user/sven/linux.git/lib, branch v4.9.328

ratelimit: Fix data-races in ___ratelimit().

2022-09-05T08:23:55Z

[ Upstream commit 6bae8ceb90ba76cdba39496db936164fa672b9be ] While reading rs->interval and rs->burst, they can be changed concurrently via sysctl (e.g. net_ratelimit_state). Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ida: don't use BUG_ON() for debugging

2022-07-12T14:26:25Z

commit fc82bbf4dede758007763867d0282353c06d1121 upstream. This is another old BUG_ON() that just shouldn't exist (see also commit a382f8fee42c: "signal handling: don't use BUG_ON() for debugging"). In fact, as Matthew Wilcox points out, this condition shouldn't really even result in a warning, since a negative id allocation result is just a normal allocation failure: "I wonder if we should even warn here -- sure, the caller is trying to free something that wasn't allocated, but we don't warn for kfree(NULL)" and goes on to point out how that current error check is only causing people to unnecessarily do their own index range checking before freeing it. This was noted by Itay Iellin, because the bluetooth HCI socket cookie code does *not* do that range checking, and ends up just freeing the error case too, triggering the BUG_ON(). The HCI code requires CAP_NET_RAW, and seems to just result in an ugly splat, but there really is no reason to BUG_ON() here, and we have generally striven for allocation models where it's always ok to just do free(alloc()); even if the allocation were to fail for some random reason (usually obviously that "random" reason being some resource limit). Fixes: 88eca0207cf1 ("ida: simplified functions for id allocation") Reported-by: Itay Iellin Suggested-by: Matthew Wilcox Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

swiotlb: skip swiotlb_bounce when orig_addr is zero

2022-07-02T14:17:16Z

After patch ddbd89deb7d3 ("swiotlb: fix info leak with DMA_FROM_DEVICE"), swiotlb_bounce will be called in swiotlb_tbl_map_single unconditionally. This requires that the physical address must be valid, which is not always true on stable-4.19 or earlier version. On stable-4.19, swiotlb_alloc_buffer will call swiotlb_tbl_map_single with orig_addr equal to zero, which cause such a panic: Unable to handle kernel paging request at virtual address ffffb77a40000000 ... pc : __memcpy+0x100/0x180 lr : swiotlb_bounce+0x74/0x88 ... Call trace: __memcpy+0x100/0x180 swiotlb_tbl_map_single+0x2c8/0x338 swiotlb_alloc+0xb4/0x198 __dma_alloc+0x84/0x1d8 ... On stable-4.9 and stable-4.14, swiotlb_alloc_coherent wille call map_single with orig_addr equal to zero, which can cause same panic. Fix this by skipping swiotlb_bounce when orig_addr is zero. Fixes: ddbd89deb7d3 ("swiotlb: fix info leak with DMA_FROM_DEVICE") Signed-off-by: Liu Shixin Signed-off-by: Greg Kroah-Hartman

Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

2022-06-25T09:45:19Z

commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 upstream. Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better. And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic Tested-by: Oleksandr Natalenko Cc: Christoph Hellwig Signed-off-by: Linus Torvalds [OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

swiotlb: fix info leak with DMA_FROM_DEVICE

2022-06-25T09:45:19Z

commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream. The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic Signed-off-by: Christoph Hellwig [OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

random: remove ratelimiting for in-kernel unseeded randomness

2022-06-25T09:45:14Z

commit cc1e127bfa95b5fb2f9307e7168bf8b2b45b4c5e upstream. The CONFIG_WARN_ALL_UNSEEDED_RANDOM debug option controls whether the kernel warns about all unseeded randomness or just the first instance. There's some complicated rate limiting and comparison to the previous caller, such that even with CONFIG_WARN_ALL_UNSEEDED_RANDOM enabled, developers still don't see all the messages or even an accurate count of how many were missed. This is the result of basically parallel mechanisms aimed at accomplishing more or less the same thing, added at different points in random.c history, which sort of compete with the first-instance-only limiting we have now. It turns out, however, that nobody cares about the first unseeded randomness instance of in-kernel users. The same first user has been there for ages now, and nobody is doing anything about it. It isn't even clear that anybody _can_ do anything about it. Most places that can do something about it have switched over to using get_random_bytes_wait() or wait_for_random_bytes(), which is the right thing to do, but there is still much code that needs randomness sometimes during init, and as a geeneral rule, if you're not using one of the _wait functions or the readiness notifier callback, you're bound to be doing it wrong just based on that fact alone. So warning about this same first user that can't easily change is simply not an effective mechanism for anything at all. Users can't do anything about it, as the Kconfig text points out -- the problem isn't in userspace code -- and kernel developers don't or more often can't react to it. Instead, show the warning for all instances when CONFIG_WARN_ALL_UNSEEDED_RANDOM is set, so that developers can debug things need be, or if it isn't set, don't show a warning at all. At the same time, CONFIG_WARN_ALL_UNSEEDED_RANDOM now implies setting random.ratelimit_disable=1 on by default, since if you care about one you probably care about the other too. And we can clean up usage around the related urandom_warning ratelimiter as well (whose behavior isn't changing), so that it properly counts missed messages after the 10 message threshold is reached. Cc: Theodore Ts'o Cc: Dominik Brodowski Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

siphash: use one source of truth for siphash permutations

2022-06-25T09:45:14Z

commit e73aaae2fa9024832e1f42e30c787c7baf61d014 upstream. The SipHash family of permutations is currently used in three places: - siphash.c itself, used in the ordinary way it was intended. - random32.c, in a construction from an anonymous contributor. - random.c, as part of its fast_mix function. Each one of these places reinvents the wheel with the same C code, same rotation constants, and same symmetry-breaking constants. This commit tidies things up a bit by placing macros for the permutations and constants into siphash.h, where each of the three .c users can access them. It also leaves a note dissuading more users of them from emerging. Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

uapi: rename ext2_swab() to swab() and share globally in swab.h

2022-06-25T09:45:14Z

[ Upstream commit d5767057c9a76a29f073dad66b7fa12a90e8c748 ] ext2_swab() is defined locally in lib/find_bit.c However it is not specific to ext2, neither to bitmaps. There are many potential users of it, so rename it to just swab() and move to include/uapi/linux/swab.h ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG, therefore drop unneeded cast. Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com Signed-off-by: Yury Norov Cc: Allison Randal Cc: Joe Perches Cc: Thomas Gleixner Cc: William Breathitt Gray Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

random: replace custom notifier chain with standard one

2022-06-25T09:45:11Z

commit 5acd35487dc911541672b3ffc322851769c32a56 upstream. We previously rolled our own randomness readiness notifier, which only has two users in the whole kernel. Replace this with a more standard atomic notifier block that serves the same purpose with less code. Also unexport the symbols, because no modules use it, only unconditional builtins. The only drawback is that it's possible for a notification handler returning the "stop" code to prevent further processing, but given that there are only two users, and that we're unexporting this anyway, that doesn't seem like a significant drawback for the simplification we receive here. Cc: Greg Kroah-Hartman Cc: Theodore Ts'o Reviewed-by: Dominik Brodowski [Jason: for stable, also backported to crypto/drbg.c, not unexporting.] Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: remove unused tracepoints

2022-06-25T09:45:08Z

commit 14c174633f349cb41ea90c2c0aaddac157012f74 upstream. These explicit tracepoints aren't really used and show sign of aging. It's work to keep these up to date, and before I attempted to keep them up to date, they weren't up to date, which indicates that they're not really used. These days there are better ways of introspecting anyway. Cc: Theodore Ts'o Reviewed-by: Dominik Brodowski Reviewed-by: Eric Biggers Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman