user/sven/linux.git/lib/Kconfig, branch v5.9.2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21Z

Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...

lib: Add zstd support to decompress

2020-07-31T09:49:08Z

- Add unzstd() and the zstd decompress interface. - Add zstd support to decompress_method(). The decompress_method() and unzstd() functions are used to decompress the initramfs and the initrd. The __decompress() function is used in the preboot environment to decompress a zstd compressed kernel. The zstd decompression function allows the input and output buffers to overlap because that is used by x86 kernel decompression. Signed-off-by: Nick Terrell Signed-off-by: Ingo Molnar Tested-by: Sedat Dilek Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com

Add pldmfw library for PLDM firmware update

2020-07-29T00:07:06Z

The pldmfw library is used to implement common logic needed to flash devices based on firmware files using the format described by the PLDM for Firmware Update standard. This library consists of logic to parse the PLDM file format from a firmware file object, as well as common logic for sending the relevant PLDM header data to the device firmware. A simple ops table is provided so that device drivers can implement device specific hardware interactions while keeping the common logic to the pldmfw library. This library will be used by the Intel ice networking driver as part of implementing device flash update via devlink. The library aims to be vendor and device agnostic. For this reason, it has been placed in lib/pldmfw, in the hopes that other devices which use the PLDM firmware file format may benefit from it in the future. However, do note that not all features defined in the PLDM standard have been implemented. Signed-off-by: Jacob Keller Signed-off-by: David S. Miller

Merge tag 'docs-5.8' of git://git.lwn.net/linux

2020-06-01T22:45:27Z

Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2020-06-01T22:18:27Z

Pull arm64 updates from Will Deacon: "A sizeable pile of arm64 updates for 5.8. Summary below, but the big two features are support for Branch Target Identification and Clang's Shadow Call stack. The latter is currently arm64-only, but the high-level parts are all in core code so it could easily be adopted by other architectures pending toolchain support Branch Target Identification (BTI): - Support for ARMv8.5-BTI in both user- and kernel-space. This allows branch targets to limit the types of branch from which they can be called and additionally prevents branching to arbitrary code, although kernel support requires a very recent toolchain. - Function annotation via SYM_FUNC_START() so that assembly functions are wrapped with the relevant "landing pad" instructions. - BPF and vDSO updates to use the new instructions. - Addition of a new HWCAP and exposure of BTI capability to userspace via ID register emulation, along with ELF loader support for the BTI feature in .note.gnu.property. - Non-critical fixes to CFI unwind annotations in the sigreturn trampoline. Shadow Call Stack (SCS): - Support for Clang's Shadow Call Stack feature, which reserves platform register x18 to point at a separate stack for each task that holds only return addresses. This protects function return control flow from buffer overruns on the main stack. - Save/restore of x18 across problematic boundaries (user-mode, hypervisor, EFI, suspend, etc). - Core support for SCS, should other architectures want to use it too. - SCS overflow checking on context-switch as part of the existing stack limit check if CONFIG_SCHED_STACK_END_CHECK=y. CPU feature detection: - Removed numerous "SANITY CHECK" errors when running on a system with mismatched AArch32 support at EL1. This is primarily a concern for KVM, which disabled support for 32-bit guests on such a system. - Addition of new ID registers and fields as the architecture has been extended. Perf and PMU drivers: - Minor fixes and cleanups to system PMU drivers. Hardware errata: - Unify KVM workarounds for VHE and nVHE configurations. - Sort vendor errata entries in Kconfig. Secure Monitor Call Calling Convention (SMCCC): - Update to the latest specification from Arm (v1.2). - Allow PSCI code to query the SMCCC version. Software Delegated Exception Interface (SDEI): - Unexport a bunch of unused symbols. - Minor fixes to handling of firmware data. Pointer authentication: - Add support for dumping the kernel PAC mask in vmcoreinfo so that the stack can be unwound by tools such as kdump. - Simplification of key initialisation during CPU bringup. BPF backend: - Improve immediate generation for logical and add/sub instructions. vDSO: - Minor fixes to the linker flags for consistency with other architectures and support for LLVM's unwinder. - Clean up logic to initialise and map the vDSO into userspace. ACPI: - Work around for an ambiguity in the IORT specification relating to the "num_ids" field. - Support _DMA method for all named components rather than only PCIe root complexes. - Minor other IORT-related fixes. Miscellaneous: - Initialise debug traps early for KGDB and fix KDB cacheflushing deadlock. - Minor tweaks to early boot state (documentation update, set TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections). - Refactoring and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits) KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h KVM: arm64: Check advertised Stage-2 page size capability arm64/cpufeature: Add get_arm64_ftr_reg_nowarn() ACPI/IORT: Remove the unused __get_pci_rid() arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register arm64/cpufeature: Add remaining feature bits in ID_PFR0 register arm64/cpufeature: Introduce ID_MMFR5 CPU register arm64/cpufeature: Introduce ID_DFR1 CPU register arm64/cpufeature: Introduce ID_PFR2 CPU register arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0 arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register arm64: mm: Add asid_gen_match() helper firmware: smccc: Fix missing prototype warning for arm_smccc_version_init arm64: vdso: Fix CFI directives in sigreturn trampoline arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction ...

lib: add linear ranges helpers

2020-05-08T17:18:11Z

Many devices have control registers which control some measurable property. Often a register contains control field so that change in this field causes linear change in the controlled property. It is not a rare case that user wants to give 'meaningful' control values and driver needs to convert them to register field values. Even more often user wants to 'see' the currently set value - again in meaningful units - and driver needs to convert the values it reads from register to these meaningful units. Examples of this include: - regulators, voltage/current configurations - power, voltage/current configurations - clk(?) NCOs and maybe others I can't think of right now. Provide a linear_range helper which can do conversion from user value to register value 'selector'. The idea here is stolen from regulator framework and patches refactoring the regulator helpers to use this are following. Current implementation does not support inversely proportional ranges but it might be useful if we could support also inversely proportional ranges? Signed-off-by: Matti Vaittinen Reviewed-by: Mark Brown Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/59259bc475e0c800eb4bb163f02528c7c01f7b3a.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown

docs: Add rbtree documentation to the core-api

2020-04-21T16:29:19Z

This file is close enough to being in rst format that I didn't feel the need to alter it in any way. Signed-off-by: Matthew Wilcox (Oracle) Acked-by: Michel Lespinasse Link: https://lore.kernel.org/r/20200401173343.17472-1-willy@infradead.org Signed-off-by: Jonathan Corbet

x86/asm: Provide a Kconfig symbol for disabling old assembly annotations

2020-04-18T15:43:09Z

As x86 was converted to use the modern SYM_ annotations for assembly, ifdefs were added to remove the generic definitions of the old style annotations on x86. Rather than collect a list of architectures in the ifdefs as more architectures are converted over, provide a Kconfig symbol for this and update x86 to use it. Signed-off-by: Mark Brown Signed-off-by: Borislav Petkov Acked-by: Jiri Slaby Link: https://lkml.kernel.org/r/20200416182402.6206-1-broonie@kernel.org

mm/memremap_pages: Introduce memremap_compat_align()

2020-02-21T00:58:55Z

The "sub-section memory hotplug" facility allows memremap_pages() users like libnvdimm to compensate for hardware platforms like x86 that have a section size larger than their hardware memory mapping granularity. The compensation that sub-section support affords is being tolerant of physical memory resources shifting by units smaller (64MiB on x86) than the memory-hotplug section size (128 MiB). Where the platform physical-memory mapping granularity is limited by the number and capability of address-decode-registers in the memory controller. While the sub-section support allows memremap_pages() to operate on sub-section (2MiB) granularity, the Power architecture may still require 16MiB alignment on "!radix_enabled()" platforms. In order for libnvdimm to be able to detect and manage this per-arch limitation, introduce memremap_compat_align() as a common minimum alignment across all driver-facing memory-mapping interfaces, and let Power override it to 16MiB in the "!radix_enabled()" case. The assumption / requirement for 16MiB to be a viable memremap_compat_align() value is that Power does not have platforms where its equivalent of address-decode-registers never hardware remaps a persistent memory resource on smaller than 16MiB boundaries. Note that I tried my best to not add a new Kconfig symbol, but header include entanglements defeated the #ifndef memremap_compat_align design pattern and the need to export it defeats the __weak design pattern for arch overrides. Based on an initial patch by Aneesh. Link: http://lore.kernel.org/r/CAPcyv4gBGNP95APYaBcsocEa50tQj9b5h__83vgngjq3ouGX_Q@mail.gmail.com Reported-by: Aneesh Kumar K.V Reported-by: Jeff Moyer Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Reviewed-by: Aneesh Kumar K.V Acked-by: Michael Ellerman (powerpc) Signed-off-by: Dan Williams

Merge tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2020-02-12T00:39:18Z

Pull tracing fixes from Steven Rostedt: "Various fixes: - Fix an uninitialized variable - Fix compile bug to bootconfig userspace tool (in tools directory) - Suppress some error messages of bootconfig userspace tool - Remove unneded CONFIG_LIBXBC from bootconfig - Allocate bootconfig xbc_nodes dynamically. To ease complaints about taking up static memory at boot up - Use of parse_args() to parse bootconfig instead of strstr() usage Prevents issues of double quotes containing the interested string - Fix missing ring_buffer_nest_end() on synthetic event error path - Return zero not -EINVAL on soft disabled synthetic event (soft disabling must be the same as hard disabling, which returns zero) - Consolidate synthetic event code (remove duplicate code)" * tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Consolidate trace() functions tracing: Don't return -EINVAL when tracing soft disabled synth events tracing: Add missing nest end to synth_event_trace_start() error case tools/bootconfig: Suppress non-error messages bootconfig: Allocate xbc_nodes array dynamically bootconfig: Use parse_args() to find bootconfig and '--' tracing/kprobe: Fix uninitialized variable bug bootconfig: Remove unneeded CONFIG_LIBXBC tools/bootconfig: Fix wrong __VA_ARGS__ usage