user/sven/linux.git/lib/lockref.c, branch v5.4.262

lockref: stop doing cpu_relax in the cmpxchg loop

2023-02-06T06:52:42Z

[ Upstream commit f5fe24ef17b5fbe6db49534163e77499fb10ae8c ] On the x86-64 architecture even a failing cmpxchg grants exclusive access to the cacheline, making it preferable to retry the failed op immediately instead of stalling with the pause instruction. To illustrate the impact, below are benchmark results obtained by running various will-it-scale tests on top of the 6.2-rc3 kernel and Cascade Lake (2 sockets * 24 cores * 2 threads) CPU. All results in ops/s. Note there is some variance in re-runs, but the code is consistently faster when contention is present. open3 ("Same file open/close"): proc stock no-pause 1 805603 814942 (+%1) 2 1054980 1054781 (-0%) 8 1544802 1822858 (+18%) 24 1191064 2199665 (+84%) 48 851582 1469860 (+72%) 96 609481 1427170 (+134%) fstat2 ("Same file fstat"): proc stock no-pause 1 3013872 3047636 (+1%) 2 4284687 4400421 (+2%) 8 3257721 5530156 (+69%) 24 2239819 5466127 (+144%) 48 1701072 5256609 (+209%) 96 1269157 6649326 (+423%) Additionally, a kernel with a private patch to help access() scalability: access2 ("Same file access"): proc stock patched patched +nopause 24 2378041 2005501 5370335 (-15% / +125%) That is, fixing the problems in access itself *reduces* scalability after the cacheline ping-pong only happens in lockref with the pause instruction. Note that fstat and access benchmarks are not currently integrated into will-it-scale, but interested parties can find them in pull requests to said project. Code at hand has a rather tortured history. First modification showed up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written with Itanium in mind. Later it got patched up to use an arch-dependent macro to stop doing it on s390 where it caused a significant regression. Said macro had undergone revisions and was ultimately eliminated later, going back to cpu_relax. While I intended to only remove cpu_relax for x86-64, I got the following comment from Linus: I would actually prefer just removing it entirely and see if somebody else hollers. You have the numbers to prove it hurts on real hardware, and I don't think we have any numbers to the contrary. So I think it's better to trust the numbers and remove it as a failure, than say "let's just remove it on x86-64 and leave everybody else with the potentially broken code" Additionally, Will Deacon (maintainer of the arm64 port, one of the architectures previously benchmarked): So, from the arm64 side of the fence, I'm perfectly happy just removing the cpu_relax() calls from lockref. As such, come back full circle in history and whack it altogether. Signed-off-by: Mateusz Guzik Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/ Acked-by: Tony Luck # ia64 Acked-by: Nicholas Piggin # powerpc Acked-by: Will Deacon # arm64 Acked-by: Peter Zijlstra Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

lockref: Limit number of cmpxchg loop retries

2019-06-07T20:15:06Z

The lockref cmpxchg loop is unbound as long as the spinlock is not taken. Depending on the hardware implementation of compare-and-swap a high number of loop retries might happen. Add an upper bound to the loop to force the fallback to spinlocks after some time. A retry value of 100 should not impact any hardware that does not have this issue. With the retry limit the performance of an open-close testcase improved between 60-70% on ThunderX2. Suggested-by: Linus Torvalds Signed-off-by: Jan Glauber Signed-off-by: Linus Torvalds

lockref: Add lockref_put_not_zero

2018-04-12T16:41:19Z

Put a lockref unless the lockref is dead or its count would become zero. This is the same as lockref_put_or_lock except that the lock is never left held. Signed-off-by: Andreas Gruenbacher Signed-off-by: Bob Peterson

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

locking/core: Remove cpu_relax_lowlatency() users

2016-11-16T09:15:10Z

With the s390 special case of a yielding cpu_relax() implementation gone, we can now remove all users of cpu_relax_lowlatency() and replace them with cpu_relax(). Signed-off-by: Christian Borntraeger Signed-off-by: Peter Zijlstra (Intel) Cc: Catalin Marinas Cc: Heiko Carstens Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Nicholas Piggin Cc: Noam Camus Cc: Peter Zijlstra Cc: Russell King Cc: Thomas Gleixner Cc: Will Deacon Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1477386195-32736-5-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar

locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition

2015-08-12T09:59:04Z

cmpxchg64_relaxed() is now defined by linux/atomic.h, so we can remove our local definition from the lockref code. Signed-off-by: Will Deacon Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Waiman.Long@hp.com Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1438880084-18856-5-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar

locking: Remove ACCESS_ONCE() usage

2015-02-24T07:44:16Z

With the new standardized functions, we can replace all ACCESS_ONCE() calls across relevant locking - this includes lockref and seqlock while at it. ACCESS_ONCE() does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 Update the new calls regardless of if it is a scalar type, this is cleaner than having three alternatives. Signed-off-by: Davidlohr Bueso Cc: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Cc: Thomas Gleixner Cc: Paul E. McKenney Link: http://lkml.kernel.org/r/1424662301.6539.18.camel@stgolabs.net Signed-off-by: Ingo Molnar

dcache: let the dentry count go down to zero without taking d_lock

2015-01-26T04:16:29Z

We can be more aggressive about this, if we are clever and careful. This is subtle. Signed-off-by: Linus Torvalds Signed-off-by: Al Viro

arch, locking: Ciao arch_mutex_cpu_relax()

2014-07-17T10:32:47Z

The arch_mutex_cpu_relax() function, introduced by 34b133f, is hacky and ugly. It was added a few years ago to address the fact that common cpu_relax() calls include yielding on s390, and thus impact the optimistic spinning functionality of mutexes. Nowadays we use this function well beyond mutexes: rwsem, qrwlock, mcs and lockref. Since the macro that defines the call is in the mutex header, any users must include mutex.h and the naming is misleading as well. This patch (i) renames the call to cpu_relax_lowlatency ("relax, but only if you can do it with very low latency") and (ii) defines it in each arch's asm/processor.h local header, just like for regular cpu_relax functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax, and thus we can take it out of mutex.h. While this can seem redundant, I believe it is a good choice as it allows us to move out arch specific logic from generic locking primitives and enables future(?) archs to transparently define it, similarly to System Z. Signed-off-by: Davidlohr Bueso Signed-off-by: Peter Zijlstra Cc: Andrew Morton Cc: Anton Blanchard Cc: Aurelien Jacquiot Cc: Benjamin Herrenschmidt Cc: Bharat Bhushan Cc: Catalin Marinas Cc: Chen Liqin Cc: Chris Metcalf Cc: Christian Borntraeger Cc: Chris Zankel Cc: David Howells Cc: David S. Miller Cc: Deepthi Dharwar Cc: Dominik Dingel Cc: Fenghua Yu Cc: Geert Uytterhoeven Cc: Guan Xuetao Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Heiko Carstens Cc: Helge Deller Cc: Hirokazu Takata Cc: Ivan Kokshaysky Cc: James E.J. Bottomley Cc: James Hogan Cc: Jason Wang Cc: Jesper Nilsson Cc: Joe Perches Cc: Jonas Bonn Cc: Joseph Myers Cc: Kees Cook Cc: Koichi Yasutake Cc: Lennox Wu Cc: Linus Torvalds Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Max Filippov Cc: Michael Neuling Cc: Michal Simek Cc: Mikael Starvik Cc: Nicolas Pitre Cc: Paolo Bonzini Cc: Paul Burton Cc: Paul E. McKenney Cc: Paul Gortmaker Cc: Paul Mackerras Cc: Qais Yousef Cc: Qiaowei Ren Cc: Rafael Wysocki Cc: Ralf Baechle Cc: Richard Henderson Cc: Richard Kuo Cc: Russell King Cc: Steven Miao Cc: Steven Rostedt Cc: Stratos Karafotis Cc: Tim Chen Cc: Tony Luck Cc: Vasily Kulikov Cc: Vineet Gupta Cc: Vineet Gupta Cc: Waiman Long Cc: Will Deacon Cc: Wolfram Sang Cc: adi-buildroot-devel@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-alpha@vger.kernel.org Cc: linux-am33-list@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-cris-kernel@axis.com Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux@lists.openrisc.net Cc: linux-m32r-ja@ml.linux-m32r.org Cc: linux-m32r@ml.linux-m32r.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-metag@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net Signed-off-by: Ingo Molnar

lockref: include mutex.h rather than reinvent arch_mutex_cpu_relax

2013-11-28T04:37:33Z

arch_mutex_cpu_relax is already conditionally defined in mutex.h, so simply include that header rather than replicate the code here. Signed-off-by: Will Deacon Signed-off-by: Linus Torvalds