user/sven/linux.git/net, branch v4.14.262

net: udp: fix alignment problem in udp4_seq_show()

2022-01-11T12:57:38Z

[ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ] $ cat /pro/net/udp before: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 after: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 Signed-off-by: yangxingwu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate

2022-01-11T12:57:38Z

[ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ] The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ipv6: Do cleanup if attribute validation fails in multipath route

2022-01-11T12:57:37Z

[ Upstream commit 95bdba23b5b4aa75fe3e6c84335e638641c707bb ] As Nicolas noted, if gateway validation fails walking the multipath attribute the code should jump to the cleanup to free previously allocated memory. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern Acked-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ipv6: Continue processing multipath route even if gateway attribute is invalid

2022-01-11T12:57:37Z

[ Upstream commit e30a845b0376eb51c9c94f56bbd53b2e08ba822f ] ip6_route_multipath_del loop continues processing the multipath attribute even if delete of a nexthop path fails. For consistency, do the same if the gateway attribute is invalid. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern Acked-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

phonet: refcount leak in pep_sock_accep

2022-01-11T12:57:37Z

commit bcd0f93353326954817a4f9fa55ec57fb38acbb0 upstream. sock_hold(sk) is invoked in pep_sock_accept(), but __sock_put(sk) is not invoked in subsequent failure branches(pep_accept_conn() != 0). Signed-off-by: Hangyu Hua Link: https://lore.kernel.org/r/20211209082839.33985-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Aayush Agarwal Signed-off-by: Greg Kroah-Hartman

sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc

2022-01-11T12:57:36Z

commit 7d18a07897d07495ee140dd319b0e9265c0f68ba upstream. tx_queue_len can be set to ~0U, we need to be more careful about overflows. __fls(0) is undefined, as this report shows: UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24 shift exponent 51770272 is too large for 32-bit type 'int' CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x280/0x370 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route

2022-01-11T12:57:36Z

commit 1ff15a710a862db1101b97810af14aedc835a86a upstream. Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold an IPv6 address. Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery") Signed-off-by: David Ahern Cc: Roopa Prabhu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: Check attribute length for RTA_GATEWAY in multipath route

2022-01-11T12:57:36Z

commit 4619bcf91399f00a40885100fb61d594d8454033 upstream. Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as does the current nla_get_in6_addr. nla_memcpy protects against accessing memory greater than what is in the attribute, but there is no check requiring the attribute to have an IPv6 address. Add it. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: David Ahern Cc: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mac80211: initialize variable have_higher_than_11mbit

2022-01-11T12:57:35Z

commit 68a18ad71378a56858141c4449e02a30c829763e upstream. Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

sctp: use call_rcu to free endpoint

2022-01-05T11:33:49Z

commit 5ec7d18d1813a5bead0b495045606c93873aecbb upstream. This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed. Reported-by: syzbot+9276d76e83e3bcde6c99@syzkaller.appspotmail.com Reported-by: Lee Jones Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump") Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman