] do_notify_resume+0x1ec/0x290 [323676.067163] el0_svc+0x150/0x160 [323676.067167] el0t_64_sync_handler+0xf8/0x128 [323676.067170] el0t_64_sync+0x17c/0x180 [323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000) [323676.067177] SMP: stopping secondary CPUs [323676.070184] Starting crashdump kernel... stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error handling function of the system, which tries to cause a SIGSEGV error on return from unmapping the whole address space of the child process. Normally this program will not cause kernel crashes. But before the munmap system call returns to user mode, a potential task_numa_work() for numa balancing could be added and executed. In this scenario, since the child process has no vma after munmap, the vma_next() in task_numa_work() will return a null pointer even if the vma iterator restarts from 0. Recheck the vma pointer before dereferencing it in task_numa_work(). Fixes: 214dbc428137 ("sched: convert to vma iterator") Signed-off-by: Shawn Wang Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org # v6.2+ Link: https://lkml.kernel.org/r/20241025022208.125527-1-shawnwang@linux.alibaba.com Signed-off-by: Sasha Levin

cgroup/bpf: use a dedicated workqueue for cgroup bpf destruction

2024-11-08T15:28:24Z

[ Upstream commit 117932eea99b729ee5d12783601a4f7f5fd58a23 ] A hung_task problem shown below was found: INFO: task kworker/0:0:8 blocked for more than 327 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Workqueue: events cgroup_bpf_release Call Trace: __schedule+0x5a2/0x2050 ? find_held_lock+0x33/0x100 ? wq_worker_sleeping+0x9e/0xe0 schedule+0x9f/0x180 schedule_preempt_disabled+0x25/0x50 __mutex_lock+0x512/0x740 ? cgroup_bpf_release+0x1e/0x4d0 ? cgroup_bpf_release+0xcf/0x4d0 ? process_scheduled_works+0x161/0x8a0 ? cgroup_bpf_release+0x1e/0x4d0 ? mutex_lock_nested+0x2b/0x40 ? __pfx_delay_tsc+0x10/0x10 mutex_lock_nested+0x2b/0x40 cgroup_bpf_release+0xcf/0x4d0 ? process_scheduled_works+0x161/0x8a0 ? trace_event_raw_event_workqueue_execute_start+0x64/0xd0 ? process_scheduled_works+0x161/0x8a0 process_scheduled_works+0x23a/0x8a0 worker_thread+0x231/0x5b0 ? __pfx_worker_thread+0x10/0x10 kthread+0x14d/0x1c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x59/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 This issue can be reproduced by the following pressuse test: 1. A large number of cpuset cgroups are deleted. 2. Set cpu on and off repeatly. 3. Set watchdog_thresh repeatly. The scripts can be obtained at LINK mentioned above the signature. The reason for this issue is cgroup_mutex and cpu_hotplug_lock are acquired in different tasks, which may lead to deadlock. It can lead to a deadlock through the following steps: 1. A large number of cpusets are deleted asynchronously, which puts a large number of cgroup_bpf_release works into system_wq. The max_active of system_wq is WQ_DFL_ACTIVE(256). Consequently, all active works are cgroup_bpf_release works, and many cgroup_bpf_release works will be put into inactive queue. As illustrated in the diagram, there are 256 (in the acvtive queue) + n (in the inactive queue) works. 2. Setting watchdog_thresh will hold cpu_hotplug_lock.read and put smp_call_on_cpu work into system_wq. However step 1 has already filled system_wq, 'sscs.work' is put into inactive queue. 'sscs.work' has to wait until the works that were put into the inacvtive queue earlier have executed (n cgroup_bpf_release), so it will be blocked for a while. 3. Cpu offline requires cpu_hotplug_lock.write, which is blocked by step 2. 4. Cpusets that were deleted at step 1 put cgroup_release works into cgroup_destroy_wq. They are competing to get cgroup_mutex all the time. When cgroup_metux is acqured by work at css_killed_work_fn, it will call cpuset_css_offline, which needs to acqure cpu_hotplug_lock.read. However, cpuset_css_offline will be blocked for step 3. 5. At this moment, there are 256 works in active queue that are cgroup_bpf_release, they are attempting to acquire cgroup_mutex, and as a result, all of them are blocked. Consequently, sscs.work can not be executed. Ultimately, this situation leads to four processes being blocked, forming a deadlock. system_wq(step1) WatchDog(step2) cpu offline(step3) cgroup_destroy_wq(step4) ... 2000+ cgroups deleted asyn 256 actives + n inactives __lockup_detector_reconfigure P(cpu_hotplug_lock.read) put sscs.work into system_wq 256 + n + 1(sscs.work) sscs.work wait to be executed warting sscs.work finish percpu_down_write P(cpu_hotplug_lock.write) ...blocking... css_killed_work_fn P(cgroup_mutex) cpuset_css_offline P(cpu_hotplug_lock.read) ...blocking... 256 cgroup_bpf_release mutex_lock(&cgroup_mutex); ..blocking... To fix the problem, place cgroup_bpf_release works on a dedicated workqueue which can break the loop and solve the problem. System wqs are for misc things which shouldn't create a large number of concurrent work items. If something is going to generate >WQ_DFL_ACTIVE(256) concurrent work items, it should use its own dedicated workqueue. Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/cgroups/e90c32d2-2a85-4f28-9154-09c7d320cb60@huawei.com/T/#t Tested-by: Vishal Chourasia Signed-off-by: Chen Ridong Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()

2024-11-08T15:28:22Z

[ Upstream commit fd70e9f1d85f5323096ad313ba73f5fe3d15ea41 ] For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is defined as NR_CPUS instead of the number of possible cpus, this will cause the following system panic: smpboot: Allowing 4 CPUs, 0 hotplug CPUs ... setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 ... BUG: unable to handle page fault for address: ffffffff9911c8c8 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082 CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 Call Trace: ? __die+0x23/0x80 ? page_fault_oops+0xa4/0x180 ? exc_page_fault+0x152/0x180 ? asm_exc_page_fault+0x26/0x40 ? rcu_tasks_need_gpcb+0x25d/0x2c0 ? __pfx_rcu_tasks_kthread+0x40/0x40 rcu_tasks_one_gp+0x69/0x180 rcu_tasks_kthread+0x94/0xc0 kthread+0xe8/0x140 ? __pfx_kthread+0x40/0x40 ret_from_fork+0x34/0x80 ? __pfx_kthread+0x40/0x40 ret_from_fork_asm+0x1b/0x80 Considering that there may be holes in the CPU numbers, use the maximum possible cpu number, instead of nr_cpu_ids, for configuring enqueue and dequeue limits. [ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] Closes: https://lore.kernel.org/linux-input/CALMA0xaTSMN+p4xUXkzrtR5r6k7hgoswcaXx7baR_z9r5jjskw@mail.gmail.com/T/#u Reported-by: Zhixu Liu Signed-off-by: Zqiang Signed-off-by: Neeraj Upadhyay Signed-off-by: Sasha Levin

rcu-tasks: Initialize data to eliminate RCU-tasks/do_exit() deadlocks

2024-11-08T15:28:22Z

[ Upstream commit 46faf9d8e1d52e4a91c382c6c72da6bd8e68297b ] Holding a mutex across synchronize_rcu_tasks() and acquiring that same mutex in code called from do_exit() after its call to exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop() results in deadlock. This is by design, because tasks that are far enough into do_exit() are no longer present on the tasks list, making it a bit difficult for RCU Tasks to find them, let alone wait on them to do a voluntary context switch. However, such deadlocks are becoming more frequent. In addition, lockdep currently does not detect such deadlocks and they can be difficult to reproduce. In addition, if a task voluntarily context switches during that time (for example, if it blocks acquiring a mutex), then this task is in an RCU Tasks quiescent state. And with some adjustments, RCU Tasks could just as well take advantage of that fact. This commit therefore initializes the data structures that will be needed to rely on these quiescent states and to eliminate these deadlocks. Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/ Reported-by: Chen Zhongjin Reported-by: Yang Jihong Signed-off-by: Paul E. McKenney Tested-by: Yang Jihong Tested-by: Chen Zhongjin Reviewed-by: Frederic Weisbecker Signed-off-by: Boqun Feng Stable-dep-of: fd70e9f1d85f ("rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()") Signed-off-by: Sasha Levin

rcu-tasks: Add data to eliminate RCU-tasks/do_exit() deadlocks

2024-11-08T15:28:22Z

[ Upstream commit bfe93930ea1ea3c6c115a7d44af6e4fea609067e ] Holding a mutex across synchronize_rcu_tasks() and acquiring that same mutex in code called from do_exit() after its call to exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop() results in deadlock. This is by design, because tasks that are far enough into do_exit() are no longer present on the tasks list, making it a bit difficult for RCU Tasks to find them, let alone wait on them to do a voluntary context switch. However, such deadlocks are becoming more frequent. In addition, lockdep currently does not detect such deadlocks and they can be difficult to reproduce. In addition, if a task voluntarily context switches during that time (for example, if it blocks acquiring a mutex), then this task is in an RCU Tasks quiescent state. And with some adjustments, RCU Tasks could just as well take advantage of that fact. This commit therefore adds the data structures that will be needed to rely on these quiescent states and to eliminate these deadlocks. Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/ Reported-by: Chen Zhongjin Reported-by: Yang Jihong Signed-off-by: Paul E. McKenney Tested-by: Yang Jihong Tested-by: Chen Zhongjin Reviewed-by: Frederic Weisbecker Signed-off-by: Boqun Feng Stable-dep-of: fd70e9f1d85f ("rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()") Signed-off-by: Sasha Levin