user/sven/linux.git/mm, branch v5.17.3

mm/mempolicy: fix mpol_new leak in shared_policy_replace

2022-04-13T17:27:36Z

commit 4ad099559b00ac01c3726e5c95dc3108ef47d03e upstream. If mpol_new is allocated but not used in restart loop, mpol_new will be freed via mpol_put before returning to the caller. But refcnt is not initialized yet, so mpol_put could not do the right things and might leak the unused mpol_new. This would happen if mempolicy was updated on the shared shmem file while the sp->lock has been dropped during the memory allocation. This issue could be triggered easily with the below code snippet if there are many processes doing the below work at the same time: shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT); shm = shmat(shmid, 0, 0); loop many times { mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0); mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask, maxnode, 0); } Link: https://lkml.kernel.org/r/20220329111416.27954-1-linmiaohe@huawei.com Fixes: 42288fe366c4 ("mm: mempolicy: Convert shared_policy mutex to spinlock") Signed-off-by: Miaohe Lin Acked-by: Michal Hocko Cc: KOSAKI Motohiro Cc: Mel Gorman Cc: [3.8] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)

2022-04-13T17:27:35Z

commit 01e67e04c28170c47700c2c226d732bbfedb1ad0 upstream. If an mremap() syscall with old_size=0 ends up in move_page_tables(), it will call invalidate_range_start()/invalidate_range_end() unnecessarily, i.e. with an empty range. This causes a WARN in KVM's mmu_notifier. In the past, empty ranges have been diagnosed to be off-by-one bugs, hence the WARNing. Given the low (so far) number of unique reports, the benefits of detecting more buggy callers seem to outweigh the cost of having to fix cases such as this one, where userspace is doing something silly. In this particular case, an early return from move_page_tables() is enough to fix the issue. Link: https://lkml.kernel.org/r/20220329173155.172439-1-pbonzini@redhat.com Reported-by: syzbot+6bde52d89cfdf9f61425@syzkaller.appspotmail.com Signed-off-by: Paolo Bonzini Cc: Sean Christopherson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

highmem: fix checks in __kmap_local_sched_{in,out}

2022-04-13T17:27:35Z

commit 66f133ceab7456c789f70a242991ed1b27ba1c3d upstream. When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are initialized with 0 value, but the check is done with pte_none. 0 pte however does not necessarily mean that pte_none will return true. e.g. on xtensa it returns false, resulting in the following runtime warnings: WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_out+0x51/0x108 __schedule+0x71a/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0 CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_in+0x50/0xe0 finish_task_switch$isra$0+0x1ce/0x2f8 __schedule+0x86e/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com Fixes: 5fbda3ecd14a ("sched: highmem: Store local kmaps in task struct") Signed-off-by: Max Filippov Reviewed-by: Thomas Gleixner Cc: "Peter Zijlstra (Intel)" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm: fix race between MADV_FREE reclaim and blkdev direct IO read

2022-04-13T17:27:27Z

commit 6c8e2a256915a223f6289f651d6b926cd7135c9e upstream. Problem: ======= Userspace might read the zero-page instead of actual data from a direct IO read on a block device if the buffers have been called madvise(MADV_FREE) on earlier (this is discussed below) due to a race between page reclaim on MADV_FREE and blkdev direct IO read. - Race condition: ============== During page reclaim, the MADV_FREE page check in try_to_unmap_one() checks if the page is not dirty, then discards its rmap PTE(s) (vs. remap back if the page is dirty). However, after try_to_unmap_one() returns to shrink_page_list(), it might keep the page _anyway_ if page_ref_freeze() fails (it expects exactly _one_ page reference, from the isolation for page reclaim). Well, blkdev_direct_IO() gets references for all pages, and on READ operations it only sets them dirty _later_. So, if MADV_FREE'd pages (i.e., not dirty) are used as buffers for direct IO read from block devices, and page reclaim happens during __blkdev_direct_IO[_simple]() exactly AFTER bio_iov_iter_get_pages() returns, but BEFORE the pages are set dirty, the situation happens. The direct IO read eventually completes. Now, when userspace reads the buffers, the PTE is no longer there and the page fault handler do_anonymous_page() services that with the zero-page, NOT the data! A synthetic reproducer is provided. - Page faults: =========== If page reclaim happens BEFORE bio_iov_iter_get_pages() the issue doesn't happen, because that faults-in all pages as writeable, so do_anonymous_page() sets up a new page/rmap/PTE, and that is used by direct IO. The userspace reads don't fault as the PTE is there (thus zero-page is not used/setup). But if page reclaim happens AFTER it / BEFORE setting pages dirty, the PTE is no longer there; the subsequent page faults can't help: The data-read from the block device probably won't generate faults due to DMA (no MMU) but even in the case it wouldn't use DMA, that happens on different virtual addresses (not user-mapped addresses) because `struct bio_vec` stores `struct page` to figure addresses out (which are different from user-mapped addresses) for the read. Thus userspace reads (to user-mapped addresses) still fault, then do_anonymous_page() gets another `struct page` that would address/ map to other memory than the `struct page` used by `struct bio_vec` for the read. (The original `struct page` is not available, since it wasn't freed, as page_ref_freeze() failed due to more page refs. And even if it were available, its data cannot be trusted anymore.) Solution: ======== One solution is to check for the expected page reference count in try_to_unmap_one(). There should be one reference from the isolation (that is also checked in shrink_page_list() with page_ref_freeze()) plus one or more references from page mapping(s) (put in discard: label). Further references mean that rmap/PTE cannot be unmapped/nuked. (Note: there might be more than one reference from mapping due to fork()/clone() without CLONE_VM, which use the same `struct page` for references, until the copy-on-write page gets copied.) So, additional page references (e.g., from direct IO read) now prevent the rmap/PTE from being unmapped/dropped; similarly to the page is not freed per shrink_page_list()/page_ref_freeze()). - Races and Barriers: ================== The new check in try_to_unmap_one() should be safe in races with bio_iov_iter_get_pages() in get_user_pages() fast and slow paths, as it's done under the PTE lock. The fast path doesn't take the lock, but it checks if the PTE has changed and if so, it drops the reference and leaves the page for the slow path (which does take that lock). The fast path requires synchronization w/ full memory barrier: it writes the page reference count first then it reads the PTE later, while try_to_unmap() writes PTE first then it reads page refcount. And a second barrier is needed, as the page dirty flag should not be read before the page reference count (as in __remove_mapping()). (This can be a load memory barrier only; no writes are involved.) Call stack/comments: - try_to_unmap_one() - page_vma_mapped_walk() - map_pte() # see pte_offset_map_lock(): pte_offset_map() spin_lock() - ptep_get_and_clear() # write PTE - smp_mb() # (new barrier) GUP fast path - page_ref_count() # (new check) read refcount - page_vma_mapped_walk_done() # see pte_unmap_unlock(): pte_unmap() spin_unlock() - bio_iov_iter_get_pages() - __bio_iov_iter_get_pages() - iov_iter_get_pages() - get_user_pages_fast() - internal_get_user_pages_fast() # fast path - lockless_pages_from_mm() - gup_{pgd,p4d,pud,pmd,pte}_range() ptep = pte_offset_map() # not _lock() pte = ptep_get_lockless(ptep) page = pte_page(pte) try_grab_compound_head(page) # inc refcount # (RMW/barrier # on success) if (pte_val(pte) != pte_val(*ptep)) # read PTE put_compound_head(page) # dec refcount # go slow path # slow path - __gup_longterm_unlocked() - get_user_pages_unlocked() - __get_user_pages_locked() - __get_user_pages() - follow_{page,p4d,pud,pmd}_mask() - follow_page_pte() ptep = pte_offset_map_lock() pte = *ptep page = vm_normal_page(pte) try_grab_page(page) # inc refcount pte_unmap_unlock() - Huge Pages: ========== Regarding transparent hugepages, that logic shouldn't change, as MADV_FREE (aka lazyfree) pages are PageAnon() && !PageSwapBacked() (madvise_free_pte_range() -> mark_page_lazyfree() -> lru_lazyfree_fn()) thus should reach shrink_page_list() -> split_huge_page_to_list() before try_to_unmap[_one](), so it deals with normal pages only. (And in case unlikely/TTU_SPLIT_HUGE_PMD/split_huge_pmd_address() happens, which should not or be rare, the page refcount should be greater than mapcount: the head page is referenced by tail pages. That also prevents checking the head `page` then incorrectly call page_remove_rmap(subpage) for a tail page, that isn't even in the shrink_page_list()'s page_list (an effect of split huge pmd/pmvw), as it might happen today in this unlikely scenario.) MADV_FREE'd buffers: =================== So, back to the "if MADV_FREE pages are used as buffers" note. The case is arguable, and subject to multiple interpretations. The madvise(2) manual page on the MADV_FREE advice value says: 1) 'After a successful MADV_FREE ... data will be lost when the kernel frees the pages.' 2) 'the free operation will be canceled if the caller writes into the page' / 'subsequent writes ... will succeed and then [the] kernel cannot free those dirtied pages' 3) 'If there is no subsequent write, the kernel can free the pages at any time.' Thoughts, questions, considerations... respectively: 1) Since the kernel didn't actually free the page (page_ref_freeze() failed), should the data not have been lost? (on userspace read.) 2) Should writes performed by the direct IO read be able to cancel the free operation? - Should the direct IO read be considered as 'the caller' too, as it's been requested by 'the caller'? - Should the bio technique to dirty pages on return to userspace (bio_check_pages_dirty() is called/used by __blkdev_direct_IO()) be considered in another/special way here? 3) Should an upcoming write from a previously requested direct IO read be considered as a subsequent write, so the kernel should not free the pages? (as it's known at the time of page reclaim.) And lastly: Technically, the last point would seem a reasonable consideration and balance, as the madvise(2) manual page apparently (and fairly) seem to assume that 'writes' are memory access from the userspace process (not explicitly considering writes from the kernel or its corner cases; again, fairly).. plus the kernel fix implementation for the corner case of the largely 'non-atomic write' encompassed by a direct IO read operation, is relatively simple; and it helps. Reproducer: ========== @ test.c (simplified, but works) #define _GNU_SOURCE #include #include #include #include int main() { int fd, i; char *buf; fd = open(DEV, O_RDONLY | O_DIRECT); buf = mmap(NULL, BUF_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); for (i = 0; i < BUF_SIZE; i += PAGE_SIZE) buf[i] = 1; // init to non-zero madvise(buf, BUF_SIZE, MADV_FREE); read(fd, buf, BUF_SIZE); for (i = 0; i < BUF_SIZE; i += PAGE_SIZE) printf("%p: 0x%x\n", &buf[i], buf[i]); return 0; } @ block/fops.c (formerly fs/block_dev.c) +#include ... ... __blkdev_direct_IO[_simple](...) { ... + if (!strcmp(current->comm, "good")) + shrink_all_memory(ULONG_MAX); + ret = bio_iov_iter_get_pages(...); + + if (!strcmp(current->comm, "bad")) + shrink_all_memory(ULONG_MAX); ... } @ shell # NUM_PAGES=4 # PAGE_SIZE=$(getconf PAGE_SIZE) # yes | dd of=test.img bs=${PAGE_SIZE} count=${NUM_PAGES} # DEV=$(losetup -f --show test.img) # gcc -DDEV=\"$DEV\" \ -DBUF_SIZE=$((PAGE_SIZE * NUM_PAGES)) \ -DPAGE_SIZE=${PAGE_SIZE} \ test.c -o test # od -tx1 $DEV 0000000 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a * 0040000 # mv test good # ./good 0x7f7c10418000: 0x79 0x7f7c10419000: 0x79 0x7f7c1041a000: 0x79 0x7f7c1041b000: 0x79 # mv good bad # ./bad 0x7fa1b8050000: 0x0 0x7fa1b8051000: 0x0 0x7fa1b8052000: 0x0 0x7fa1b8053000: 0x0 Note: the issue is consistent on v5.17-rc3, but it's intermittent with the support of MADV_FREE on v4.5 (60%-70% error; needs swap). [wrap do_direct_IO() in do_blockdev_direct_IO() @ fs/direct-io.c]. - v5.17-rc3: # for i in {1..1000}; do ./good; done \ | cut -d: -f2 | sort | uniq -c 4000 0x79 # mv good bad # for i in {1..1000}; do ./bad; done \ | cut -d: -f2 | sort | uniq -c 4000 0x0 # free | grep Swap Swap: 0 0 0 - v4.5: # for i in {1..1000}; do ./good; done \ | cut -d: -f2 | sort | uniq -c 4000 0x79 # mv good bad # for i in {1..1000}; do ./bad; done \ | cut -d: -f2 | sort | uniq -c 2702 0x0 1298 0x79 # swapoff -av swapoff /swap # for i in {1..1000}; do ./bad; done \ | cut -d: -f2 | sort | uniq -c 4000 0x79 Ceph/TCMalloc: ============= For documentation purposes, the use case driving the analysis/fix is Ceph on Ubuntu 18.04, as the TCMalloc library there still uses MADV_FREE to release unused memory to the system from the mmap'ed page heap (might be committed back/used again; it's not munmap'ed.) - PageHeap::DecommitSpan() -> TCMalloc_SystemRelease() -> madvise() - PageHeap::CommitSpan() -> TCMalloc_SystemCommit() -> do nothing. Note: TCMalloc switched back to MADV_DONTNEED a few commits after the release in Ubuntu 18.04 (google-perftools/gperftools 2.5), so the issue just 'disappeared' on Ceph on later Ubuntu releases but is still present in the kernel, and can be hit by other use cases. The observed issue seems to be the old Ceph bug #22464 [1], where checksum mismatches are observed (and instrumentation with buffer dumps shows zero-pages read from mmap'ed/MADV_FREE'd page ranges). The issue in Ceph was reasonably deemed a kernel bug (comment #50) and mostly worked around with a retry mechanism, but other parts of Ceph could still hit that (rocksdb). Anyway, it's less likely to be hit again as TCMalloc switched out of MADV_FREE by default. (Some kernel versions/reports from the Ceph bug, and relation with the MADV_FREE introduction/changes; TCMalloc versions not checked.) - 4.4 good - 4.5 (madv_free: introduction) - 4.9 bad - 4.10 good? maybe a swapless system - 4.12 (madv_free: no longer free instantly on swapless systems) - 4.13 bad [1] https://tracker.ceph.com/issues/22464 Thanks: ====== Several people contributed to analysis/discussions/tests/reproducers in the first stages when drilling down on ceph/tcmalloc/linux kernel: - Dan Hill - Dan Streetman - Dongdong Tao - Gavin Guo - Gerald Yang - Heitor Alves de Siqueira - Ioanna Alifieraki - Jay Vosburgh - Matthew Ruffell - Ponnuvel Palaniyappan Reviews, suggestions, corrections, comments: - Minchan Kim - Yu Zhao - Huang, Ying - John Hubbard - Christoph Hellwig [mfo@canonical.com: v4] Link: https://lkml.kernel.org/r/20220209202659.183418-1-mfo@canonical.comLink: https://lkml.kernel.org/r/20220131230255.789059-1-mfo@canonical.com Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages") Signed-off-by: Mauricio Faria de Oliveira Reviewed-by: "Huang, Ying" Cc: Minchan Kim Cc: Yu Zhao Cc: Yang Shi Cc: Miaohe Lin Cc: Dan Hill Cc: Dan Streetman Cc: Dongdong Tao Cc: Gavin Guo Cc: Gerald Yang Cc: Heitor Alves de Siqueira Cc: Ioanna Alifieraki Cc: Jay Vosburgh Cc: Matthew Ruffell Cc: Ponnuvel Palaniyappan Cc: Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds [mfo: backport: replace folio/test_flag with page/flag equivalents; real Fixes: 854e9ed09ded ("mm: support madvise(MADV_FREE)") in v4.] Signed-off-by: Mauricio Faria de Oliveira Signed-off-by: Sasha Levin

mm: kfence: fix objcgs vector allocation

2022-04-13T17:27:07Z

[ Upstream commit 8f0b36497303487d5a32c75789c77859cc2ee895 ] If the kfence object is allocated to be used for objects vector, then this slot of the pool eventually being occupied permanently since the vector is never freed. The solutions could be (1) freeing vector when the kfence object is freed or (2) allocating all vectors statically. Since the memory consumption of object vectors is low, it is better to chose (2) to fix the issue and it is also can reduce overhead of vectors allocating in the future. Link: https://lkml.kernel.org/r/20220328132843.16624-1-songmuchun@bytedance.com Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB") Signed-off-by: Muchun Song Reviewed-by: Marco Elver Reviewed-by: Roman Gushchin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: Xiongchun Duan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

mm/usercopy: return 1 from hardened_usercopy __setup() handler

2022-04-08T11:59:00Z

commit 05fe3c103f7e6b8b4fca8a7001dfc9ed4628085b upstream. __setup() handlers should return 1 if the command line option is handled and 0 if not (or maybe never return 0; it just pollutes init's environment). This prevents: Unknown kernel command line parameters \ "BOOT_IMAGE=/boot/bzImage-517rc5 hardened_usercopy=off", will be \ passed to user space. Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc5 hardened_usercopy=off or hardened_usercopy=on but when "hardened_usercopy=foo" is used, there is no Unknown kernel command line parameter. Return 1 to indicate that the boot option has been handled. Print a warning if strtobool() returns an error on the option string, but do not mark this as in unknown command line option and do not cause init's environment to be polluted with this string. Link: https://lkml.kernel.org/r/20220222034249.14795-1-rdunlap@infradead.org Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: b5cb15d9372ab ("usercopy: Allow boot cmdline disabling of hardening") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Acked-by: Chris von Recklinghausen Cc: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/memcontrol: return 1 from cgroup.memory __setup() handler

2022-04-08T11:59:00Z

commit 460a79e18842caca6fa0c415de4a3ac1e671ac50 upstream. __setup() handlers should return 1 if the command line option is handled and 0 if not (or maybe never return 0; it just pollutes init's environment). The only reason that this particular __setup handler does not pollute init's environment is that the setup string contains a '.', as in "cgroup.memory". This causes init/main.c::unknown_boottoption() to consider it to be an "Unused module parameter" and ignore it. (This is for parsing of loadable module parameters any time after kernel init.) Otherwise the string "cgroup.memory=whatever" would be added to init's environment strings. Instead of relying on this '.' quirk, just return 1 to indicate that the boot option has been handled. Note that there is no warning message if someone enters: cgroup.memory=anything_invalid Link: https://lkml.kernel.org/r/20220222005811.10672-1-rdunlap@infradead.org Fixes: f7e1cb6ec51b0 ("mm: memcontrol: account socket memory in unified hierarchy memory controller") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: Michal Koutný Cc: Johannes Weiner Cc: Michal Hocko Cc: Vladimir Davydov Cc: Roman Gushchin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/mmap: return 1 from stack_guard_gap __setup() handler

2022-04-08T11:59:00Z

commit e6d094936988910ce6e8197570f2753898830081 upstream. __setup() handlers should return 1 if the command line option is handled and 0 if not (or maybe never return 0; it just pollutes init's environment). This prevents: Unknown kernel command line parameters \ "BOOT_IMAGE=/boot/bzImage-517rc5 stack_guard_gap=100", will be \ passed to user space. Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc5 stack_guard_gap=100 Return 1 to indicate that the boot option has been handled. Note that there is no warning message if someone enters: stack_guard_gap=anything_invalid and 'val' and stack_guard_gap are both set to 0 due to the use of simple_strtoul(). This could be improved by using kstrtoxxx() and checking for an error. It appears that having stack_guard_gap == 0 is valid (if unexpected) since using "stack_guard_gap=0" on the kernel command line does that. Link: https://lkml.kernel.org/r/20220222005817.11087-1-rdunlap@infradead.org Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1be7107fbe18e ("mm: larger stack guard gap, between vmas") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/kmemleak: reset tag when compare object pointer

2022-04-08T11:57:23Z

commit bfc8089f00fa526dea983844c880fa8106c33ac4 upstream. When we use HW-tag based kasan and enable vmalloc support, we hit the following bug. It is due to comparison between tagged object and non-tagged pointer. We need to reset the kasan tag when we need to compare tagged object and non-tagged pointer. kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440 CPU: 4 PID: 1 Comm: init Tainted: G S W 5.15.25-android13-0-g5cacf919c2bc #1 Hardware name: MT6983(ENG) (DT) Call trace: add_scan_area+0xc4/0x244 kmemleak_scan_area+0x40/0x9c layout_and_allocate+0x1e8/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768): kmemleak: [name:kmemleak&] comm "init", pid 1, jiffies 4294894197 kmemleak: [name:kmemleak&] min_count = 0 kmemleak: [name:kmemleak&] count = 0 kmemleak: [name:kmemleak&] flags = 0x1 kmemleak: [name:kmemleak&] checksum = 0 kmemleak: [name:kmemleak&] backtrace: module_alloc+0x9c/0x120 move_module+0x34/0x19c layout_and_allocate+0x1c4/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Link: https://lkml.kernel.org/r/20220318034051.30687-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee Reviewed-by: Catalin Marinas Cc: Matthias Brugger Cc: Chinwen Chang Cc: Nicholas Tang Cc: Yee Lee Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm: only re-generate demotion targets when a numa node changes its N_CPU state

2022-04-08T11:57:23Z

commit 734c15700cdf9062ae98d8b131c6fe873dfad26d upstream. Abhishek reported that after patch [1], hotplug operations are taking roughly double the expected time. [2] The reason behind is that the CPU callbacks that migrate_on_reclaim_init() sets always call set_migration_target_nodes() whenever a CPU is brought up/down. But we only care about numa nodes going from having cpus to become cpuless, and vice versa, as that influences the demotion_target order. We do already have two CPU callbacks (vmstat_cpu_online() and vmstat_cpu_dead()) that check exactly that, so get rid of the CPU callbacks in migrate_on_reclaim_init() and only call set_migration_target_nodes() from vmstat_cpu_{dead,online}() whenever a numa node change its N_CPU state. [1] https://lore.kernel.org/linux-mm/20210721063926.3024591-2-ying.huang@intel.com/ [2] https://lore.kernel.org/linux-mm/eb438ddd-2919-73d4-bd9f-b7eecdd9577a@linux.vnet.ibm.com/ [osalvador@suse.de: add feedback from Huang Ying] Link: https://lkml.kernel.org/r/20220314150945.12694-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20220310120749.23077-1-osalvador@suse.de Fixes: 884a6e5d1f93b ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: Oscar Salvador Reviewed-by: Baolin Wang Tested-by: Baolin Wang Reported-by: Abhishek Goel Cc: Dave Hansen Cc: "Huang, Ying" Cc: Abhishek Goel Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman