user/sven/linux.git/net, branch v5.4.61

can: j1939: add rxtimer for multipacket broadcast session

2020-08-26T08:41:02Z

[ Upstream commit 0ae18a82686f9b9965a8ce0dd81371871b306ffe ] According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side the required time interval between packets of a multipacket broadcast message is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin allowing for the maximumm spacing of 200ms). For receive side a timeout will occur when a time of greater than 750 ms elapsed between two message packets when more packets were expected. So this patch fix and add rxtimer for multipacket broadcast session. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: j1939: abort multipacket broadcast session when timeout occurs

2020-08-26T08:41:02Z

[ Upstream commit 2b8b2e31555cf55ba3680fb28e2b382e168d7ea1 ] If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart rxtimer, and then calls __j1939_session_cancel() to set session->state = J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call j1939_session_deactivate_activate_next() to deactivate current session, and rxtimer won't be set. But for multipacket broadcast session, __j1939_session_cancel() don't set session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be deactivate and hrtimer_start() is called to start new rxtimer again and again. So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if (!j1939_cb_is_broadcast(&session->skcb)) statement. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: j1939: cancel rxtimer on multipacket broadcast session complete

2020-08-26T08:41:01Z

[ Upstream commit e8b17653088f28a87c81845fa41a2d295a3b458c ] If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message, j1939_session_timers_cancel() should be called to cancel rxtimer. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: j1939: fix support for multipacket broadcast message

2020-08-26T08:41:01Z

[ Upstream commit f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade ] Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus multipacket broadcast message was aborted by receive side because it may come from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv() and j1939_xtp_rx_dat() didn't process broadcast message. So fix it by checking and process broadcast message in j1939_tp_recv(), j1939_tp_cmd_recv() and j1939_xtp_rx_dat(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: j1939: transport: add j1939_session_skb_find_by_offset() function

2020-08-26T08:41:00Z

[ Upstream commit 840835c9281215341d84966a8855f267a971e6a3 ] Sometimes it makes no sense to search the skb by pkt.dpo, since we need next the skb within the transaction block. This may happen if we have an ETP session with CTS set to less than 255 packets. After this patch, we will be able to work with ETP sessions where the block size (ETP.CM_CTS byte 2) is less than 255 packets. Reported-by: Henrique Figueira Reported-by: https://github.com/linux-can/can-utils/issues/228 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack

2020-08-26T08:41:00Z

[ Upstream commit b43e3a82bc432c1caaed8950e7662c143470c54c ] In current J1939 stack implementation, we process all locally send messages as own messages. Even if it was send by CAN_RAW socket. To reproduce it use following commands: testj1939 -P -r can0:0x80 & cansend can0 18238040#0123 This step will trigger false positive not critical warning: j1939_simple_recv: Received already invalidated message With this patch we add additional check to make sure, related skb is own echo message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()

2020-08-26T08:41:00Z

[ Upstream commit 38ba8b9241f5848a49b80fddac9ab5f4692e434e ] syzbot found that at least 2 bytes of kernel information were leaked during getsockname() on AF_CAN CAN_J1939 socket. Since struct sockaddr_can has in fact two holes, simply clear the whole area before filling it with useful data. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 CPU: 0 PID: 8466 Comm: syz-executor511 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 kmsan_internal_check_memory+0x238/0x3d0 mm/kmsan/kmsan.c:423 kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 instrument_copy_to_user include/linux/instrumented.h:91 [inline] _copy_to_user+0x18e/0x260 lib/usercopy.c:39 copy_to_user include/linux/uaccess.h:186 [inline] move_addr_to_user+0x3de/0x670 net/socket.c:237 __sys_getsockname+0x407/0x5e0 net/socket.c:1909 __do_sys_getsockname net/socket.c:1920 [inline] __se_sys_getsockname+0x91/0xb0 net/socket.c:1917 __x64_sys_getsockname+0x4a/0x70 net/socket.c:1917 do_syscall_64+0xad/0x160 arch/x86/entry/common.c:386 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440219 Code: Bad RIP value. RSP: 002b:00007ffe5ee150c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000033 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440219 RDX: 0000000020000240 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Local variable ----address@__sys_getsockname created at: __sys_getsockname+0x91/0x5e0 net/socket.c:1894 __sys_getsockname+0x91/0x5e0 net/socket.c:1894 Bytes 2-3 of 24 are uninitialized Memory access of size 24 starts at ffff8880ba2c7de8 Data copied to user address 0000000020000100 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Robin van der Gracht Cc: Oleksij Rempel Cc: Pengutronix Kernel Team Cc: linux-can@vger.kernel.org Acked-by: Oleksij Rempel Link: https://lore.kernel.org/r/20200813161834.4021638-1-edumazet@google.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

bpf: sock_ops sk access may stomp registers when dst_reg = src_reg

2020-08-26T08:40:59Z

[ Upstream commit 84f44df664e9f0e261157e16ee1acd77cc1bb78d ] Similar to patch ("bpf: sock_ops ctx access may stomp registers") if the src_reg = dst_reg when reading the sk field of a sock_ops struct we generate xlated code, 53: (61) r9 = *(u32 *)(r9 +28) 54: (15) if r9 == 0x0 goto pc+3 56: (79) r9 = *(u64 *)(r9 +0) This stomps on the r9 reg to do the sk_fullsock check and then when reading the skops->sk field instead of the sk pointer we get the sk_fullsock. To fix use similar pattern noted in the previous fix and use the temp field to save/restore a register used to do sk_fullsock check. After the fix the generated xlated code reads, 52: (7b) *(u64 *)(r9 +32) = r8 53: (61) r8 = *(u32 *)(r9 +28) 54: (15) if r9 == 0x0 goto pc+3 55: (79) r8 = *(u64 *)(r9 +32) 56: (79) r9 = *(u64 *)(r9 +0) 57: (05) goto pc+1 58: (79) r8 = *(u64 *)(r9 +32) Here r9 register was in-use so r8 is chosen as the temporary register. In line 52 r8 is saved in temp variable and at line 54 restored in case fullsock != 0. Finally we handle fullsock == 0 case by restoring at line 58. This adds a new macro SOCK_OPS_GET_SK it is almost possible to merge this with SOCK_OPS_GET_FIELD, but I found the extra branch logic a bit more confusing than just adding a new macro despite a bit of duplicating code. Fixes: 1314ef561102e ("bpf: export bpf_sock for BPF_PROG_TYPE_SOCK_OPS prog type") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann Acked-by: Song Liu Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/159718349653.4728.6559437186853473612.stgit@john-Precision-5820-Tower Signed-off-by: Sasha Levin

netfilter: nf_tables: nft_exthdr: the presence return value should be little-endian

2020-08-26T08:40:59Z

[ Upstream commit b428336676dbca363262cc134b6218205df4f530 ] On big-endian machine, the returned register data when the exthdr is present is not being compared correctly because little-endian is assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval() and nft_cmp_fast_init(), calls cpu_to_le32(). The following dump also shows that little endian is assumed: $ nft --debug=netlink add rule ip recordroute forward ip option rr exists counter ip [ exthdr load ipv4 1b @ 7 + 0 present => reg 1 ] [ cmp eq reg 1 0x01000000 ] [ counter pkts 0 bytes 0 ] Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when RR option exists in the packet shows that the comparison fails because the assumption: nft_cmp_fast_init:189 priv->sreg=4 desc.len=8 mask=0xff000000 data.data[0]=0x10003e0 nft_cmp_fast_eval:57 regs->data[priv->sreg=4]=0x1 mask=0xff000000 priv->data=0x1000000 v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the warnings reported by kernel test robot. Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Fixes: c078ca3b0c5b ("netfilter: nft_exthdr: Add support for existence check") Signed-off-by: Stephen Suryaputra Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

svcrdma: Fix another Receive buffer leak

2020-08-26T08:40:55Z

[ Upstream commit 64d26422516b2e347b32e6d9b1d40b3c19a62aae ] During a connection tear down, the Receive queue is flushed before the device resources are freed. Typically, all the Receives flush with IB_WR_FLUSH_ERR. However, any pending successful Receives flush with IB_WR_SUCCESS, and the server automatically posts a fresh Receive to replace the completing one. This happens even after the connection has closed and the RQ is drained. Receives that are posted after the RQ is drained appear never to complete, causing a Receive resource leak. The leaked Receive buffer is left DMA-mapped. To prevent these late-posted recv_ctxt's from leaking, block new Receive posting after XPT_CLOSE is set. Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin