user/sven/linux.git/mm, branch v5.5.5

mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush

2020-02-11T12:37:14Z

commit 0ed1325967ab5f7a4549a2641c6ebe115f76e228 upstream. Architectures for which we have hardware walkers of Linux page table should flush TLB on mmu gather batch allocation failures and batch flush. Some architectures like POWER supports multiple translation modes (hash and radix) and in the case of POWER only radix translation mode needs the above TLBI. This is because for hash translation mode kernel wants to avoid this extra flush since there are no hardware walkers of linux page table. With radix translation, the hardware also walks linux page table and with that, kernel needs to make sure to TLB invalidate page walk cache before page table pages are freed. More details in commit d86564a2f085 ("mm/tlb, x86/mm: Support invalidating TLB caches for RCU_TABLE_FREE") The changes to sparc are to make sure we keep the old behavior since we are now removing HAVE_RCU_TABLE_NO_INVALIDATE. The default value for tlb_needs_table_invalidate is to always force an invalidate and sparc can avoid the table invalidate. Hence we define tlb_needs_table_invalidate to false for sparc architecture. Link: http://lkml.kernel.org/r/20200116064531.483522-3-aneesh.kumar@linux.ibm.com Fixes: a46cc7a90fd8 ("powerpc/mm/radix: Improve TLB/PWC flushes") Signed-off-by: Peter Zijlstra (Intel) Acked-by: Michael Ellerman [powerpc] Cc: [4.14+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section

2020-02-11T12:37:13Z

commit e822969cab48b786b64246aad1a3ba2a774f5d23 upstream. Patch series "mm: fix max_pfn not falling on section boundary", v2. Playing with different memory sizes for a x86-64 guest, I discovered that some memmaps (highest section if max_mem does not fall on the section boundary) are marked as being valid and online, but contain garbage. We have to properly initialize these memmaps. Looking at /proc/kpageflags and friends, I found some more issues, partially related to this. This patch (of 3): If max_pfn is not aligned to a section boundary, we can easily run into BUGs. This can e.g., be triggered on x86-64 under QEMU by specifying a memory size that is not a multiple of 128MB (e.g., 4097MB, but also 4160MB). I was told that on real HW, we can easily have this scenario (esp., one of the main reasons sub-section hotadd of devmem was added). The issue is, that we have a valid memmap (pfn_valid()) for the whole section, and the whole section will be marked "online". pfn_to_online_page() will succeed, but the memmap contains garbage. E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m 4160M" - (see tools/vm/page-types.c): [ 200.476376] BUG: unable to handle page fault for address: fffffffffffffffe [ 200.477500] #PF: supervisor read access in kernel mode [ 200.478334] #PF: error_code(0x0000) - not-present page [ 200.479076] PGD 59614067 P4D 59614067 PUD 59616067 PMD 0 [ 200.479557] Oops: 0000 [#4] SMP NOPTI [ 200.479875] CPU: 0 PID: 603 Comm: page-types Tainted: G D W 5.5.0-rc1-next-20191209 #93 [ 200.480646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4 [ 200.481648] RIP: 0010:stable_page_flags+0x4d/0x410 [ 200.482061] Code: f3 ff 41 89 c0 48 b8 00 00 00 00 01 00 00 00 45 84 c0 0f 85 cd 02 00 00 48 8b 53 08 48 8b 2b 48f [ 200.483644] RSP: 0018:ffffb139401cbe60 EFLAGS: 00010202 [ 200.484091] RAX: fffffffffffffffe RBX: fffffbeec5100040 RCX: 0000000000000000 [ 200.484697] RDX: 0000000000000001 RSI: ffffffff9535c7cd RDI: 0000000000000246 [ 200.485313] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000 [ 200.485917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000144001 [ 200.486523] R13: 00007ffd6ba55f48 R14: 00007ffd6ba55f40 R15: ffffb139401cbf08 [ 200.487130] FS: 00007f68df717580(0000) GS:ffff9ec77fa00000(0000) knlGS:0000000000000000 [ 200.487804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.488295] CR2: fffffffffffffffe CR3: 0000000135d48000 CR4: 00000000000006f0 [ 200.488897] Call Trace: [ 200.489115] kpageflags_read+0xe9/0x140 [ 200.489447] proc_reg_read+0x3c/0x60 [ 200.489755] vfs_read+0xc2/0x170 [ 200.490037] ksys_pread64+0x65/0xa0 [ 200.490352] do_syscall_64+0x5c/0xa0 [ 200.490665] entry_SYSCALL_64_after_hwframe+0x49/0xbe But it can be triggered much easier via "cat /proc/kpageflags > /dev/null" after cold/hot plugging a DIMM to such a system: [root@localhost ~]# cat /proc/kpageflags > /dev/null [ 111.517275] BUG: unable to handle page fault for address: fffffffffffffffe [ 111.517907] #PF: supervisor read access in kernel mode [ 111.518333] #PF: error_code(0x0000) - not-present page [ 111.518771] PGD a240e067 P4D a240e067 PUD a2410067 PMD 0 This patch fixes that by at least zero-ing out that memmap (so e.g., page_to_pfn() will not crash). Commit 907ec5fca3dc ("mm: zero remaining unavailable struct pages") tried to fix a similar issue, but forgot to consider this special case. After this patch, there are still problems to solve. E.g., not all of these pages falling into a memory hole will actually get initialized later and set PageReserved - they are only zeroed out - but at least the immediate crashes are gone. A follow-up patch will take care of this. Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: David Hildenbrand Tested-by: Daniel Jordan Cc: Naoya Horiguchi Cc: Pavel Tatashin Cc: Andrew Morton Cc: Steven Sistare Cc: Michal Hocko Cc: Daniel Jordan Cc: Bob Picco Cc: Oscar Salvador Cc: Alexey Dobriyan Cc: Dan Williams Cc: Michal Hocko Cc: Stephen Rothwell Cc: [4.15+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm: move_pages: report the number of non-attempted pages

2020-02-11T12:36:44Z

commit 5984fabb6e82d9ab4e6305cb99694c85d46de8ae upstream. Since commit a49bd4d71637 ("mm, numa: rework do_pages_move"), the semantic of move_pages() has changed to return the number of non-migrated pages if they were result of a non-fatal reasons (usually a busy page). This was an unintentional change that hasn't been noticed except for LTP tests which checked for the documented behavior. There are two ways to go around this change. We can even get back to the original behavior and return -EAGAIN whenever migrate_pages is not able to migrate pages due to non-fatal reasons. Another option would be to simply continue with the changed semantic and extend move_pages documentation to clarify that -errno is returned on an invalid input or when migration simply cannot succeed (e.g. -ENOMEM, -EBUSY) or the number of pages that couldn't have been migrated due to ephemeral reasons (e.g. page is pinned or locked for other reasons). This patch implements the second option because this behavior is in place for some time without anybody complaining and possibly new users depending on it. Also it allows to have a slightly easier error handling as the caller knows that it is worth to retry when err > 0. But since the new semantic would be aborted immediately if migration is failed due to ephemeral reasons, need include the number of non-attempted pages in the return value too. Link: http://lkml.kernel.org/r/1580160527-109104-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move") Signed-off-by: Yang Shi Suggested-by: Michal Hocko Acked-by: Michal Hocko Reviewed-by: Wei Yang Cc: [4.17+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm: thp: don't need care deferred split queue in memcg charge move path

2020-02-11T12:36:44Z

commit fac0516b5534897bf4c4a88daa06a8cfa5611b23 upstream. If compound is true, this means it is a PMD mapped THP. Which implies the page is not linked to any defer list. So the first code chunk will not be executed. Also with this reason, it would not be proper to add this page to a defer list. So the second code chunk is not correct. Based on this, we should remove the defer list related code. [yang.shi@linux.alibaba.com: better patch title] Link: http://lkml.kernel.org/r/20200117233836.3434-1-richardw.yang@linux.intel.com Fixes: 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware") Signed-off-by: Wei Yang Suggested-by: Kirill A. Shutemov Acked-by: Yang Shi Cc: David Rientjes Cc: Michal Hocko Cc: Kirill A. Shutemov Cc: Johannes Weiner Cc: Vladimir Davydov Cc: [5.4+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: fix remove_memory() lockdep splat

2020-02-11T12:36:44Z

commit f1037ec0cc8ac1a450974ad9754e991f72884f48 upstream. The daxctl unit test for the dax_kmem driver currently triggers the (false positive) lockdep splat below. It results from the fact that remove_memory_block_devices() is invoked under the mem_hotplug_lock() causing lockdep entanglements with cpu_hotplug_lock() and sysfs (kernfs active state tracking). It is a false positive because the sysfs attribute path triggering the memory remove is not the same attribute path associated with memory-block device. sysfs_break_active_protection() is not applicable since there is no real deadlock conflict, instead move memory-block device removal outside the lock. The mem_hotplug_lock() is not needed to synchronize the memory-block device removal vs the page online state, that is already handled by lock_device_hotplug(). Specifically, lock_device_hotplug() is sufficient to allow try_remove_memory() to check the offline state of the memblocks and be assured that any in progress online attempts are flushed / blocked by kernfs_drain() / attribute removal. The add_memory() path safely creates memblock devices under the mem_hotplug_lock(). There is no kernfs active state synchronization in the memblock device_register() path, so nothing to fix there. This change is only possible thanks to the recent change that refactored memory block device removal out of arch_remove_memory() (commit 4c4b7f9ba948 "mm/memory_hotplug: remove memory block devices before arch_remove_memory()"), and David's due diligence tracking down the guarantees afforded by kernfs_drain(). Not flagged for -stable since this only impacts ongoing development and lockdep validation, not a runtime issue. ====================================================== WARNING: possible circular locking dependency detected 5.5.0-rc3+ #230 Tainted: G OE ------------------------------------------------------ lt-daxctl/6459 is trying to acquire lock: ffff99c7f0003510 (kn->count#241){++++}, at: kernfs_remove_by_name_ns+0x41/0x80 but task is already holding lock: ffffffffa76a5450 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x20/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (mem_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 get_online_mems+0x3e/0xb0 kmem_cache_create_usercopy+0x2e/0x260 kmem_cache_create+0x12/0x20 ptlock_cache_init+0x20/0x28 start_kernel+0x243/0x547 secondary_startup_64+0xb6/0xc0 -> #1 (cpu_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 cpus_read_lock+0x3e/0xb0 online_pages+0x37/0x300 memory_subsys_online+0x17d/0x1c0 device_online+0x60/0x80 state_store+0x65/0xd0 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#241){++++}: check_prev_add+0x98/0xa40 validate_chain+0x576/0x860 __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 __kernfs_remove+0x25f/0x2e0 kernfs_remove_by_name_ns+0x41/0x80 remove_files.isra.0+0x30/0x70 sysfs_remove_group+0x3d/0x80 sysfs_remove_groups+0x29/0x40 device_remove_attrs+0x39/0x70 device_del+0x16a/0x3f0 device_unregister+0x16/0x60 remove_memory_block_devices+0x82/0xb0 try_remove_memory+0xb5/0x130 remove_memory+0x26/0x40 dev_dax_kmem_remove+0x44/0x6a [kmem] device_release_driver_internal+0xe4/0x1c0 unbind_store+0xef/0x120 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: kn->count#241 --> cpu_hotplug_lock.rw_sem --> mem_hotplug_lock.rw_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mem_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); lock(mem_hotplug_lock.rw_sem); lock(kn->count#241); *** DEADLOCK *** No fixes tag as this has been a long standing issue that predated the addition of kernfs lockdep annotations. Link: http://lkml.kernel.org/r/157991441887.2763922.4770790047389427325.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams Acked-by: Michal Hocko Reviewed-by: David Hildenbrand Cc: Vishal Verma Cc: Pavel Tatashin Cc: Dave Hansen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/migrate.c: also overwrite error when it is bigger than zero

2020-02-11T12:36:43Z

commit dfe9aa23cab7880a794db9eb2d176c00ed064eb6 upstream. If we get here after successfully adding page to list, err would be 1 to indicate the page is queued in the list. Current code has two problems: * on success, 0 is not returned * on error, if add_page_for_migratioin() return 1, and the following err1 from do_move_pages_to_node() is set, the err1 is not returned since err is 1 And these behaviors break the user interface. Link: http://lkml.kernel.org/r/20200119065753.21694-1-richardw.yang@linux.intel.com Fixes: e0153fc2c760 ("mm: move_pages: return valid node id in status if the page is already on the target node"). Signed-off-by: Wei Yang Acked-by: Yang Shi Cc: John Hubbard Cc: Vlastimil Babka Cc: Christoph Lameter Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/sparse.c: reset section's mem_map when fully deactivated

2020-02-11T12:36:43Z

commit 1f503443e7df8dc8366608b4d810ce2d6669827c upstream. After commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug"), when a mem section is fully deactivated, section_mem_map still records the section's start pfn, which is not used any more and will be reassigned during re-addition. In analogy with alloc/free pattern, it is better to clear all fields of section_mem_map. Beside this, it breaks the user space tool "makedumpfile" [1], which makes assumption that a hot-removed section has mem_map as NULL, instead of checking directly against SECTION_MARKED_PRESENT bit. (makedumpfile will be better to change the assumption, and need a patch) The bug can be reproduced on IBM POWERVM by "drmgr -c mem -r -q 5" , trigger a crash, and save vmcore by makedumpfile [1]: makedumpfile, commit e73016540293 ("[v1.6.7] Update version") Link: http://lkml.kernel.org/r/1579487594-28889-1-git-send-email-kernelfans@gmail.com Signed-off-by: Pingfan Liu Acked-by: Michal Hocko Acked-by: David Hildenbrand Cc: Dan Williams Cc: Oscar Salvador Cc: Baoquan He Cc: Qian Cai Cc: Kazuhito Hagio Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

memcg: fix a crash in wb_workfn when a device disappears

2020-02-11T12:36:43Z

commit 68f23b89067fdf187763e75a56087550624fdbee upstream. Without memcg, there is a one-to-one mapping between the bdi and bdi_writeback structures. In this world, things are fairly straightforward; the first thing bdi_unregister() does is to shutdown the bdi_writeback structure (or wb), and part of that writeback ensures that no other work queued against the wb, and that the wb is fully drained. With memcg, however, there is a one-to-many relationship between the bdi and bdi_writeback structures; that is, there are multiple wb objects which can all point to a single bdi. There is a refcount which prevents the bdi object from being released (and hence, unregistered). So in theory, the bdi_unregister() *should* only get called once its refcount goes to zero (bdi_put will drop the refcount, and when it is zero, release_bdi gets called, which calls bdi_unregister). Unfortunately, del_gendisk() in block/gen_hd.c never got the memo about the Brave New memcg World, and calls bdi_unregister directly. It does this without informing the file system, or the memcg code, or anything else. This causes the root wb associated with the bdi to be unregistered, but none of the memcg-specific wb's are shutdown. So when one of these wb's are woken up to do delayed work, they try to dereference their wb->bdi->dev to fetch the device name, but unfortunately bdi->dev is now NULL, thanks to the bdi_unregister() called by del_gendisk(). As a result, *boom*. Fortunately, it looks like the rest of the writeback path is perfectly happy with bdi->dev and bdi->owner being NULL, so the simplest fix is to create a bdi_dev_name() function which can handle bdi->dev being NULL. This also allows us to bulletproof the writeback tracepoints to prevent them from dereferencing a NULL pointer and crashing the kernel if one is tracing with memcg's enabled, and an iSCSI device dies or a USB storage stick is pulled. The most common way of triggering this will be hotremoval of a device while writeback with memcg enabled is going on. It was triggering several times a day in a heavily loaded production environment. Google Bug Id: 145475544 Link: https://lore.kernel.org/r/20191227194829.150110-1-tytso@mit.edu Link: http://lkml.kernel.org/r/20191228005211.163952-1-tytso@mit.edu Signed-off-by: Theodore Ts'o Cc: Chris Mason Cc: Tejun Heo Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/mempolicy.c: fix out of bounds write in mpol_parse_str()

2020-02-04T18:18:01Z

commit c7a91bc7c2e17e0a9c8b9745a2cb118891218fd1 upstream. What we are trying to do is change the '=' character to a NUL terminator and then at the end of the function we restore it back to an '='. The problem is there are two error paths where we jump to the end of the function before we have replaced the '=' with NUL. We end up putting the '=' in the wrong place (possibly one element before the start of the buffer). Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com Fixes: 095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display") Signed-off-by: Dan Carpenter Acked-by: Vlastimil Babka Dmitry Vyukov Cc: Michal Hocko Cc: Dan Carpenter Cc: Lee Schermerhorn Cc: Andrea Arcangeli Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm: memcg/slab: call flush_memcg_workqueue() only if memcg workqueue is valid

2020-01-14T02:19:02Z

When booting with amd_iommu=off, the following WARNING message appears: AMD-Vi: AMD IOMMU disabled on kernel command-line ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:2772 flush_workqueue+0x42e/0x450 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc3-amd-iommu #6 Hardware name: Lenovo ThinkSystem SR655-2S/7D2WRCZ000, BIOS D8E101L-1.00 12/05/2019 RIP: 0010:flush_workqueue+0x42e/0x450 Code: ff 0f 0b e9 7a fd ff ff 4d 89 ef e9 33 fe ff ff 0f 0b e9 7f fd ff ff 0f 0b e9 bc fd ff ff 0f 0b e9 a8 fd ff ff e8 52 2c fe ff <0f> 0b 31 d2 48 c7 c6 e0 88 c5 95 48 c7 c7 d8 ad f0 95 e8 19 f5 04 Call Trace: kmem_cache_destroy+0x69/0x260 iommu_go_to_state+0x40c/0x5ab amd_iommu_prepare+0x16/0x2a irq_remapping_prepare+0x36/0x5f enable_IR_x2apic+0x21/0x172 default_setup_apic_routing+0x12/0x6f apic_intr_mode_init+0x1a1/0x1f1 x86_late_time_init+0x17/0x1c start_kernel+0x480/0x53f secondary_startup_64+0xb6/0xc0 ---[ end trace 30894107c3749449 ]--- x2apic: IRQ remapping doesn't support X2APIC mode x2apic disabled The warning is caused by the calling of 'kmem_cache_destroy()' in free_iommu_resources(). Here is the call path: free_iommu_resources kmem_cache_destroy flush_memcg_workqueue flush_workqueue The root cause is that the IOMMU subsystem runs before the workqueue subsystem, which the variable 'wq_online' is still 'false'. This leads to the statement 'if (WARN_ON(!wq_online))' in flush_workqueue() is 'true'. Since the variable 'memcg_kmem_cache_wq' is not allocated during the time, it is unnecessary to call flush_memcg_workqueue(). This prevents the WARNING message triggered by flush_workqueue(). Link: http://lkml.kernel.org/r/20200103085503.1665-1-ahuang12@lenovo.com Fixes: 92ee383f6daab ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Adrian Huang Reported-by: Xiaochun Lee Reviewed-by: Shakeel Butt Cc: Joerg Roedel Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Michal Hocko Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds