user/sven/linux.git/kernel, branch v6.7.9

fprobe: Fix to allocate entry_data_size buffer with rethook instances

2024-03-06T14:53:57Z

commit 6572786006fa96ad2c35bb31757f1f861298093b upstream. Fix to allocate fprobe::entry_data_size buffer with rethook instances. If fprobe doesn't allocate entry_data_size buffer for each rethook instance, fprobe entry handler can cause a buffer overrun when storing entry data in entry handler. Link: https://lore.kernel.org/all/170920576727.107552.638161246679734051.stgit@devnote2/ Reported-by: Jiri Olsa Closes: https://lore.kernel.org/all/Zd9eBn2FTQzYyg7L@krava/ Fixes: 4bbd93455659 ("kprobes: kretprobe scalability improvement") Cc: stable@vger.kernel.org Tested-by: Jiri Olsa Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Greg Kroah-Hartman

bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel

2024-03-01T12:41:55Z

[ Upstream commit 0281b919e175bb9c3128bd3872ac2903e9436e3f ] The following race is possible between bpf_timer_cancel_and_free and bpf_timer_cancel. It will lead a UAF on the timer->timer. bpf_timer_cancel(); spin_lock(); t = timer->time; spin_unlock(); bpf_timer_cancel_and_free(); spin_lock(); t = timer->timer; timer->timer = NULL; spin_unlock(); hrtimer_cancel(&t->timer); kfree(t); /* UAF on t */ hrtimer_cancel(&t->timer); In bpf_timer_cancel_and_free, this patch frees the timer->timer after a rcu grace period. This requires a rcu_head addition to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init, this does not need a kfree_rcu because it is still under the spin_lock and timer->timer has not been visible by others yet. In bpf_timer_cancel, rcu_read_lock() is added because this helper can be used in a non rcu critical section context (e.g. from a sleepable bpf prog). Other timer->timer usages in helpers.c have been audited, bpf_timer_cancel() is the only place where timer->timer is used outside of the spin_lock. Another solution considered is to mark a t->flag in bpf_timer_cancel and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free, it busy waits for the flag to be cleared before kfree(t). This patch goes with a straight forward solution and frees timer->timer after a rcu grace period. Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Suggested-by: Alexei Starovoitov Signed-off-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann Acked-by: Hou Tao Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev Signed-off-by: Sasha Levin

sched/membarrier: reduce the ability to hammer on sys_membarrier

2024-02-23T08:51:59Z

commit 944d5fe50f3f03daacfea16300e656a1691c4a23 upstream. On some systems, sys_membarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine. Reviewed-and-tested-by: Mathieu Desnoyers Acked-by: Borislav Petkov Fixes: 22e4ebb97582 ("membarrier: Provide expedited private command") Fixes: c5f58bd58f43 ("membarrier: Provide GLOBAL_EXPEDITED command") Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

tracing: Inform kmemleak of saved_cmdlines allocation

2024-02-23T08:51:58Z

commit 2394ac4145ea91b92271e675a09af2a9ea6840b7 upstream. The allocation of the struct saved_cmdlines_buffer structure changed from: s = kmalloc(sizeof(*s), GFP_KERNEL); s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL); to: orig_size = sizeof(*s) + val * TASK_COMM_LEN; order = get_order(orig_size); size = 1 << (order + PAGE_SHIFT); page = alloc_pages(GFP_KERNEL, order); if (!page) return NULL; s = page_address(page); memset(s, 0, sizeof(*s)); s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL); Where that s->saved_cmdlines allocation looks to be a dangling allocation to kmemleak. That's because kmemleak only keeps track of kmalloc() allocations. For allocations that use page_alloc() directly, the kmemleak needs to be explicitly informed about it. Add kmemleak_alloc() and kmemleak_free() around the page allocation so that it doesn't give the following false positive: unreferenced object 0xffff8881010c8000 (size 32760): comm "swapper", pid 0, jiffies 4294667296 hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace (crc ae6ec1b9): [] kmemleak_alloc+0x45/0x80 [] __kmalloc_large_node+0x10d/0x190 [] __kmalloc+0x3b1/0x4c0 [] allocate_cmdlines_buffer+0x113/0x230 [] tracer_alloc_buffers.isra.0+0x124/0x460 [] early_trace_init+0x14/0xa0 [] start_kernel+0x12e/0x3c0 [] x86_64_start_reservations+0x18/0x30 [] x86_64_start_kernel+0x7b/0x80 [] secondary_startup_64_no_verify+0x15e/0x16b Link: https://lore.kernel.org/linux-trace-kernel/87r0hfnr9r.fsf@kernel.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240214112046.09a322d6@gandalf.local.home Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Catalin Marinas Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic") Reported-by: Kalle Valo Tested-by: Kalle Valo Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef

2024-02-23T08:51:58Z

commit bdbddb109c75365d22ec4826f480c5e75869e1cb upstream. Commit a8b9cf62ade1 ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default") attempted to fix an issue with direct trampolines on x86, see its description for details. However, it wrongly referenced the HAVE_DYNAMIC_FTRACE_WITH_REGS config option and the problem is still present. Add the missing "CONFIG_" prefix for the logic to work as intended. Link: https://lore.kernel.org/linux-trace-kernel/20240213132434.22537-1-petr.pavlu@suse.com Fixes: a8b9cf62ade1 ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default") Signed-off-by: Petr Pavlu Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default

2024-02-23T08:51:48Z

commit a8b9cf62ade1bf17261a979fc97e40c2d7842353 upstream. The commit 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS") changed DIRECT_CALLS to use SAVE_ARGS when there are multiple ftrace_ops at the same function, but since the x86 only support to jump to direct_call from ftrace_regs_caller, when we set the function tracer on the same target function on x86, ftrace-direct does not work as below (this actually works on arm64.) At first, insmod ftrace-direct.ko to put a direct_call on 'wake_up_process()'. # insmod kernel/samples/ftrace/ftrace-direct.ko # less trace ... -0 [006] ..s1. 564.686958: my_direct_func: waking up rcu_preempt-17 -0 [007] ..s1. 564.687836: my_direct_func: waking up kcompactd0-63 -0 [006] ..s1. 564.690926: my_direct_func: waking up rcu_preempt-17 -0 [006] ..s1. 564.696872: my_direct_func: waking up rcu_preempt-17 -0 [007] ..s1. 565.191982: my_direct_func: waking up kcompactd0-63 Setup a function filter to the 'wake_up_process' too, and enable it. # cd /sys/kernel/tracing/ # echo wake_up_process > set_ftrace_filter # echo function > current_tracer # less trace ... -0 [006] ..s3. 686.180972: wake_up_process <-call_timer_fn -0 [006] ..s3. 686.186919: wake_up_process <-call_timer_fn -0 [002] ..s3. 686.264049: wake_up_process <-call_timer_fn -0 [002] d.h6. 686.515216: wake_up_process <-kick_pool -0 [002] d.h6. 686.691386: wake_up_process <-kick_pool Then, only function tracer is shown on x86. But if you enable 'kprobe on ftrace' event (which uses SAVE_REGS flag) on the same function, it is shown again. # echo 'p wake_up_process' >> dynamic_events # echo 1 > events/kprobes/p_wake_up_process_0/enable # echo > trace # less trace ... -0 [006] ..s2. 2710.345919: p_wake_up_process_0: (wake_up_process+0x4/0x20) -0 [006] ..s3. 2710.345923: wake_up_process <-call_timer_fn -0 [006] ..s1. 2710.345928: my_direct_func: waking up rcu_preempt-17 -0 [006] ..s2. 2710.349931: p_wake_up_process_0: (wake_up_process+0x4/0x20) -0 [006] ..s3. 2710.349934: wake_up_process <-call_timer_fn -0 [006] ..s1. 2710.349937: my_direct_func: waking up rcu_preempt-17 To fix this issue, use SAVE_REGS flag for multiple ftrace_ops flag of direct_call by default. Link: https://lore.kernel.org/linux-trace-kernel/170484558617.178953.1590516949390270842.stgit@devnote2 Fixes: 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS") Cc: stable@vger.kernel.org Cc: Florent Revest Signed-off-by: Masami Hiramatsu (Google) Reviewed-by: Mark Rutland Tested-by: Mark Rutland [arm64] Acked-by: Jiri Olsa Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

ring-buffer: Clean ring_buffer_poll_wait() error return

2024-02-23T08:51:47Z

commit 66bbea9ed6446b8471d365a22734dc00556c4785 upstream. The return type for ring_buffer_poll_wait() is __poll_t. This is behind the scenes an unsigned where we can set event bits. In case of a non-allocated CPU, we do return instead -EINVAL (0xffffffea). Lucky us, this ends up setting few error bits (EPOLLERR | EPOLLHUP | EPOLLNVAL), so user-space at least is aware something went wrong. Nonetheless, this is an incorrect code. Replace that -EINVAL with a proper EPOLLERR to clean that output. As this doesn't change the behaviour, there's no need to treat this change as a bug fix. Link: https://lore.kernel.org/linux-trace-kernel/20240131140955.3322792-1-vdonnefort@google.com Cc: stable@vger.kernel.org Fixes: 6721cb6002262 ("ring-buffer: Do not poll non allocated cpu buffers") Signed-off-by: Vincent Donnefort Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

getrusage: use sig->stats_lock rather than lock_task_sighand()

2024-02-23T08:51:45Z

commit f7ec1cd5cc7ef3ad964b677ba82b8b77f1c93009 upstream. lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call getrusage() at the same time and the process has NR_THREADS, spin_lock_irq will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change getrusage() to use sig->stats_lock, it was specifically designed for this type of use. This way it runs lockless in the likely case. TODO: - Change do_task_stat() to use sig->stats_lock too, then we can remove spin_lock_irq(siglock) in wait_task_zombie(). - Turn sig->stats_lock into seqcount_rwlock_t, this way the readers in the slow mode won't exclude each other. See https://lore.kernel.org/all/20230913154907.GA26210@redhat.com/ - stats_lock has to disable irqs because ->siglock can be taken in irq context, it would be very nice to change __exit_signal() to avoid the siglock->stats_lock dependency. Link: https://lkml.kernel.org/r/20240122155053.GA26214@redhat.com Signed-off-by: Oleg Nesterov Reported-by: Dylan Hatch Tested-by: Dylan Hatch Cc: Eric W. Biederman Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()

2024-02-23T08:51:45Z

commit daa694e4137571b4ebec330f9a9b4d54aa8b8089 upstream. Patch series "getrusage: use sig->stats_lock", v2. This patch (of 2): thread_group_cputime() does its own locking, we can safely shift thread_group_cputime_adjusted() which does another for_each_thread loop outside of ->siglock protected section. This is also preparation for the next patch which changes getrusage() to use stats_lock instead of siglock, thread_group_cputime() takes the same lock. With the current implementation recursive read_seqbegin_or_lock() is fine, thread_group_cputime() can't enter the slow mode if the caller holds stats_lock, yet this looks more safe and better performance-wise. Link: https://lkml.kernel.org/r/20240122155023.GA26169@redhat.com Link: https://lkml.kernel.org/r/20240122155050.GA26205@redhat.com Signed-off-by: Oleg Nesterov Reported-by: Dylan Hatch Tested-by: Dylan Hatch Cc: Eric W. Biederman Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

Revert "workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()"

2024-02-23T08:51:41Z

commit aac8a59537dfc704ff344f1aacfd143c089ee20f upstream. This reverts commit ca10d851b9ad0338c19e8e3089e24d565ebfffd7. The commit allowed workqueue_apply_unbound_cpumask() to clear __WQ_ORDERED on now removed implicitly ordered workqueues. This was incorrect in that system-wide config change shouldn't break ordering properties of all workqueues. The reason why apply_workqueue_attrs() path was allowed to do so was because it was targeting the specific workqueue - either the workqueue had WQ_SYSFS set or the workqueue user specifically tried to change max_active, both of which indicate that the workqueue doesn't need to be ordered. The implicitly ordered workqueue promotion was removed by the previous commit 3bc1e711c26b ("workqueue: Don't implicitly make UNBOUND workqueues w/ @max_active==1 ordered"). However, it didn't update this path and broke build. Let's revert the commit which was incorrect in the first place which also fixes build. Signed-off-by: Tejun Heo Fixes: 3bc1e711c26b ("workqueue: Don't implicitly make UNBOUND workqueues w/ @max_active==1 ordered") Fixes: ca10d851b9ad ("workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()") Cc: stable@vger.kernel.org # v6.6+ Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman