user/sven/linux.git/net/bluetooth, branch ipvs/cleanups

bluetooth: handle l2cap_create_connless_pdu() errors

2010-04-28T00:03:36Z

l2cap_create_connless_pdu() can sometimes return ERR_PTR(-ENOMEM) or ERR_PTR(-EFAULT). Signed-off-by: Dan Carpenter Acked-by: Marcel Holtmann Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2010-04-06T15:34:06Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ...

net: check the length of the socket address passed to connect(2)

2010-04-02T00:26:01Z

check the length of the socket address passed to connect(2). Check the length of the socket address passed to connect(2). If the length is invalid, -EINVAL will be returned. Signed-off-by: Changli Gao ---- net/bluetooth/l2cap.c | 3 ++- net/bluetooth/rfcomm/sock.c | 3 ++- net/bluetooth/sco.c | 3 ++- net/can/bcm.c | 3 +++ net/ieee802154/af_ieee802154.c | 3 +++ net/ipv4/af_inet.c | 5 +++++ net/netlink/af_netlink.c | 3 +++ 7 files changed, 20 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Bluetooth: Fix kernel crash on L2CAP stress tests

2010-03-21T04:49:36Z

Added very simple check that req buffer has enough space to fit configuration parameters. Shall be enough to reject packets with configuration size more than req buffer. Crash trace below [ 6069.659393] Unable to handle kernel paging request at virtual address 02000205 [ 6069.673034] Internal error: Oops: 805 [#1] PREEMPT ... [ 6069.727172] PC is at l2cap_add_conf_opt+0x70/0xf0 [l2cap] [ 6069.732604] LR is at l2cap_recv_frame+0x1350/0x2e78 [l2cap] ... [ 6070.030303] Backtrace: [ 6070.032806] [] (l2cap_add_conf_opt+0x0/0xf0 [l2cap]) from [] (l2cap_recv_frame+0x1350/0x2e78 [l2cap]) [ 6070.043823] r8:dc5d3100 r7:df2a91d6 r6:00000001 r5:df2a8000 r4:00000200 [ 6070.050659] [] (l2cap_recv_frame+0x0/0x2e78 [l2cap]) from [] (l2cap_recv_acldata+0x2bc/0x350 [l2cap]) [ 6070.061798] [] (l2cap_recv_acldata+0x0/0x350 [l2cap]) from [] (hci_rx_task+0x244/0x478 [bluetooth]) [ 6070.072631] r6:dc647700 r5:00000001 r4:df2ab740 [ 6070.077362] [] (hci_rx_task+0x0/0x478 [bluetooth]) from [] (tasklet_action+0x78/0xd8) [ 6070.087005] [] (tasklet_action+0x0/0xd8) from [] Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann

Bluetooth: Convert debug files to actually use debugfs instead of sysfs

2010-03-21T04:49:35Z

Some of the debug files ended up wrongly in sysfs, because at that point of time, debugfs didn't exist. Convert these files to use debugfs and also seq_file. This patch converts all of these files at once and then removes the exported symbol for the Bluetooth sysfs class. Signed-off-by: Marcel Holtmann

Bluetooth: Fix potential bad memory access with sysfs files

2010-03-21T04:49:32Z

When creating a high number of Bluetooth sockets (L2CAP, SCO and RFCOMM) it is possible to scribble repeatedly on arbitrary pages of memory. Ensure that the content of these sysfs files is always less than one page. Even if this means truncating. The files in question are scheduled to be moved over to debugfs in the future anyway. Based on initial patches from Neil Brown and Linus Torvalds Reported-by: Neil Brown Signed-off-by: Marcel Holtmann

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2010-03-13T22:50:18Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits) bridge: ensure to unlock in error path in br_multicast_query(). drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages sky2: Avoid rtnl_unlock without rtnl_lock ipv6: Send netlink notification when DAD fails drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant ipconfig: Handle devices which take some time to come up. mac80211: Fix memory leak in ieee80211_if_write() mac80211: Fix (dynamic) power save entry ipw2200: use kmalloc for large local variables ath5k: read eeprom IQ calibration values correctly for G mode ath5k: fix I/Q calibration (for real) ath5k: fix TSF reset ath5k: use fixed antenna for tx descriptors libipw: split ieee->networks into small pieces mac80211: Fix sta_mtx unlocking on insert STA failure path rt2x00: remove KSEG1ADDR define from rt2x00soc.h net: add ColdFire support to the smc91x driver asix: fix setting mac address for AX88772 ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}. net: Fix dev_mc_add() ...

driver-core: Add attribute argument to class_attribute show/store

2010-03-08T01:04:48Z

Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. This makes the class attributes the same as sysdev_class attributes and plain attributes. This will allow further cleanups in drivers. Full tree sweep converting all users. Signed-off-by: Andi Kleen Signed-off-by: Greg Kroah-Hartman

Bluetooth: Use single_open() for inquiry cache within debugfs

2010-03-03T09:04:38Z

The inquiry cache information in debugfs should be using seq_file support and not allocating memory on the stack for the string. Since the usage of these information is really seldom, using single_open() for it is good enough. Signed-off-by: Marcel Holtmann Signed-off-by: David S. Miller