user/sven/linux.git/samples/livepatch, branch v5.1.16

Merge branch 'for-5.0/upstream-fixes' into for-linus

2019-03-05T14:55:59Z

Document change towards group maintainership of livepatching code samples/ warning fix from Nicholas Mc Guire

livepatch: samples: non static warnings fix

2019-01-25T15:43:35Z

Sparse reported warnings about non-static symbols. For the variables a simple static attribute is fine - for the functions referenced by livepatch via klp_func the symbol-names must be unmodified in the symbol table and the patchable code has to be emitted. The resolution is to attach __used attribute to the shared statically declared functions. Link: https://lore.kernel.org/lkml/1544965657-26804-1-git-send-email-hofrat@osadl.org/ Suggested-by: Joe Lawrence Signed-off-by: Nicholas Mc Guire Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina

livepatch: Simplify API by removing registration step

2019-01-11T19:51:24Z

The possibility to re-enable a registered patch was useful for immediate patches where the livepatch module had to stay until the system reboot. The improved consistency model allows to achieve the same result by unloading and loading the livepatch module again. Also we are going to add a feature called atomic replace. It will allow to create a patch that would replace all already registered patches. The aim is to handle dependent patches more securely. It will obsolete the stack of patches that helped to handle the dependencies so far. Then it might be unclear when a cumulative patch re-enabling is safe. It would be complicated to support the many modes. Instead we could actually make the API and code easier to understand. Therefore, remove the two step public API. All the checks and init calls are moved from klp_register_patch() to klp_enabled_patch(). Also the patch is automatically freed, including the sysfs interface when the transition to the disabled state is completed. As a result, there is never a disabled patch on the top of the stack. Therefore we do not need to check the stack in __klp_enable_patch(). And we could simplify the check in __klp_disable_patch(). Also the API and logic is much easier. It is enough to call klp_enable_patch() in module_init() call. The patch can be disabled by writing '0' into /sys/kernel/livepatch//enabled. Then the module can be removed once the transition finishes and sysfs interface is freed. The only problem is how to free the structures and kobjects safely. The operation is triggered from the sysfs interface. We could not put the related kobject from there because it would cause lock inversion between klp_mutex and kernfs locks, see kn->count lockdep map. Therefore, offload the free task to a workqueue. It is perfectly fine: + The patch can no longer be used in the livepatch operations. + The module could not be removed until the free operation finishes and module_put() is called. + The operation is asynchronous already when the first klp_try_complete_transition() fails and another call is queued with a delay. Suggested-by: Josh Poimboeuf Signed-off-by: Petr Mladek Acked-by: Miroslav Benes Acked-by: Josh Poimboeuf Signed-off-by: Jiri Kosina

livepatch: check kzalloc return values

2018-12-18T09:23:07Z

kzalloc() return should always be checked - notably in example code where this may be seen as reference. On failure of allocation in livepatch_fix1_dummy_alloc() respectively dummy_alloc() previous allocation is freed (thanks to Petr Mladek for catching this) and NULL returned. Signed-off-by: Nicholas Mc Guire Fixes: 439e7271dc2b ("livepatch: introduce shadow variable API") Acked-by: Joe Lawrence Reviewed-by: Petr Mladek Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina

livepatch: Allow to call a custom callback when freeing shadow variables

2018-04-17T11:42:48Z

We might need to do some actions before the shadow variable is freed. For example, we might need to remove it from a list or free some data that it points to. This is already possible now. The user can get the shadow variable by klp_shadow_get(), do the necessary actions, and then call klp_shadow_free(). This patch allows to do it a more elegant way. The user could implement the needed actions in a callback that is passed to klp_shadow_free() as a parameter. The callback usually does reverse operations to the constructor callback that can be called by klp_shadow_*alloc(). It is especially useful for klp_shadow_free_all(). There we need to do these extra actions for each found shadow variable with the given ID. Note that the memory used by the shadow variable itself is still released later by rcu callback. It is needed to protect internal structures that keep all shadow variables. But the destructor is called immediately. The shadow variable must not be access anyway after klp_shadow_free() is called. The user is responsible to protect this any suitable way. Be aware that the destructor is called under klp_shadow_lock. It is the same as for the contructor in klp_shadow_alloc(). Signed-off-by: Petr Mladek Acked-by: Josh Poimboeuf Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina

livepatch: Initialize shadow variables safely by a custom callback

2018-04-17T11:42:48Z

The existing API allows to pass a sample data to initialize the shadow data. It works well when the data are position independent. But it fails miserably when we need to set a pointer to the shadow structure itself. Unfortunately, we might need to initialize the pointer surprisingly often because of struct list_head. It is even worse because the list might be hidden in other common structures, for example, struct mutex, struct wait_queue_head. For example, this was needed to fix races in ALSA sequencer. It required to add mutex into struct snd_seq_client. See commit b3defb791b26ea06 ("ALSA: seq: Make ioctls race-free") and commit d15d662e89fc667b9 ("ALSA: seq: Fix racy pool initializations") This patch makes the API more safe. A custom constructor function and data are passed to klp_shadow_*alloc() functions instead of the sample data. Note that ctor_data are no longer a template for shadow->data. It might point to any data that might be necessary when the constructor is called. Also note that the constructor is called under klp_shadow_lock. It is an internal spin_lock that synchronizes alloc() vs. get() operations, see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA deadlocks. On the other hand, it allows to do some operations safely. For example, we could add the new structure into an existing list. This must be done only once when the structure is allocated. Reported-by: Nicolai Stange Signed-off-by: Petr Mladek Acked-by: Josh Poimboeuf Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina

livepatch: Remove immediate feature

2018-01-11T09:58:03Z

Immediate flag has been used to disable per-task consistency and patch all tasks immediately. It could be useful if the patch doesn't change any function or data semantics. However, it causes problems on its own. The consistency problem is currently broken with respect to immediate patches. func a patches 1i 2i 3 When the patch 3 is applied, only 2i function is checked (by stack checking facility). There might be a task sleeping in 1i though. Such task is migrated to 3, because we do not check 1i in klp_check_stack_func() at all. Coming atomic replace feature would be easier to implement and more reliable without immediate. Thus, remove immediate feature completely and save us from the problems. Note that force feature has the similar problem. However it is considered as a last resort. If used, administrator should not apply any new live patches and should plan for reboot into an updated kernel. The architectures would now need to provide HAVE_RELIABLE_STACKTRACE to fully support livepatch. Signed-off-by: Miroslav Benes Acked-by: Josh Poimboeuf Signed-off-by: Jiri Kosina

livepatch: add (un)patch callbacks

2017-10-19T08:08:56Z

Provide livepatch modules a klp_object (un)patching notification mechanism. Pre and post-(un)patch callbacks allow livepatch modules to setup or synchronize changes that would be difficult to support in only patched-or-unpatched code contexts. Callbacks can be registered for target module or vmlinux klp_objects, but each implementation is klp_object specific. - Pre-(un)patch callbacks run before any (un)patching transition starts. - Post-(un)patch callbacks run once an object has been (un)patched and the klp_patch fully transitioned to its target state. Example use cases include modification of global data and registration of newly available services/handlers. See Documentation/livepatch/callbacks.txt for details and samples/livepatch/ for examples. Signed-off-by: Joe Lawrence Acked-by: Josh Poimboeuf Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina

livepatch: introduce shadow variable API

2017-09-14T21:06:12Z

Add exported API for livepatch modules: klp_shadow_get() klp_shadow_alloc() klp_shadow_get_or_alloc() klp_shadow_free() klp_shadow_free_all() that implement "shadow" variables, which allow callers to associate new shadow fields to existing data structures. This is intended to be used by livepatch modules seeking to emulate additions to data structure definitions. See Documentation/livepatch/shadow-vars.txt for a summary of the new shadow variable API, including a few common use cases. See samples/livepatch/livepatch-shadow-* for example modules that demonstrate shadow variables. [jkosina@suse.cz: fix __klp_shadow_get_or_alloc() comment as spotted by Josh] Signed-off-by: Joe Lawrence Acked-by: Josh Poimboeuf Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina

livepatch: allow removal of a disabled patch

2017-03-08T08:38:43Z

Currently we do not allow patch module to unload since there is no method to determine if a task is still running in the patched code. The consistency model gives us the way because when the unpatching finishes we know that all tasks were marked as safe to call an original function. Thus every new call to the function calls the original code and at the same time no task can be somewhere in the patched code, because it had to leave that code to be marked as safe. We can safely let the patch module go after that. Completion is used for synchronization between module removal and sysfs infrastructure in a similar way to commit 942e443127e9 ("module: Fix mod->mkobj.kobj potentially freed too early"). Note that we still do not allow the removal for immediate model, that is no consistency model. The module refcount may increase in this case if somebody disables and enables the patch several times. This should not cause any harm. With this change a call to try_module_get() is moved to __klp_enable_patch from klp_register_patch to make module reference counting symmetric (module_put() is in a patch disable path) and to allow to take a new reference to a disabled module when being enabled. Finally, we need to be very careful about possible races between klp_unregister_patch(), kobject_put() functions and operations on the related sysfs files. kobject_put(&patch->kobj) must be called without klp_mutex. Otherwise, it might be blocked by enabled_store() that needs the mutex as well. In addition, enabled_store() must check if the patch was not unregisted in the meantime. There is no need to do the same for other kobject_put() callsites at the moment. Their sysfs operations neither take the lock nor they access any data that might be freed in the meantime. There was an attempt to use kobjects the right way and prevent these races by design. But it made the patch definition more complicated and opened another can of worms. See https://lkml.kernel.org/r/1464018848-4303-1-git-send-email-pmladek@suse.com [Thanks to Petr Mladek for improving the commit message.] Signed-off-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Reviewed-by: Petr Mladek Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina