user/sven/linux.git/samples, branch v5.15

samples/bpf: Relicense bpf_insn.h as GPL-2.0-only OR BSD-2-Clause

2021-09-29T14:03:55Z

libbpf and bpftool have been dual-licensed to facilitate inclusion in software that is not compatible with GPL2-only (ie: Apache2), but the samples are still GPL2-only. Given these files are samples, they get naturally copied around. For example, it is the case for samples/bpf/bpf_insn.h which was copied into the systemd tree: https://github.com/systemd/systemd/blob/main/src/shared/linux/bpf_insn.h Some more context on systemd's needs specifically: Most of systemd is (L)GPL2-or-later, which means there is no perceived incompatibility with Apache2 software and can thus be linked with OpenSSL 3.0. But given this GPL2-only header is included this is currently not possible. Dual-licensing this header solves this problem for us as we are scoping a move to OpenSSL 3.0, see: https://lists.freedesktop.org/archives/systemd-devel/2021-September/046882.html Dual-license this header as GPL-2.0-only OR BSD-2-Clause to follow the same licensing used by libbpf and bpftool: 1bc38b8ff6cc ("libbpf: relicense libbpf as LGPL-2.1 OR BSD-2-Clause") 907b22365115 ("tools: bpftool: dual license all files") Signed-off-by: Luca Boccassi Signed-off-by: Daniel Borkmann Acked-by: Simon Horman Acked-by: Daniel Mack Acked-by: Josef Bacik Acked-by: Joe Stringer Acked-by: Chenbo Feng Acked-by: Björn Töpel Acked-by: Magnus Karlsson Acked-by: Brendan Jackman Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210923000540.47344-1-luca.boccassi@gmail.com

samples: bpf: Fix vmlinux.h generation for XDP samples

2021-09-29T00:21:35Z

Generate vmlinux.h only from the in-tree vmlinux, and remove enum declarations that would cause a build failure in case of version mismatches. There are now two options when building the samples: 1. Compile the kernel to use in-tree vmlinux for vmlinux.h 2. Override VMLINUX_BTF for samples using something like this: make VMLINUX_BTF=/sys/kernel/btf/vmlinux -C samples/bpf This change was tested with relative builds, e.g. cases like: * make O=build -C samples/bpf * make KBUILD_OUTPUT=build -C samples/bpf * make -C samples/bpf * cd samples/bpf && make When a suitable VMLINUX_BTF is not found, the following message is printed: /home/kkd/src/linux/samples/bpf/Makefile:333: *** Cannot find a vmlinux for VMLINUX_BTF at any of " ./vmlinux", build the kernel or set VMLINUX_BTF variable. Stop. Fixes: 384b6b3bbf0d (samples: bpf: Add vmlinux.h generation support) Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Andrii Nakryiko Acked-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/bpf/20210928054608.1799021-1-memxor@gmail.com

Merge tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

2021-09-07T19:08:04Z

Pull kgdb updates from Daniel Thompson: "Changes for kgdb/kdb this cycle are dominated by a change from Sumit that removes as small (256K) private heap from kdb. This is change I've hoped for ever since I discovered how few users of this heap remained in the kernel, so many thanks to Sumit for hunting these down. The other change is an incremental step towards SPDX headers" * tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kernel: debug: Convert to SPDX identifier kdb: Rename members of struct kdbtab_t kdb: Simplify kdb_defcmd macro logic kdb: Get rid of redundant kdb_register_flags() kdb: Rename struct defcmd_set to struct kdb_macro kdb: Get rid of custom debug heap allocator

Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio

2021-09-02T20:41:33Z

Pull VFIO updates from Alex Williamson: - Fix dma-valid return WAITED implementation (Anthony Yznaga) - SPDX license cleanups (Cai Huoqing) - Split vfio-pci-core from vfio-pci and enhance PCI driver matching to support future vendor provided vfio-pci variants (Yishai Hadas, Max Gurtovoy, Jason Gunthorpe) - Replace duplicated reflck with core support for managing first open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai Hadas) - Fix non-modular mdev support and don't nag about request callback support (Christoph Hellwig) - Add semaphore to protect instruction intercept handler and replace open-coded locks in vfio-ap driver (Tony Krowiak) - Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe) * tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits) vfio/pci: Introduce vfio_pci_core.ko vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on' vfio: Use select for eventfd PCI / VFIO: Add 'override_only' support for VFIO PCI sub system PCI: Add 'override_only' field to struct pci_device_id vfio/pci: Move module parameters to vfio_pci.c vfio/pci: Move igd initialization to vfio_pci.c vfio/pci: Split the pci_driver code out of vfio_pci_core.c vfio/pci: Include vfio header in vfio_pci_core.h vfio/pci: Rename ops functions to fit core namings vfio/pci: Rename vfio_pci_device to vfio_pci_core_device vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h vfio/pci: Rename vfio_pci.c to vfio_pci_core.c vfio/ap_ops: Convert to use vfio_register_group_dev() s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification s390/vfio-ap: r/w lock for PQAP interception handler function pointer vfio/type1: Fix vfio_find_dma_valid return vfio-pci/zdev: Remove repeated verbose license text vfio: platform: reset: Convert to SPDX identifier vfio: Remove struct vfio_device_ops open/release ...

Merge tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2021-09-01T15:35:06Z

Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2021-08-31T23:43:06Z

Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2021-08-30T23:42:47Z

Daniel Borkmann says: ==================== bpf-next 2021-08-31 We've added 116 non-merge commits during the last 17 day(s) which contain a total of 126 files changed, 6813 insertions(+), 4027 deletions(-). The main changes are: 1) Add opaque bpf_cookie to perf link which the program can read out again, to be used in libbpf-based USDT library, from Andrii Nakryiko. 2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu. 3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang. 4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch to another congestion control algorithm during init, from Martin KaFai Lau. 5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima. 6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta. 7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT} progs, from Xu Liu and Stanislav Fomichev. 8) Support for __weak typed ksyms in libbpf, from Hao Luo. 9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky. 10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov. 11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann. 12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian, Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others. 13) Another big batch to revamp XDP samples in order to give them consistent look and feel, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits) MAINTAINERS: Remove self from powerpc BPF JIT selftests/bpf: Fix potential unreleased lock samples: bpf: Fix uninitialized variable in xdp_redirect_cpu selftests/bpf: Reduce more flakyness in sockmap_listen bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS bpf: selftests: Add dctcp fallback test bpf: selftests: Add connect_to_fd_opts to network_helpers bpf: selftests: Add sk_state to bpf_tcp_helpers.h bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt selftests: xsk: Preface options with opt selftests: xsk: Make enums lower case selftests: xsk: Generate packets from specification selftests: xsk: Generate packet directly in umem selftests: xsk: Simplify cleanup of ifobjects selftests: xsk: Decrease sending speed selftests: xsk: Validate tx stats on tx thread selftests: xsk: Simplify packet validation in xsk tests selftests: xsk: Rename worker_* functions that are not thread entry points selftests: xsk: Disassociate umem size with packets sent selftests: xsk: Remove end-of-test packet ... ==================== Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski

samples: bpf: Fix uninitialized variable in xdp_redirect_cpu

2021-08-26T19:09:20Z

While at it, also improve help output when CPU number is greater than possible. Fixes: e531a220cc59 ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper") Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210826120910.454081-1-memxor@gmail.com

samples: pktgen: add trap SIGINT for printing execution result

2021-08-25T12:44:30Z

All pktgen samples can send indefinitely num messages per thread by setting the count option to 0(-n 0). If running sample with setting count 0 and press Ctrl-C to stop this program, the program prints the result of the execution so far. Currently, the samples besides sample{3...5} don't work properly. Because Ctrl-C stops the script, not just pktgen. This is results of samples: # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 0 Running... ctrl^C to stop ^CDevice: eth0@0 Result: OK: 569657(c569538+d118) usec, 84650 (60byte,0frags) 148597pps 71Mb/sec (71326560bps) errors: 0 # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -n 0 Running... ctrl^C to stop ^C In order to solve this, this commit adds trap SIGINT. Also, this commit changes control_c function to print_result to maintain consistency with other samples. Signed-off-by: Juhee Kang Signed-off-by: David S. Miller

samples: pktgen: fix to print when terminated normally

2021-08-25T12:44:30Z

Currently, most pktgen samples print the execution result when the program is terminated normally. However, sample03 doesn't work appropriately. This is results of samples: # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1 Running... ctrl^C to stop Device: eth0@0 Result: OK: 19(c5+d13) usec, 1 (60byte,0frags) 51762pps 24Mb/sec (24845760bps) errors: 0 # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1 Running... ctrl^C to stop The reason why it doesn't print the execution result when the program is terminated usually is that sample03 doesn't call the function which prints the result, unlike other samples. So, this commit solves this issue by calling the function before termination. Also, this commit changes control_c function to print_result to maintain consistency with other samples. Signed-off-by: Juhee Kang Signed-off-by: David S. Miller