user/sven/linux.git/mm/memory_hotplug.c, branch v5.10.207

mm/memory_hotplug: use pfn math in place of direct struct page manipulation

2023-11-28T16:54:58Z

commit 1640a0ef80f6d572725f5b0330038c18e98ea168 upstream. When dealing with hugetlb pages, manipulating struct page pointers directly can get to wrong struct page, since struct page is not guaranteed to be contiguous on SPARSEMEM without VMEMMAP. Use pfn calculation to handle it properly. Without the fix, a wrong number of page might be skipped. Since skip cannot be negative, scan_movable_page() will end early and might miss a movable page with -ENOENT. This might fail offline_pages(). No bug is reported. The fix comes from code inspection. Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com Fixes: eeb0efd071d8 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages") Signed-off-by: Zi Yan Reviewed-by: Muchun Song Acked-by: David Hildenbrand Cc: Matthew Wilcox (Oracle) Cc: Mike Kravetz Cc: Mike Rapoport (IBM) Cc: Thomas Bogendoerfer Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: rate limit page migration warnings

2023-10-25T09:54:18Z

commit 786dee864804f8e851cf0f258df2ccbb4ee03d80 upstream. When offlining memory the system can attempt to migrate a lot of pages, if there are problems with migration this can flood the logs. Printing all the data hogs the CPU and cause some RT threads to run for a long time, which may have some bad consequences. Rate limit the page migration warnings in order to avoid this. Link: https://lkml.kernel.org/r/20210505140542.24935-1-georgi.djakov@linaro.org Signed-off-by: Liam Mark Signed-off-by: Georgi Djakov Cc: David Hildenbrand Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: extend offline_and_remove_memory() to handle more than one memory block

2023-06-21T13:45:40Z

commit 8dc4bb58a146655eb057247d7c9d19e73928715b upstream. virtio-mem soon wants to use offline_and_remove_memory() memory that exceeds a single Linux memory block (memory_block_size_bytes()). Let's remove that restriction. Let's remember the old state and try to restore that if anything goes wrong. While re-onlining can, in general, fail, it's highly unlikely to happen (usually only when a notifier fails to allocate memory, and these are rather rare). This will be used by virtio-mem to offline+remove memory ranges that are bigger than a single memory block - for example, with a device block size of 1 GiB (e.g., gigantic pages in the hypervisor) and a Linux memory block size of 128MB. While we could compress the state into 2 bit, using 8 bit is much easier. This handling is similar, but different to acpi_scan_try_to_offline(): a) We don't try to offline twice. I am not sure if this CONFIG_MEMCG optimization is still relevant - it should only apply to ZONE_NORMAL (where we have no guarantees). If relevant, we can always add it. b) acpi_scan_try_to_offline() simply onlines all memory in case something goes wrong. It doesn't restore previous online type. Let's do that, so we won't overwrite what e.g., user space configured. Reviewed-by: Wei Yang Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Pankaj Gupta Cc: Michal Hocko Cc: Oscar Salvador Cc: Wei Yang Cc: Andrew Morton Signed-off-by: David Hildenbrand Link: https://lore.kernel.org/r/20201112133815.13332-28-david@redhat.com Signed-off-by: Michael S. Tsirkin Acked-by: Andrew Morton Signed-off-by: Ma Wupeng Signed-off-by: Greg Kroah-Hartman

mm/migration: return errno when isolate_huge_page failed

2023-02-15T16:22:21Z

[ Upstream commit 7ce82f4c3f3ead13a9d9498768e3b1a79975c4d8 ] We might fail to isolate huge page due to e.g. the page is under migration which cleared HPageMigratable. We should return errno in this case rather than always return 1 which could confuse the user, i.e. the caller might think all of the memory is migrated while the hugetlb page is left behind. We make the prototype of isolate_huge_page consistent with isolate_lru_page as suggested by Huang Ying and rename isolate_huge_page to isolate_hugetlb as suggested by Muchun to improve the readability. Link: https://lkml.kernel.org/r/20220530113016.16663-4-linmiaohe@huawei.com Fixes: e8db67eb0ded ("mm: migrate: move_pages() supports thp migration") Signed-off-by: Miaohe Lin Suggested-by: Huang Ying Reported-by: kernel test robot (build error) Cc: Alistair Popple Cc: Christoph Hellwig Cc: Christoph Lameter Cc: David Hildenbrand Cc: David Howells Cc: Mike Kravetz Cc: Muchun Song Cc: Oscar Salvador Cc: Peter Xu Signed-off-by: Andrew Morton Stable-dep-of: 73bdf65ea748 ("migrate: hugetlb: check for hugetlb shared PMD in node migration") Signed-off-by: Sasha Levin

mm/memory_hotplug: use "unsigned long" for PFN in zone_for_pfn_range()

2021-09-22T10:27:59Z

commit 7cf209ba8a86410939a24cb1aeb279479a7e0ca6 upstream. Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory" These are all cleanups and one fix previously sent as part of [1]: [PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory groups. These patches make sense even without the other series, therefore I pulled them out to make the other series easier to digest. [1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com This patch (of 4): Checkpatch complained on a follow-up patch that we are using "unsigned" here, which defaults to "unsigned int" and checkpatch is correct. As we will search for a fitting zone using the wrong pfn, we might end up onlining memory to one of the special kernel zones, such as ZONE_DMA, which can end badly as the onlined memory does not satisfy properties of these zones. Use "unsigned long" instead, just as we do in other places when handling PFNs. This can bite us once we have physical addresses in the range of multiple TB. Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering") Signed-off-by: David Hildenbrand Reviewed-by: Pankaj Gupta Reviewed-by: Muchun Song Reviewed-by: Oscar Salvador Cc: David Hildenbrand Cc: Vitaly Kuznetsov Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Pankaj Gupta Cc: Wei Yang Cc: Michal Hocko Cc: Dan Williams Cc: Anshuman Khandual Cc: Dave Hansen Cc: Vlastimil Babka Cc: Mike Rapoport Cc: "Rafael J. Wysocki" Cc: Len Brown Cc: Pavel Tatashin Cc: Heiko Carstens Cc: Michael Ellerman Cc: Catalin Marinas Cc: virtualization@lists.linux-foundation.org Cc: Andy Lutomirski Cc: "Aneesh Kumar K.V" Cc: Anton Blanchard Cc: Ard Biesheuvel Cc: Baoquan He Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Christian Borntraeger Cc: Christophe Leroy Cc: Dave Jiang Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Jia He Cc: Joe Perches Cc: Kefeng Wang Cc: Laurent Dufour Cc: Michel Lespinasse Cc: Nathan Lynch Cc: Nicholas Piggin Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Pierre Morel Cc: "Rafael J. Wysocki" Cc: Rich Felker Cc: Scott Cheloha Cc: Sergei Trofimovich Cc: Thiago Jung Bauermann Cc: Thomas Gleixner Cc: Vasily Gorbik Cc: Vishal Verma Cc: Will Deacon Cc: Yoshinori Sato Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: David Hildenbrand Signed-off-by: Greg Kroah-Hartman

arm64: mte: Map hotplugged memory as Normal Tagged

2021-03-17T16:06:28Z

commit d15dfd31384ba3cb93150e5f87661a76fa419f74 upstream. In a system supporting MTE, the linear map must allow reading/writing allocation tags by setting the memory type as Normal Tagged. Currently, this is only handled for memory present at boot. Hotplugged memory uses Normal non-Tagged memory. Introduce pgprot_mhp() for hotplugged memory and use it in add_memory_resource(). The arm64 code maps pgprot_mhp() to pgprot_tagged(). Note that ZONE_DEVICE memory should not be mapped as Tagged and therefore setting the memory type in arch_add_memory() is not feasible. Signed-off-by: Catalin Marinas Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map") Reported-by: Patrick Daly Tested-by: Patrick Daly Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org Cc: # 5.10.x Cc: Will Deacon Cc: Andrew Morton Cc: Vincenzo Frascino Cc: David Hildenbrand Reviewed-by: David Hildenbrand Reviewed-by: Vincenzo Frascino Reviewed-by: Anshuman Khandual Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

mm: memmap defer init doesn't work as expected

2021-01-06T13:56:50Z

commit dc2da7b45ffe954a0090f5d0310ed7b0b37d2bd2 upstream. VMware observed a performance regression during memmap init on their platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") causing it. Before the commit: [0.033176] Normal zone: 1445888 pages used for memmap [0.033176] Normal zone: 89391104 pages, LIFO batch:63 [0.035851] ACPI: PM-Timer IO Port: 0x448 With commit [0.026874] Normal zone: 1445888 pages used for memmap [0.026875] Normal zone: 89391104 pages, LIFO batch:63 [2.028450] ACPI: PM-Timer IO Port: 0x448 The root cause is the current memmap defer init doesn't work as expected. Before, memmap_init_zone() was used to do memmap init of one whole zone, to initialize all low zones of one numa node, but defer memmap init of the last zone in that numa node. However, since commit 73a6e474cb376, function memmap_init() is adapted to iterater over memblock regions inside one zone, then call memmap_init_zone() to do memmap init for each region. E.g, on VMware's system, the memory layout is as below, there are two memory regions in node 2. The current code will mistakenly initialize the whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to iniatialize only one memmory section on the 2nd region [mem 0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's only one memory section's memmap initialized. That's why more time is costed at the time. [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff] [ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff] [ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff] [ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff] Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass down the real zone end pfn so that defer_init() can use it to judge whether defer need be taken in zone wide. Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") Signed-off-by: Baoquan He Reported-by: Rahul Gopakumar Reviewed-by: Mike Rapoport Cc: David Hildenbrand Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/rmap: always do TTU_IGNORE_ACCESS

2020-12-30T10:53:55Z

[ Upstream commit 013339df116c2ee0d796dd8bfb8f293a2030c063 ] Since commit 369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic v2"), the code to check the secondary MMU's page table access bit is broken for !(TTU_IGNORE_ACCESS) because the page is unmapped from the secondary MMU's page table before the check. More specifically for those secondary MMUs which unmap the memory in mmu_notifier_invalidate_range_start() like kvm. However memory reclaim is the only user of !(TTU_IGNORE_ACCESS) or the absence of TTU_IGNORE_ACCESS and it explicitly performs the page table access check before trying to unmap the page. So, at worst the reclaim will miss accesses in a very short window if we remove page table access check in unmapping code. There is an unintented consequence of !(TTU_IGNORE_ACCESS) for the memcg reclaim. From memcg reclaim the page_referenced() only account the accesses from the processes which are in the same memcg of the target page but the unmapping code is considering accesses from all the processes, so, decreasing the effectiveness of memcg reclaim. The simplest solution is to always assume TTU_IGNORE_ACCESS in unmapping code. Link: https://lkml.kernel.org/r/20201104231928.1494083-1-shakeelb@google.com Fixes: 369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic v2") Signed-off-by: Shakeel Butt Acked-by: Johannes Weiner Cc: Hugh Dickins Cc: Jerome Glisse Cc: Vlastimil Babka Cc: Michal Hocko Cc: Andrea Arcangeli Cc: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports

2020-11-22T18:48:22Z

The core-mm has a default __weak implementation of phys_to_target_node() to mirror the weak definition of memory_add_physaddr_to_nid(). That symbol is exported for modules. However, while the export in mm/memory_hotplug.c exported the symbol in the configuration cases of: CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_HOTPLUG=y ...and: CONFIG_NUMA_KEEP_MEMINFO=n CONFIG_MEMORY_HOTPLUG=y ...it failed to export the symbol in the case of: CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_HOTPLUG=n Not only is that broken, but Christoph points out that the kernel should not be exporting any __weak symbol, which means that memory_add_physaddr_to_nid() example that phys_to_target_node() copied is broken too. Rework the definition of phys_to_target_node() and memory_add_physaddr_to_nid() to not require weak symbols. Move to the common arch override design-pattern of an asm header defining a symbol to replace the default implementation. The only common header that all memory_add_physaddr_to_nid() producing architectures implement is asm/sparsemem.h. In fact, powerpc already defines its memory_add_physaddr_to_nid() helper in sparsemem.h. Double-down on that observation and define phys_to_target_node() where necessary in asm/sparsemem.h. An alternate consideration that was discarded was to put this override in asm/numa.h, but that entangles with the definition of MAX_NUMNODES relative to the inclusion of linux/nodemask.h, and requires powerpc to grow a new header. The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid now that the symbol is properly exported / stubbed in all combinations of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG. [dan.j.williams@intel.com: v4] Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com [dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning] Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: a035b6bf863e ("mm/memory_hotplug: introduce default phys_to_target_node() implementation") Reported-by: Randy Dunlap Reported-by: Thomas Gleixner Reported-by: kernel test robot Reported-by: Christoph Hellwig Signed-off-by: Dan Williams Signed-off-by: Andrew Morton Tested-by: Randy Dunlap Tested-by: Thomas Gleixner Reviewed-by: Thomas Gleixner Reviewed-by: Christoph Hellwig Cc: Joao Martins Cc: Tony Luck Cc: Fenghua Yu Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Vishal Verma Cc: Stephen Rothwell Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds

mm/memory_hotplug: remove a wrapper for alloc_migration_target()

2020-10-18T16:27:09Z

To calculate the correct node to migrate the page for hotplug, we need to check node id of the page. Wrapper for alloc_migration_target() exists for this purpose. However, Vlastimil informs that all migration source pages come from a single node. In this case, we don't need to check the node id for each page and we don't need to re-set the target nodemask for each page by using the wrapper. Set up the migration_target_control once and use it for all pages. Signed-off-by: Joonsoo Kim Signed-off-by: Andrew Morton Acked-by: Vlastimil Babka Acked-by: Michal Hocko Cc: Christoph Hellwig Cc: Mike Kravetz Cc: Naoya Horiguchi Cc: Roman Gushchin Link: http://lkml.kernel.org/r/1594622517-20681-10-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds