user/sven/linux.git/net, branch v6.6.6

Revert "wifi: cfg80211: fix CQM for non-range use"

2023-12-11T09:40:17Z

This reverts commit 4a7e92551618f3737b305f62451353ee05662f57 which is commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream. It needed to have commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex") applied to properly work, otherwise regressions happen. Link: https://lore.kernel.org/r/e374bb16-5b13-44cc-b11a-2f4eefb1ecf5@manjaro.org Link: https://lore.kernel.org/r/87sf4belmm.fsf@turtle.gmx.de Link: https://lore.kernel.org/r/20231210213930.61378-1-leo@leolam.fr Reported-by: Léo Lam Reported-by: Sven Joachim Reported-by: Philip Müller Cc: Johannes Berg Signed-off-by: Greg Kroah-Hartman

bpf, sockmap: af_unix stream sockets need to hold ref for pair sock

2023-12-08T07:52:23Z

[ Upstream commit 8866730aed5100f06d3d965c22f1c61f74942541 ] AF_UNIX stream sockets are a paired socket. So sending on one of the pairs will lookup the paired socket as part of the send operation. It is possible however to put just one of the pairs in a BPF map. This currently increments the refcnt on the sock in the sockmap to ensure it is not free'd by the stack before sockmap cleans up its state and stops any skbs being sent/recv'd to that socket. But we missed a case. If the peer socket is closed it will be free'd by the stack. However, the paired socket can still be referenced from BPF sockmap side because we hold a reference there. Then if we are sending traffic through BPF sockmap to that socket it will try to dereference the free'd pair in its send logic creating a use after free. And following splat: [59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0 [59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954 [...] [59.905468] Call Trace: [59.905787] [59.906066] dump_stack_lvl+0x130/0x1d0 [59.908877] print_report+0x16f/0x740 [59.910629] kasan_report+0x118/0x160 [59.912576] sk_wake_async+0x31/0x1b0 [59.913554] sock_def_readable+0x156/0x2a0 [59.914060] unix_stream_sendmsg+0x3f9/0x12a0 [59.916398] sock_sendmsg+0x20e/0x250 [59.916854] skb_send_sock+0x236/0xac0 [59.920527] sk_psock_backlog+0x287/0xaa0 To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The primarily problem with keeping this logic in bpf_unix was: In the sock close() we could handle the deref by having a close handler. But, when we are destroying the psock through a map delete operation we wouldn't have gotten any signal thorugh the proto struct other than it being replaced. If we do the deref from the proto replace its too early because we need to deref the sk_pair after the backlog worker has been stopped. Given all this it seems best to just cache it at the end of the psock and eat 8B for the af_unix and vsock users. Notice dgram sockets are OK because they handle locking already. Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com Signed-off-by: Sasha Levin

ethtool: don't propagate EOPNOTSUPP from dumps

2023-12-08T07:52:23Z

[ Upstream commit cbeb989e41f4094f54bec2cecce993f26f547bea ] The default dump handler needs to clear ret before returning. Otherwise if the last interface returns an inconsequential error this error will propagate to user space. This may confuse user space (ethtool CLI seems to ignore it, but YNL doesn't). It will also terminate the dump early for mutli-skb dump, because netlink core treats EOPNOTSUPP as a real error. Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush

2023-12-08T07:52:21Z

[ Upstream commit 3e3a2b645c043f7e3e488d5011478cefb69bbe8b ] This fixes WARN_ONs when using AP_VLANs after station removal. The flush call passed AP_VLAN vif to driver, but because these vifs are virtual and not registered with drivers, we need to translate to the correct AP vif first. Closes: https://github.com/openwrt/openwrt/issues/12420 Fixes: 0b75a1b1e42e ("wifi: mac80211: flush queues on STA removal") Fixes: d00800a289c9 ("wifi: mac80211: add flush_sta method") Tested-by: Konstantin Demin Tested-by: Koen Vandeputte Signed-off-by: Oldřich Jedlička Link: https://lore.kernel.org/r/20231104141333.3710-1-oldium.pro@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet

2023-12-08T07:52:21Z

[ Upstream commit e2b706c691905fe78468c361aaabc719d0a496f1 ] When I perform the following test operations: 1.ip link add br0 type bridge 2.brctl addif br0 eth0 3.ip addr add 239.0.0.1/32 dev eth0 4.ip addr add 239.0.0.1/32 dev br0 5.ip addr add 224.0.0.1/32 dev br0 6.while ((1)) do ifconfig br0 up ifconfig br0 down done 7.send IGMPv2 query packets to port eth0 continuously. For example, ./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00 1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00" The preceding tests may trigger the refcnt uaf issue of the mc list. The stack is as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25) CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:refcount_warn_saturate (lib/refcount.c:25) RSP: 0018:ffffb68f00657910 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900 RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680 R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00 FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0 Call Trace: igmp_heard_query (net/ipv4/igmp.c:1068) igmp_rcv (net/ipv4/igmp.c:1132) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) netif_receive_skb_internal (net/core/dev.c:5729) netif_receive_skb (net/core/dev.c:5788) br_handle_frame_finish (net/bridge/br_input.c:216) nf_hook_bridge_pre (net/bridge/br_input.c:294) __netif_receive_skb_core (net/core/dev.c:5423) __netif_receive_skb_list_core (net/core/dev.c:5606) __netif_receive_skb_list (net/core/dev.c:5674) netif_receive_skb_list_internal (net/core/dev.c:5764) napi_gro_receive (net/core/gro.c:609) e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6735) __do_softirq (kernel/softirq.c:554) run_ksoftirqd (kernel/softirq.c:913) smpboot_thread_fn (kernel/smpboot.c:164) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:250) The root causes are as follows: Thread A Thread B ... netif_receive_skb br_dev_stop ... br_multicast_leave_snoopers ... __ip_mc_dec_group ... __igmp_group_dropped igmp_rcv igmp_stop_timer igmp_heard_query //ref = 1 ip_ma_put igmp_mod_timer refcount_dec_and_test igmp_start_timer //ref = 0 ... refcount_inc //ref increases from 0 When the device receives an IGMPv2 Query message, it starts the timer immediately, regardless of whether the device is running. If the device is down and has left the multicast group, it will cause the mc list refcount uaf issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao Reviewed-by: Eric Dumazet Reviewed-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

wifi: cfg80211: fix CQM for non-range use

2023-12-08T07:52:21Z

commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream. My prior race fix here broke CQM when ranges aren't used, as the reporting worker now requires the cqm_config to be set in the wdev, but isn't set when there's no range configured. Rather than continuing to special-case the range version, set the cqm_config always and configure accordingly, also tracking if range was used or not to be able to clear the configuration appropriately with the same API, which was actually not right if both were implemented by a driver for some reason, as is the case with mac80211 (though there the implementations are equivalent so it doesn't matter.) Also, the original multiple-RSSI commit lost checking for the callback, so might have potentially crashed if a driver had neither implementation, and userspace tried to use it despite not being advertised as supported. Cc: stable@vger.kernel.org Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

tls: fix NULL deref on tls_sw_splice_eof() with empty record

2023-12-03T06:33:07Z

commit 53f2cb491b500897a619ff6abd72f565933760f0 upstream. syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush") Cc: stable@vger.kernel.org Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com Signed-off-by: Jann Horn Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net/smc: avoid data corruption caused by decline

2023-12-03T06:33:04Z

[ Upstream commit e6d71b437abc2f249e3b6a1ae1a7228e09c6e563 ] We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution. Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: D. Wythe Reviewed-by: Wen Gu Reviewed-by: Wenjia Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ipv4: Correct/silence an endian warning in __ip_do_redirect

2023-12-03T06:33:04Z

[ Upstream commit c0e2926266af3b5acf28df0a8fc6e4d90effe0bb ] net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types) net/ipv4/route.c:783:46: expected unsigned int [usertype] key net/ipv4/route.c:783:46: got restricted __be32 [usertype] new_gw Fixes: 969447f226b4 ("ipv4: use new_gw for redirect neigh lookup") Suggested-by: Eric Dumazet Signed-off-by: Kunwu Chan Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bpf: Fix dev's rx stats for bpf_redirect_peer traffic

2023-12-03T06:33:04Z

[ Upstream commit 024ee930cb3c9ae49e4266aee89cfde0ebb407e1 ] Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium) is not accounted for in the RX stats of supported devices (that is, veth and netkit), confusing user space metrics collectors such as cAdvisor [0], as reported by Youlun. Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the @tstats per-CPU counters (instead of @lstats, or @dstats). To make this more fool-proof, error out when ndo_get_peer_dev is set but @tstats are not selected. [0] Specifically, the "container_network_receive_{byte,packet}s_total" counters are affected. Fixes: 9aa1206e8f48 ("bpf: Add redirect_peer helper") Reported-by: Youlun Zhang Signed-off-by: Peilin Ye Co-developed-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau Signed-off-by: Sasha Levin