user/sven/linux.git/rust/kernel/net, branch v6.14

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-01-22T16:28:57Z

Pull networking updates from Paolo Abeni: "This is slightly smaller than usual, with the most interesting work being still around RTNL scope reduction. Core: - More core refactoring to reduce the RTNL lock contention, including preparatory work for the per-network namespace RTNL lock, replacing RTNL lock with a per device-one to protect NAPI-related net device data and moving synchronize_net() calls outside such lock. - Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and more specific TCP coverage. - Reduce network namespace tear-down time by removing per-subsystems synchronize_net() in tipc and sched. - Add flow label selector support for fib rules, allowing traffic redirection based on such header field. Netfilter: - Do not remove netdev basechain when last device is gone, allowing netdev basechains without devices. - Revisit the flowtable teardown strategy, dealing better with fin, reset and re-open events. - Scale-up IP-vs connection dumping by avoiding linear search on each restart. Protocols: - A significant XDP socket refactor, consolidating and optimizing several helpers into the core - Better scaling of ICMP rate-limiting, by removing false-sharing in inet peers handling. - Introduces netlink notifications for multicast IPv4 and IPv6 address changes. - Add ipsec support for IP-TFS/AggFrag encapsulation, allowing aggregation and fragmentation of the inner IP. - Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to avoid local port exhaustion issues when the average connection lifetime is very short. - Support updating keys (re-keying) for connections using kernel TLS (for TLS 1.3 only). - Support ipv4-mapped ipv6 address clients in smc-r v2. - Add support for jumbo data packet transmission in RxRPC sockets, gluing multiple data packets in a single UDP packet. - Support RxRPC RACK-TLP to manage packet loss and retransmission in conjunction with the congestion control algorithm. Driver API: - Introduce a unified and structured interface for reporting PHY statistics, exposing consistent data across different H/W via ethtool. - Make timestamping selectable, allow the user to select the desired hwtstamp provider (PHY or MAC) administratively. - Add support for configuring a header-data-split threshold (HDS) value via ethtool, to deal with partial or buggy H/W implementation. - Consolidate DSA drivers Energy Efficiency Ethernet support. - Add EEE management to phylink, making use of the phylib implementation. - Add phylib support for in-band capabilities negotiation. - Simplify how phylib-enabled mac drivers expose the supported interfaces. Tests and tooling: - Make the YNL tool package-friendly to make it easier to deploy it separately from the kernel. - Increase TCP selftest coverage importing several packetdrill test-cases. - Regenerate the ethtool uapi header from the YNL spec, to ease maintenance and future development. - Add YNL support for decoding the link types used in net self-tests, allowing a single build to run both net and drivers/net. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - add cross E-Switch QoS support - add SW Steering support for ConnectX-8 - implement support for HW-Managed Flow Steering, improving the rule deletion/insertion rate - support for multi-host LAG - Intel (ixgbe, ice, igb): - ice: add support for devlink health events - ixgbe: add initial support for E610 chipset variant - igb: add support for AF_XDP zero-copy - Meta: - add support for basic RSS config - allow changing the number of channels - add hardware monitoring support - Broadcom (bnxt): - implement TCP data split and HDS threshold ethtool support, enabling Device Memory TCP. - Marvell Octeon: - implement egress ipsec offload support for the cn10k family - Hisilicon (HIBMC): - implement unicast MAC filtering - Ethernet NICs embedded and virtual: - Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding contented atomic operations for drop counters - Freescale: - quicc: phylink conversion - enetc: support Tx and Rx checksum offload and improve TSO performances - MediaTek: - airoha: introduce support for ETS and HTB Qdisc offload - Microchip: - lan78XX USB: preparation work for phylink conversion - Synopsys (stmmac): - support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45 - refactor EEE support to leverage the new driver API - optimize DMA and cache access to increase raw RX performances by 40% - TI: - icssg-prueth: add multicast filtering support for VLAN interface - netkit: - add ability to configure head/tailroom - VXLAN: - accepts packets with user-defined reserved bit - Ethernet switches: - Microchip: - lan969x: add RGMII support - lan969x: improve TX and RX performance using the FDMA engine - nVidia/Mellanox: - move Tx header handling to PCI driver, to ease XDP support - Ethernet PHYs: - Texas Instruments DP83822: - add support for GPIO2 clock output - Realtek: - 8169: add support for RTL8125D rev.b - rtl822x: add hwmon support for the temperature sensor - Microchip: - add support for RDS PTP hardware - consolidate periodic output signal generation - CAN: - several DT-bindings to DT schema conversions - tcan4x5x: - add HW standby support - support nWKRQ voltage selection - kvaser: - allowing Bus Error Reporting runtime configuration - WiFi: - the on-going Multi-Link Operation (MLO) effort continues, affecting both the stack and in drivers - mac80211/cfg80211: - Emergency Preparedness Communication Services (EPCS) station mode support - support for adding and removing station links for MLO - add support for WiFi 7/EHT mesh over 320 MHz channels - report Tx power info for each link - RealTek (rtw88): - enable USB Rx aggregation and USB 3 to improve performance - LED support - RealTek (rtw89): - refactor power save to support Multi-Link Operations - add support for RTL8922AE-VS variant - MediaTek (mt76): - single wiphy multiband support (preparation for MLO) - p2p device support - add TP-Link TXE50UH USB adapter support - Qualcomm (ath10k): - support for the QCA6698AQ IP core - Qualcomm (ath12k): - enable MLO for QCN9274 - Bluetooth: - Allow sysfs to trigger hdev reset, to allow recovering devices not responsive from user-space - MediaTek: add support for MT7922, MT7925, MT7921e devices - Realtek: add support for RTL8851BE devices - Qualcomm: add support for WCN785x devices - ISO: allow BIG re-sync" * tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits) net/rose: prevent integer overflows in rose_setsockopt() net: phylink: fix regression when binding a PHY net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL. ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL. ipv6: Move lifetime validation to inet6_rtm_newaddr(). ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr(). ipv6: Pass dev to inet6_addr_add(). ipv6: Convert inet6_ioctl() to per-netns RTNL. ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup(). ipv6: Hold rtnl_net_lock() in addrconf_dad_work(). ipv6: Hold rtnl_net_lock() in addrconf_verify_work(). ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL. ipv6: Add __in6_dev_get_rtnl_net(). net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags net: mii: Fix the Speed display when the network cable is not connected sysctl net: Remove macro checks for CONFIG_SYSCTL eth: bnxt: update header sizing defaults ...

Merge tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux

2025-01-22T01:48:03Z

Pull rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Finish the move to custom FFI integer types started in the previous cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few cleanups on top thanks to that. - Start to use 'derive(CoercePointee)' on Rust >= 1.84.0. This is a major milestone on the path to build the kernel using only stable Rust features. In particular, previously we were using the unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize', and now we will use the new 'derive_coerce_pointee' one, which is on track to stabilization. This new feature is a macro that essentially expands into code that internally uses the unstable features that we were using before, without having to expose those. With it, stable Rust users, including the kernel, will be able to build custom smart pointers that work with trait objects, e.g.: fn f(p: &Arc) { pr_info!("{p}\n"); } let a: Arc = Arc::new(42i32, GFP_KERNEL)?; let b: Arc = Arc::new("hello there", GFP_KERNEL)?; f(&a); // Prints "42". f(&b); // Prints "hello there". Together with the 'arbitrary_self_types' feature that we started using in the previous cycle, using our custom smart pointers like 'Arc' will eventually only rely in stable Rust. - Introduce 'PROCMACROLDFLAGS' environment variable to allow to link Rust proc macros using different flags than those used for linking Rust host programs (e.g. when 'rustc' uses a different C library than the host programs' one), which Android needs. - Help kernel builds under macOS with Rust enabled by accomodating other naming conventions for dynamic libraries (i.e. '.so' vs. '.dylib') which are used for Rust procedural macros. The actual support for macOS (i.e. the rest of the pieces needed) is provided out-of-tree by others, following the policy used for other parts of the kernel by Kbuild. - Run Clippy for 'rusttest' code too and clean the bits it spotted. - Provide Clippy with the minimum supported Rust version to improve the suggestions it gives. - Document 'bindgen' 0.71.0 regression. 'kernel' crate: - 'build_error!': move users of the hidden function to the documented macro, prevent such uses in the future by moving the function elsewhere and add the macro to the prelude. - 'types' module: add improved version of 'ForeignOwnable::borrow_mut' (which was removed in the past since it was problematic); change 'ForeignOwnable' pointer type to '*mut'. - 'alloc' module: implement 'Display' for 'Box' and align the 'Debug' implementation to it; add example (doctest) for 'ArrayLayout::new()' - 'sync' module: document 'PhantomData' in 'Arc'; use 'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl. - 'uaccess' module: accept 'Vec's with different allocators in 'UserSliceReader::read_all'. - 'workqueue' module: enable run-testing a couple more doctests. - 'error' module: simplify 'from_errno()'. - 'block' module: fix formatting in code documentation (a lint to catch these is being implemented). - Avoid 'unwrap()'s in doctests, which also improves the examples by showing how kernel code is supposed to be written. - Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer. And a few other cleanups" * tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits) kbuild: rust: add PROCMACROLDFLAGS rust: uaccess: generalize userSliceReader to support any Vec rust: kernel: add improved version of `ForeignOwnable::borrow_mut` rust: kernel: reorder `ForeignOwnable` items rust: kernel: change `ForeignOwnable` pointer to mut rust: arc: split unsafe block, add missing comment rust: types: avoid `as` casts rust: arc: use `NonNull::new_unchecked` rust: use derive(CoercePointee) on rustc >= 1.84.0 rust: alloc: add doctest for `ArrayLayout::new()` rust: init: update `stack_try_pin_init` examples rust: error: import `kernel`'s `LayoutError` instead of `core`'s rust: str: replace unwraps with question mark operators rust: page: remove unnecessary helper function from doctest rust: rbtree: remove unwrap in asserts rust: init: replace unwraps with question mark operators rust: use host dylib naming convention to support macOS rust: add `build_error!` to the prelude rust: kernel: move `build_error` hidden function to prevent mistakes rust: use the `build_error!` macro, not the hidden function ...

rust: add `build_error!` to the prelude

2025-01-09T23:19:09Z

The sibling `build_assert!` is already in the prelude, it makes sense that a "core"/"language" facility like this is part of the prelude and users should not be defining their own one (thus there should be no risk of future name collisions and we would want to be aware of them anyway). Thus add `build_error!` into the prelude. Reviewed-by: Alice Ryhl Link: https://lore.kernel.org/r/20241123222849.350287-3-ojeda@kernel.org [ Applied the change to the new miscdevice cases. - Miguel ] Signed-off-by: Miguel Ojeda

rust: use the `build_error!` macro, not the hidden function

2025-01-09T23:19:05Z

Code and some examples were using the function, rather than the macro. The macro is what is documented. Thus move users to the macro. Reviewed-by: Alice Ryhl Link: https://lore.kernel.org/r/20241123222849.350287-1-ojeda@kernel.org [ Applied the change to the new miscdevice cases. - Miguel ] Signed-off-by: Miguel Ojeda

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-12-19T19:35:07Z

Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski

rust: net::phy scope ThisModule usage in the module_phy_driver macro

2024-12-17T12:30:45Z

Similar to the use of $crate::Module, ThisModule should be referred to as $crate::ThisModule in the macro evaluation. The reason the macro previously did not cause any errors is because all the users of the macro would use kernel::prelude::*, bringing ThisModule into scope. Signed-off-by: Rahul Rameshbabu Reviewed-by: FUJITA Tomonori Reviewed-by: Alice Ryhl Link: https://patch.msgid.link/20241214194242.19505-1-sergeantsagara@protonmail.com Signed-off-by: Paolo Abeni

rust: net::phy fix module autoloading

2024-12-17T08:20:07Z

The alias symbol name was renamed. Adjust module_phy_driver macro to create the proper symbol name to fix module autoloading. Fixes: 054a9cd395a7 ("modpost: rename alias symbol for MODULE_DEVICE_TABLE()") Signed-off-by: FUJITA Tomonori Link: https://patch.msgid.link/20241212130015.238863-1-fujita.tomonori@gmail.com Signed-off-by: Paolo Abeni

Merge tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux

2024-11-26T22:00:26Z

Pull rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Enable a series of lints, including safety-related ones, e.g. the compiler will now warn about missing safety comments, as well as unnecessary ones. How safety documentation is organized is a frequent source of review comments, thus having the compiler guide new developers on where they are expected (and where not) is very nice. - Start using '#[expect]': an interesting feature in Rust (stabilized in 1.81.0) that makes the compiler warn if an expected warning was _not_ emitted. This is useful to avoid forgetting cleaning up locally ignored diagnostics ('#[allow]'s). - Introduce '.clippy.toml' configuration file for Clippy, the Rust linter, which will allow us to tweak its behaviour. For instance, our first use cases are declaring a disallowed macro and, more importantly, enabling the checking of private items. - Lints-related fixes and cleanups related to the items above. - Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the kernel into stable Rust, one of the major pieces of the puzzle is the support to write custom types that can be used as 'self', i.e. as receivers, since the kernel needs to write types such as 'Arc' that common userspace Rust would not. 'arbitrary_self_types' has been accepted to become stable, and this is one of the steps required to get there. - Remove usage of the 'new_uninit' unstable feature. - Use custom C FFI types. Includes a new 'ffi' crate to contain our custom mapping, instead of using the standard library 'core::ffi' one. The actual remapping will be introduced in a later cycle. - Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize' instead of 32/64-bit integers. - Fix 'size_t' in bindgen generated prototypes of C builtins. - Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue in the projects, which we managed to trigger with the upcoming tracepoint support. It includes a build test since some distributions backported the fix (e.g. Debian -- thanks!). All major distributions we list should be now OK except Ubuntu non-LTS. 'macros' crate: - Adapt the build system to be able run the doctests there too; and clean up and enable the corresponding doctests. 'kernel' crate: - Add 'alloc' module with generic kernel allocator support and remove the dependency on the Rust standard library 'alloc' and the extension traits we used to provide fallible methods with flags. Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'. Add the 'Box' type (a heap allocation for a single value of type 'T' that is also generic over an allocator and considers the kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add 'ArrayLayout' type. Add 'Vec' (a contiguous growable array type) and its shorthand aliases '{K,V,KV}Vec', including iterator support. For instance, now we may write code such as: let mut v = KVec::new(); v.push(1, GFP_KERNEL)?; assert_eq!(&v, &[1]); Treewide, move as well old users to these new types. - 'sync' module: add global lock support, including the 'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types and the 'global_lock!' macro. Add the 'Lock::try_lock' method. - 'error' module: optimize 'Error' type to use 'NonZeroI32' and make conversion functions public. - 'page' module: add 'page_align' function. - Add 'transmute' module with the existing 'FromBytes' and 'AsBytes' traits. - 'block::mq::request' module: improve rendered documentation. - 'types' module: extend 'Opaque' type documentation and add simple examples for the 'Either' types. drm/panic: - Clean up a series of Clippy warnings. Documentation: - Add coding guidelines for lints and the '#[expect]' feature. - Add Ubuntu to the list of distributions in the Quick Start guide. MAINTAINERS: - Add Danilo Krummrich as maintainer of the new 'alloc' module. And a few other small cleanups and fixes" * tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits) rust: alloc: Fix `ArrayLayout` allocations docs: rust: remove spurious item in `expect` list rust: allow `clippy::needless_lifetimes` rust: warn on bindgen < 0.69.5 and libclang >= 19.1 rust: use custom FFI integer types rust: map `__kernel_size_t` and friends also to usize/isize rust: fix size_t in bindgen prototypes of C builtins rust: sync: add global lock support rust: macros: enable the rest of the tests rust: macros: enable paste! use from macro_rules! rust: enable macros::module! tests rust: kbuild: expand rusttest target for macros rust: types: extend `Opaque` documentation rust: block: fix formatting of `kernel::block::mq::request` module rust: macros: fix documentation of the paste! macro rust: kernel: fix THIS_MODULE header path in ThisModule doc comment rust: page: add Rust version of PAGE_ALIGN rust: helpers: remove unnecessary header includes rust: exports: improve grammar in commentary drm/panic: allow verbose version check ...

rust: use custom FFI integer types

2024-11-10T22:58:00Z

Currently FFI integer types are defined in libcore. This commit creates the `ffi` crate and asks bindgen to use that crate for FFI integer types instead of `core::ffi`. This commit is preparatory and no type changes are made in this commit yet. Signed-off-by: Gary Guo Link: https://lore.kernel.org/r/20240913213041.395655-4-gary@garyguo.net [ Added `rustdoc`, `rusttest` and KUnit tests support. Rebased on top of `rust-next` (e.g. migrated more `core::ffi` cases). Reworded crate docs slightly and formatted. - Miguel ] Signed-off-by: Miguel Ojeda

rust: net::phy always define device_table in module_phy_driver macro

2024-10-03T23:42:18Z

device_table in module_phy_driver macro is defined only when the driver is built as a module. So a PHY driver imports phy::DeviceId module in the following way then hits `unused import` warning when it's compiled as built-in: use kernel::net::phy::DeviceId; kernel::module_phy_driver! { drivers: [PhyQT2025], device_table: [ DeviceId::new_with_driver::(), ], Put device_table in a const. It's not included in the kernel image if unused (when the driver is compiled as built-in), and the compiler doesn't complain. Signed-off-by: FUJITA Tomonori Reviewed-by: Alice Ryhl Link: https://patch.msgid.link/20240930134038.1309-1-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski