user/sven/linux.git/scripts/kconfig/confdata.c, branch v5.4.170

kconfig: fix broken dependency in randconfig-generated .config

2020-02-24T07:36:32Z

[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ] Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5) produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y, which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency. This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the value of CONFIG_EFI is calculated. When this happens, the has_changed flag should be set. Currently, it takes the result from the last iteration. It should accumulate all the results of the loop. Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig") Reported-by: Vincenzo Frascino Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: Clear "written" flag to avoid data loss

2019-08-04T03:44:15Z

Prior to this commit, starting nconfig, xconfig or gconfig, and saving the .config file more than once caused data loss, where a .config file that contained only comments would be written to disk starting from the second save operation. This bug manifests itself because the SYMBOL_WRITTEN flag is never cleared after the first call to conf_write, and subsequent calls to conf_write then skip all of the configuration symbols due to the SYMBOL_WRITTEN flag being set. This commit resolves this issue by clearing the SYMBOL_WRITTEN flag from all symbols before conf_write returns. Fixes: 8e2442a5f86e ("kconfig: fix missing choice values in auto.conf") Cc: linux-stable # 4.19+ Signed-off-by: M. Vefa Bicakci Signed-off-by: Masahiro Yamada

kconfig: fix missing choice values in auto.conf

2019-07-17T13:37:51Z

Since commit 00c864f8903d ("kconfig: allow all config targets to write auto.conf if missing"), Kconfig creates include/config/auto.conf in the defconfig stage when it is missing. Joonas Kylmälä reported incorrect auto.conf generation under some circumstances. To reproduce it, apply the following diff: | --- a/arch/arm/configs/imx_v6_v7_defconfig | +++ b/arch/arm/configs/imx_v6_v7_defconfig | @@ -345,14 +345,7 @@ CONFIG_USB_CONFIGFS_F_MIDI=y | CONFIG_USB_CONFIGFS_F_HID=y | CONFIG_USB_CONFIGFS_F_UVC=y | CONFIG_USB_CONFIGFS_F_PRINTER=y | -CONFIG_USB_ZERO=m | -CONFIG_USB_AUDIO=m | -CONFIG_USB_ETH=m | -CONFIG_USB_G_NCM=m | -CONFIG_USB_GADGETFS=m | -CONFIG_USB_FUNCTIONFS=m | -CONFIG_USB_MASS_STORAGE=m | -CONFIG_USB_G_SERIAL=m | +CONFIG_USB_FUNCTIONFS=y | CONFIG_MMC=y | CONFIG_MMC_SDHCI=y | CONFIG_MMC_SDHCI_PLTFM=y And then, run: $ make ARCH=arm mrproper imx_v6_v7_defconfig You will see CONFIG_USB_FUNCTIONFS=y is correctly contained in the .config, but not in the auto.conf. Please note drivers/usb/gadget/legacy/Kconfig is included from a choice block in drivers/usb/gadget/Kconfig. So USB_FUNCTIONFS is a choice value. This is probably a similar situation described in commit beaaddb62540 ("kconfig: tests: test defconfig when two choices interact"). When sym_calc_choice() is called, the choice symbol forgets the SYMBOL_DEF_USER unless all of its choice values are explicitly set by the user. The choice symbol is given just one chance to recall it because set_all_choice_values() is called if SYMBOL_NEED_SET_CHOICE_VALUES is set. When sym_calc_choice() is called again, the choice symbol forgets it forever, since SYMBOL_NEED_SET_CHOICE_VALUES is a one-time aid. Hence, we cannot call sym_clear_all_valid() again and again. It is crazy to repeat set and unset of internal flags. However, we cannot simply get rid of "sym->flags &= flags | ~SYMBOL_DEF_USER;" Doing so would re-introduce the problem solved by commit 5d09598d488f ("kconfig: fix new choices being skipped upon config update"). To work around the issue, conf_write_autoconf() stopped calling sym_clear_all_valid(). conf_write() must be changed accordingly. Currently, it clears SYMBOL_WRITE after the symbol is written into the .config file. This is needed to prevent it from writing the same symbol multiple times in case the symbol is declared in two or more locations. I added the new flag SYMBOL_WRITTEN, to track the symbols that have been written. Anyway, this is a cheesy workaround in order to suppress the issue as far as defconfig is concerned. Handling of choices is totally broken. sym_clear_all_valid() is called every time a user touches a symbol from the GUI interface. To reproduce it, just add a new symbol drivers/usb/gadget/legacy/Kconfig, then touch around unrelated symbols from menuconfig. USB_FUNCTIONFS will disappear from the .config file. I added the Fixes tag since it is more fatal than before. But, this has been broken since long long time before, and still it is. We should take a closer look to fix this correctly somehow. Fixes: 00c864f8903d ("kconfig: allow all config targets to write auto.conf if missing") Cc: linux-stable # 4.19+ Reported-by: Joonas Kylmälä Signed-off-by: Masahiro Yamada Tested-by: Joonas Kylmälä

kconfig: remove meaningless if-conditional in conf_read()

2019-07-11T14:37:55Z

sym_is_choice(sym) has already been checked by previous if-block: if (sym_is_choice(sym) || (sym->flags & SYMBOL_NO_WRITE)) continue; Hence, the following code is redundant, and the comment is misleading: if (!sym_is_choice(sym)) continue; /* fall through */ It always takes 'continue', never falls though. Clean up the dead code. Signed-off-by: Masahiro Yamada

kconfig: Fix spelling of sym_is_changable

2019-07-06T12:58:23Z

There is a spelling mistake in "changable", it is corrected to "changeable" and all call sites are updated accordingly. Signed-off-by: Marco Ammon Signed-off-by: Masahiro Yamada

kconfig: require the argument of --defconfig

2019-06-09T06:08:18Z

Currently, the argument for --defconfig is optional. If the argument is not passed, the hard-coded default arch/$(ARCH)/defconfig is used. It no longer happens in Linux since the last users of the default are gone by the following commits: - Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to arch/s390/configs/defconfig") - Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig") I want to kill the Linux-specific directory path embedded in the Kconfig binary. The --savedefconfig (reverse operation of --defconfig) requires an argument, so it should not hurt to do likewise for --defconfig. Signed-off-by: Masahiro Yamada

kconfig: Terminate menu blocks with a comment in the generated config

2019-05-18T06:31:24Z

Currently menu blocks start with a pretty header but end with nothing in the generated config. So next config options stick together with the options from the menu block. Let's terminate menu blocks in the generated config with a comment and a newline if needed. Example: ... CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # CONFIG_NET_PKTGEN=y CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options CONFIG_HAMRADIO=y ... Signed-off-by: Alexander Popov Reviewed-by: Kees Cook Signed-off-by: Masahiro Yamada

kconfig: make conf_get_autoconfig_name() static

2019-05-14T14:23:25Z

This is only used in confdata.c Signed-off-by: Masahiro Yamada

kconfig: use snprintf for formatting pathnames

2019-05-14T14:23:25Z

Valid pathnames will never exceed PATH_MAX, but these file names are unsanitized and can cause buffer overflow if set incorrectly. Use snprintf to avoid this. This was flagged during a Coverity scan of the coreboot project, which also uses kconfig for its build system. Signed-off-by: Jacob Garber Signed-off-by: Masahiro Yamada

kconfig: remove useless NULL pointer check in conf_write_dep()

2019-05-14T14:23:16Z

conf_write_dep() has just one caller: conf_write_dep("include/config/auto.conf.cmd"); "name" always points to a valid string. Signed-off-by: Masahiro Yamada