user/sven/linux.git/net/socket.c, branch v6.15.1

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-03-26T16:32:10Z

Merge in late fixes to prepare for the 6.15 net-next PR. No conflicts, adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Jakub Kicinski

net-timestamp: COMPLETION timestamp on packet tx completion

2025-03-25T16:48:05Z

Add SOF_TIMESTAMPING_TX_COMPLETION, for requesting a software timestamp when hardware reports a packet completed. Completion tstamp is useful for Bluetooth, as hardware timestamps do not exist in the HCI specification except for ISO packets, and the hardware has a queue where packets may wait. In this case the software SND timestamp only reflects the kernel-side part of the total latency (usually small) and queue length (usually 0 unless HW buffers congested), whereas the completion report time is more informative of the true latency. It may also be useful in other cases where HW TX timestamps cannot be obtained and user wants to estimate an upper bound to when the TX probably happened. Signed-off-by: Pauli Virtanen Reviewed-by: Willem de Bruijn Signed-off-by: Luiz Augusto von Dentz

net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF.

2025-03-21T21:10:06Z

SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 893b19587534 ("net: bridge: fix ioctl locking") Reported-by: syzkaller Reported-by: yan kang Reported-by: yue sun Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/ Signed-off-by: Kuniyuki Iwashima Acked-by: Stanislav Fomichev Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni

net: skb: free up one bit in tx_flags

2025-02-27T03:01:08Z

The linked series wants to add skb tx completion timestamps. That needs a bit in skb_shared_info.tx_flags, but all are in use. A per-skb bit is only needed for features that are configured on a per packet basis. Per socket features can be read from sk->sk_tsflags. Per packet tsflags can be set in sendmsg using cmsg, but only those in SOF_TIMESTAMPING_TX_RECORD_MASK. Per packet tsflags can also be set without cmsg by sandwiching a send inbetween two setsockopts: val |= SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); write(fd, buf, sz); val &= ~SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); Changing a datapath test from skb_shinfo(skb)->tx_flags to skb->sk->sk_tsflags can change behavior in that case, as the tx_flags is written before the second setsockopt updates sk_tsflags. Therefore, only bits can be reclaimed that cannot be set by cmsg and are also highly unlikely to be used to target individual packets otherwise. Free up the bit currently used for SKBTX_HW_TSTAMP_USE_CYCLES. This selects between clock and free running counter source for HW TX timestamps. It is probable that all packets of the same socket will always use the same source. Link: https://lore.kernel.org/netdev/cover.1739988644.git.pav@iki.fi/ Signed-off-by: Willem de Bruijn Reviewed-by: Jason Xing Reviewed-by: Gerhard Engleder Link: https://patch.msgid.link/20250225023416.2088705-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski

bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback

2025-02-20T22:29:36Z

Support hw SCM_TSTAMP_SND case for bpf timestamping. Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_HW_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application. To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping. Considering some drivers don't assign the skb with hardware timestamp, this patch does the assignment and then BPF program can acquire the hwstamp from skb directly. Signed-off-by: Jason Xing Signed-off-by: Martin KaFai Lau Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20250220072940.99994-9-kerneljasonxing@gmail.com

fsnotify: disable notification by default for all pseudo files

2025-02-07T09:27:26Z

Most pseudo files are not applicable for fsnotify events at all, let alone to the new pre-content events. Disable notifications to all files allocated with alloc_file_pseudo() and enable legacy inotify events for the specific cases of pipe and socket, which have known users of inotify events. Pre-content events are also kept disabled for sockets and pipes. Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches") Reported-by: Alex Williamson Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/ Suggested-by: Linus Torvalds Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wi2pThSVY=zhO=ZKxViBj5QCRX-=AS2+rVknQgJnHXDFg@mail.gmail.com/ Tested-by: Alex Williamson Signed-off-by: Amir Goldstein Link: https://lore.kernel.org/r/20250203223205.861346-3-amir73il@gmail.com Signed-off-by: Christian Brauner

socket: Remove unused kernel_sendmsg_locked

2025-01-15T01:29:04Z

The last use of kernel_sendmsg_locked() was removed in 2023 by commit dc97391e6610 ("sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)") Remove it. Signed-off-by: Dr. David Alan Gilbert Reviewed-by: Kalesh AP Reviewed-by: Kuniyuki Iwashima Reviewed-by: Joe Damato Link: https://patch.msgid.link/20250112131318.63753-1-linux@treblig.org Signed-off-by: Jakub Kicinski

net: hide the definition of dev_get_by_napi_id()

2025-01-11T02:37:01Z

There are no module callers of dev_get_by_napi_id(), and commit d1cacd747768 ("netdev: prevent accessing NAPI instances from another namespace") proves that getting NAPI by id needs to be done with care. So hide dev_get_by_napi_id(). Reviewed-by: Jacob Keller Reviewed-by: Kalesh AP Reviewed-by: Joe Damato Link: https://patch.msgid.link/20250110004924.3212260-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

sock: Introduce SO_RCVPRIORITY socket option

2024-12-17T02:16:44Z

Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the ancillary data returned by recvmsg(). This is analogous to the existing support for SO_RCVMARK, as implemented in commit 6fd1d51cfa253 ("net: SO_RCVMARK socket option for SO_MARK with recvmsg()"). Reviewed-by: Willem de Bruijn Suggested-by: Ferenc Fejes Signed-off-by: Anna Emese Nyiri Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com Signed-off-by: Jakub Kicinski

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-11-21T16:28:08Z

Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...