user/sven/linux.git/lib/bug.c, branch v4.19.127

lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()

2018-03-10T00:40:01Z

Commit b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") changed the ordering of fixups, and did not take into account the case of x86 processing non-WARN() and non-BUG() exceptions. This would lead to output of a false BUG line with no other information. In the case of a refcount exception, it would be immediately followed by the refcount WARN(), producing very strange double-"cut here": lkdtm: attempting bad refcount_inc() overflow ------------[ cut here ]------------ Kernel BUG at 0000000065f29de5 [verbose debug info unavailable] ------------[ cut here ]------------ refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0 WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4 ... In the prior ordering, exceptions were searched first: do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str, ... if (fixup_exception(regs, trapnr)) return 0; - if (fixup_bug(regs, trapnr)) - return 0; - As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account needing to search the exception list first, since that had already happened. So, instead of searching the exception list twice (once in is_valid_bugaddr() and then again in fixup_exception()), just add a simple sanity check to report_bug() that will immediately bail out if a BUG() (or WARN()) entry is not found. Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast Fixes: b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") Signed-off-by: Kees Cook Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Richard Weinberger Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

bug: use %pB in BUG and stack protector failure

2018-03-10T00:40:01Z

The BUG and stack protector reports were still using a raw %p. This changes it to %pB for more meaningful output. Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Signed-off-by: Kees Cook Reviewed-by: Andrew Morton Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Richard Weinberger , Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

bug: define the "cut here" string in a single place

2017-11-18T00:10:01Z

The "cut here" string is used in a few paths. Define it in a single place. Link: http://lkml.kernel.org/r/1510100869-73751-3-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook Cc: Arnd Bergmann Cc: Fengguang Wu Cc: Ingo Molnar Cc: Josh Poimboeuf Cc: Peter Zijlstra (Intel) Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel debug: support resetting WARN_ONCE for all architectures

2017-11-18T00:10:01Z

Some architectures store the WARN_ONCE state in the flags field of the bug_entry. Clear that one too when resetting once state through /sys/kernel/debug/clear_warn_once Pointed out by Michael Ellerman Improves the earlier patch that add clear_warn_once. [ak@linux.intel.com: add a missing ifdef CONFIG_MODULES] Link: http://lkml.kernel.org/r/20171020170633.9593-1-andi@firstfloor.org [akpm@linux-foundation.org: fix unused var warning] [akpm@linux-foundation.org: Use 0200 for clear_warn_once file, per mpe] [akpm@linux-foundation.org: clear BUGFLAG_DONE in clear_once_table(), per mpe] Link: http://lkml.kernel.org/r/20171019204642.7404-1-andi@firstfloor.org Signed-off-by: Andi Kleen Tested-by: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

debug: Add _ONCE() logic to report_bug()

2017-03-30T07:37:20Z

Josh suggested moving the _ONCE logic inside the trap handler, using a bit in the bug_entry::flags field, avoiding the need for the extra variable. Sadly this only works for WARN_ON_ONCE(), since the others have printk() statements prior to triggering the trap. Still, this saves a fair amount of text and some data: text data filename 10682460 4530992 defconfig-build/vmlinux.orig 10665111 4530096 defconfig-build/vmlinux.patched Suggested-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar

sched/headers: Prepare to use instead of in

2017-03-02T07:42:38Z

We don't actually need the full rculist.h header in sched.h anymore, we will be able to include the smaller rcupdate.h header instead. But first update code that relied on the implicit header inclusion. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

lib/bug.c: use common WARN helper

2016-03-17T22:09:34Z

The traceoff_on_warning option doesn't have any effect on s390, powerpc, arm64, parisc, and sh because there are two different types of WARN implementations: 1) The above mentioned architectures treat WARN() as a special case of a BUG() exception. They handle warnings in report_bug() in lib/bug.c. 2) All other architectures just call warn_slowpath_*() directly. Their warnings are handled in warn_slowpath_common() in kernel/panic.c. Support traceoff_on_warning on all architectures and prevent any future divergence by using a single common function to emit the warning. Also remove the '()' from '%pS()', because the parentheses look funky: [ 45.607629] WARNING: at /root/warn_mod/warn_mod.c:17 .init_dummy+0x20/0x40 [warn_mod]() Reported-by: Chunyu Hu Signed-off-by: Josh Poimboeuf Acked-by: Heiko Carstens Tested-by: Prarit Bhargava Acked-by: Prarit Bhargava Acked-by: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

lib/bug.c: make panic_on_warn available for all architectures

2016-03-17T22:09:34Z

Christian Borntraeger reported that panic_on_warn doesn't have any effect on s390. The panic_on_warn feature was introduced with 9e3961a09798 ("kernel: add panic_on_warn"). However it did care only for the case when WANT_WARN_ON_SLOWPATH is defined. This is turn is only the case for architectures which do not have an own __WARN_TAINT defined. Other architectures which do have __WARN_TAINT defined call report_bug() for warnings within lib/bug.c which does not call panic() in case panic_on_warn is set. Let's simply enable the panic_on_warn feature by adding the same code like it was added to warn_slowpath_common() in panic.c. This enables panic_on_warn also for arm64, parisc, powerpc, s390 and sh. Signed-off-by: Heiko Carstens Reported-by: Christian Borntraeger Tested-by: Christian Borntraeger Acked-by: Prarit Bhargava Cc: Catalin Marinas Cc: Will Deacon Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Tested-by: Michael Ellerman (powerpc) Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

module: Sanitize RCU usage and locking

2015-05-28T02:01:52Z

Currently the RCU usage in module is an inconsistent mess of RCU and RCU-sched, this is broken for CONFIG_PREEMPT where synchronize_rcu() does not imply synchronize_sched(). Most usage sites use preempt_{dis,en}able() which is RCU-sched, but (most of) the modification sites use synchronize_rcu(). With the exception of the module bug list, which actually uses RCU. Convert everything over to RCU-sched. Furthermore add lockdep asserts to all sites, because it's not at all clear to me the required locking is observed, esp. on exported functions. Cc: Rusty Russell Acked-by: "Paul E. McKenney" Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Rusty Russell