user/sven/linux.git/net, branch v4.19.114

mac80211: fix authentication with iwlwifi/mvm

2020-04-02T13:28:22Z

commit be8c827f50a0bcd56361b31ada11dc0a3c2fd240 upstream. The original patch didn't copy the ieee80211_is_data() condition because on most drivers the management frames don't go through this path. However, they do on iwlwifi/mvm, so we do need to keep the condition here. Cc: stable@vger.kernel.org Fixes: ce2e1ca70307 ("mac80211: Check port authorization in the ieee80211_tx_dequeue() case") Signed-off-by: Johannes Berg Signed-off-by: David S. Miller Cc: Woody Suwalski Signed-off-by: Greg Kroah-Hartman

mac80211: Check port authorization in the ieee80211_tx_dequeue() case

2020-04-02T13:28:22Z

commit ce2e1ca703071723ca2dd94d492a5ab6d15050da upstream. mac80211 used to check port authorization in the Data frame enqueue case when going through start_xmit(). However, that authorization status may change while the frame is waiting in a queue. Add a similar check in the dequeue case to avoid sending previously accepted frames after authorization change. This provides additional protection against potential leaking of frames after a station has been disconnected and the keys for it are being removed. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen Link: https://lore.kernel.org/r/20200326155133.ced84317ea29.I34d4c47cd8cc8a4042b38a76f16a601fbcbfd9b3@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX

2020-04-02T13:28:20Z

[ Upstream commit b95d2ccd2ccb834394d50347d0e40dc38a954e4a ] When a frame is transmitted via the nl80211 TX rather than as a normal frame, IEEE80211_TX_CTRL_PORT_CTRL_PROTO wasn't set and this will lead to wrong decisions (rate control etc.) being made about the frame; fix this. Fixes: 911806491425 ("mac80211: Add support for tx_control_port") Signed-off-by: Johannes Berg Link: https://lore.kernel.org/r/20200326155333.f183f52b02f0.I4054e2a8c11c2ddcb795a0103c87be3538690243@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

mac80211: add option for setting control flags

2020-04-02T13:28:20Z

[ Upstream commit 060167729a78d626abaee1a0ebb64b252374426e ] Allows setting of control flags of skb cb - if needed - when calling ieee80211_subif_start_xmit(). Tested-by: Pradeep Kumar Chitrapu Signed-off-by: Rajkumar Manoharan Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

vti6: Fix memory leak of skb if input policy check fails

2020-04-02T13:28:19Z

commit 2a9de3af21aa8c31cd68b0b39330d69f8c1e59df upstream. The vti6_rcv function performs some tests on the retrieved tunnel including checking the IP protocol, the XFRM input policy, the source and destination address. In all but one places the skb is released in the error case. When the input policy check fails the network packet is leaked. Using the same goto-label discard in this case to fix this problem. Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Torsten Hilbrich Reviewed-by: Nicolas Dichtel Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

netfilter: nft_fwd_netdev: validate family and chain type

2020-04-02T13:28:19Z

commit 76a109fac206e158eb3c967af98c178cff738e6a upstream. Make sure the forward action is only used from ingress. Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

netfilter: flowtable: reload ip{v6}h in nf_flow_tuple_ip{v6}

2020-04-02T13:28:19Z

commit 41e9ec5a54f95eee1a57c8d26ab70e0492548c1b upstream. Since pskb_may_pull may change skb->data, so we need to reload ip{v6}h at the right place. Fixes: a908fdec3dda ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d2086871762 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by: Haishuang Yan Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

xfrm: policy: Fix doulbe free in xfrm_policy_timer

2020-04-02T13:28:19Z

commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream. After xfrm_add_policy add a policy, its ref is 2, then xfrm_policy_timer read_lock xp->walk.dead is 0 .... mod_timer() xfrm_policy_kill policy->walk.dead = 1 .... del_timer(&policy->timer) xfrm_pol_put //ref is 1 xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_pol_hold //ref is 1 read_unlock xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_policy_destroy is called twice, which may leads to double free. Call Trace: RIP: 0010:refcount_warn_saturate+0x161/0x210 ... xfrm_policy_timer+0x522/0x600 call_timer_fn+0x1b3/0x5e0 ? __xfrm_decode_session+0x2990/0x2990 ? msleep+0xb0/0xb0 ? _raw_spin_unlock_irq+0x24/0x40 ? __xfrm_decode_session+0x2990/0x2990 ? __xfrm_decode_session+0x2990/0x2990 run_timer_softirq+0x5c5/0x10e0 Fix this by use write_lock_bh in xfrm_policy_kill. Fixes: ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead") Signed-off-by: YueHaibing Acked-by: Timo Teräs Acked-by: Herbert Xu Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire

2020-04-02T13:28:19Z

commit a1a7e3a36e01ca6e67014f8cf673cb8e47be5550 upstream. Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by syz: BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430 Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650 Call Trace: dump_stack+0xe8/0x16e print_address_description.cold.3+0x9/0x23b kasan_report.cold.4+0x64/0x95 memcpy+0x1f/0x50 selinux_xfrm_alloc_user+0x237/0x430 security_xfrm_policy_alloc+0x5c/0xb0 xfrm_policy_construct+0x2b1/0x650 xfrm_add_acquire+0x21d/0xa10 xfrm_user_rcv_msg+0x431/0x6f0 netlink_rcv_skb+0x15a/0x410 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x50e/0x6a0 netlink_sendmsg+0x8ae/0xd40 sock_sendmsg+0x133/0x170 ___sys_sendmsg+0x834/0x9a0 __sys_sendmsg+0x100/0x1e0 do_syscall_64+0xe5/0x660 entry_SYSCALL_64_after_hwframe+0x6a/0xdf So fix it by adding the missing verify_sec_ctx_len check there. Fixes: 980ebd25794f ("[IPSEC]: Sync series - acquire insert") Reported-by: Hangbin Liu Signed-off-by: Xin Long Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

xfrm: fix uctx len check in verify_sec_ctx_len

2020-04-02T13:28:18Z

commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream. It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later. This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt). Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Xin Long Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman