user/sven/linux.git/net/wireless, branch v4.14.73

nl80211: Add a missing break in parse_station_flags

2018-09-05T07:26:24Z

[ Upstream commit 5cf3006cc81d9aa09a10aa781fc065546b12919d ] I was looking at usually suppressed gcc warnings, [-Wimplicit-fallthrough=] in this case: The code definitely looks like a break is missing here. However I am not able to test the NL80211_IFTYPE_MESH_POINT, nor do I actually know what might be :) So please use this patch with caution and only if you are able to do some testing. Signed-off-by: Bernd Edlinger [johannes: looks obvious enough to apply as is, interesting though that it never seems to have been a problem] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nl80211: check nla_parse_nested() return values

2018-08-24T11:09:09Z

[ Upstream commit 95bca62fb723a121954fc7ae5473bb2c1f0d5986 ] At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nl80211: relax ht operation checks for mesh

2018-08-24T11:09:08Z

[ Upstream commit 188f60ab8e787fcbb5ac9d64ede23a0070231f09 ] Commit 9757235f451c, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma Signed-off-by: Bob Copeland Reviewed-by: Masashi Honma Reviewed-by: Masashi Honma Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

cfg80211: clear wep keys after disconnection

2018-05-30T05:51:58Z

[ Upstream commit 3027a8e799b20fc922496a12f8ad2f9f36a8a696 ] When a low level driver calls cfg80211_disconnected(), wep keys are not cleared. As a result, following connection requests will fail since cfg80211 internal state shows a connection is still in progress. Fix this by clearing the wep keys when disconnecting. Signed-off-by: Avraham Stern Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

cfg80211: limit wiphy names to 128 bytes

2018-05-25T14:17:35Z

commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream. There's currently no limit on wiphy names, other than netlink message size and memory limitations, but that causes issues when, for example, the wiphy name is used in a uevent, e.g. in rfkill where we use the same name for the rfkill instance, and then the buffer there is "only" 2k for the environment variables. This was reported by syzkaller, which used a 4k name. Limit the name to something reasonable, I randomly picked 128. Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

nl80211: Check for the required netlink attribute presence

2018-03-03T09:24:34Z

[ Upstream commit 3ea15452ee85754f70f3b9fa1f23165ef2e77ba7 ] nl80211_nan_add_func() does not check if the required attribute NL80211_NAN_FUNC_FOLLOW_UP_DEST is present when processing NL80211_CMD_ADD_NAN_FUNCTION request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attribute presence. Signed-off-by: Hao Chen Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mac80211_hwsim: validate number of different channels

2018-02-25T10:07:45Z

commit 51a1aaa631c90223888d8beac4d649dc11d2ca55 upstream. When creating a new radio on the fly, hwsim allows this to be done with an arbitrary number of channels, but cfg80211 only supports a limited number of simultaneous channels, leading to a warning. Fix this by validating the number - this requires moving the define for the maximum out to a visible header file. Reported-by: syzbot+8dd9051ff19940290931@syzkaller.appspotmail.com Fixes: b59ec8dd4394 ("mac80211_hwsim: fix number of channels in interface combinations") Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

cfg80211: check dev_set_name() return value

2018-02-25T10:07:45Z

commit 59b179b48ce2a6076448a44531242ac2b3f6cef2 upstream. syzbot reported a warning from rfkill_alloc(), and after a while I think that the reason is that it was doing fault injection and the dev_set_name() failed, leaving the name NULL, and we didn't check the return value and got to rfkill_alloc() with a NULL name. Since we really don't want a NULL name, we ought to check the return value. Fixes: fb28ad35906a ("net: struct device - replace bus_id with dev_name(), dev_set_name()") Reported-by: syzbot+1ddfb3357e1d7bb5b5d3@syzkaller.appspotmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

nl80211: Sanitize array index in parse_txq_params

2018-02-07T19:12:23Z

commit 259d8c1e984318497c84eef547bbb6b1d9f4eb05 Wireless drivers rely on parse_txq_params to validate that txq_params->ac is less than NL80211_NUM_ACS by the time the low-level driver's ->conf_tx() handler is called. Use a new helper, array_index_nospec(), to sanitize txq_params->ac with respect to speculation. I.e. ensure that any speculation into ->conf_tx() handlers is done with a value of txq_params->ac that is within the bounds of [0, NL80211_NUM_ACS). Reported-by: Christian Lamparter Reported-by: Elena Reshetova Signed-off-by: Dan Williams Signed-off-by: Thomas Gleixner Acked-by: Johannes Berg Cc: linux-arch@vger.kernel.org Cc: kernel-hardening@lists.openwall.com Cc: gregkh@linuxfoundation.org Cc: linux-wireless@vger.kernel.org Cc: torvalds@linux-foundation.org Cc: "David S. Miller" Cc: alan@linux.intel.com Link: https://lkml.kernel.org/r/151727419584.33451.7700736761686184303.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2017-11-02T17:04:46Z

Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman " * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license