user/sven/linux.git/scripts/kconfig, branch v5.4.170

kconfig: nconf: stop endless search loops

2021-05-19T08:08:23Z

[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ] If the user selects the very first entry in a page and performs a search-up operation, or selects the very last entry in a page and performs a search-down operation that will not succeed (e.g., via [/]asdfzzz[Up Arrow]), nconf will never terminate searching the page. The reason is that in this case, the starting point will be set to -1 or n, which is then translated into (n - 1) (i.e., the last entry of the page) or 0 (i.e., the first entry of the page) and finally the search begins. This continues to work fine until the index reaches 0 or (n - 1), at which point it will be decremented to -1 or incremented to n, but not checked against the starting point right away. Instead, it's wrapped around to the bottom or top again, after which the starting point check occurs... and naturally fails. My original implementation added another check for -1 before wrapping the running index variable around, but Masahiro Yamada pointed out that the actual issue is that the comparison point (starting point) exceeds bounds (i.e., the [0,n-1] interval) in the first place and that, instead, the starting point should be fixed. This has the welcome side-effect of also fixing the case where the starting point was n while searching down, which also lead to an infinite loop. OTOH, this code is now essentially all his work. Amazingly, nobody seems to have been hit by this for 11 years - or at the very least nobody bothered to debug and fix this. Signed-off-by: Mihai Moldovan Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: fix return value of do_error_if()

2020-12-30T10:51:29Z

[ Upstream commit 135b4957eac43af2aedf8e2a277b9540f33c2558 ] $(error-if,...) is expanded to an empty string. Currently, it relies on eval_clause() returning xstrdup("") when all attempts for expansion fail, but the correct implementation is to make do_error_if() return xstrdup(""). Fixes: 1d6272e6fe43 ("kconfig: add 'info', 'warning-if', and 'error-if' built-in functions") Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: qconf: fix signal connection to invalid slots

2020-08-26T08:41:04Z

[ Upstream commit d85de3399f97467baa2026fbbbe587850d01ba8a ] If you right-click in the ConfigList window, you will see the following messages in the console: QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906 QObject::connect: (sender name: 'config') Right, there is no such slot in QAction. I think this is a typo of setChecked. Due to this bug, when you toggled the menu "Option->Show Name/Range/Data" the state of the context menu was not previously updated. Fix this. Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)") Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: qconf: do not limit the pop-up menu to the first row

2020-08-26T08:41:04Z

[ Upstream commit fa8de0a3bf3c02e6f00b7746e7e934db522cdda9 ] If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: qconf: Fix a few alignment issues

2020-04-29T14:33:00Z

[ Upstream commit 60969f02f07ae1445730c7b293c421d179da729c ] There are a few items with wrong alignments. Solve them. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: fix broken dependency in randconfig-generated .config

2020-02-24T07:36:32Z

[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ] Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5) produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y, which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency. This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the value of CONFIG_EFI is calculated. When this happens, the has_changed flag should be set. Currently, it takes the result from the last iteration. It should accumulate all the results of the loop. Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig") Reported-by: Vincenzo Frascino Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: don't crash on NULL expressions in expr_eq()

2020-01-12T11:21:35Z

[ Upstream commit 272a72103012862e3a24ea06635253ead0b6e808 ] NULL expressions are taken to always be true, as implemented by the expr_is_yes() macro and by several other functions in expr.c. As such, they ought to be valid inputs to expr_eq(), which compares two expressions. Signed-off-by: Thomas Hebb Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

merge_config.sh: ignore unwanted grep errors

2019-09-04T14:12:50Z

The merge_config.sh script verifies that all the config options have their expected value in the resulting file and prints any issues as warnings. These checks aren't intended to be treated as errors given the current implementation. However, since "set -e" was added, if the grep command to look for a config option does not find it the script will then abort prematurely. Handle the case where the grep exit status is non-zero by setting ACTUAL_VAL to an empty string to restore previous functionality. Fixes: cdfca821571d ("merge_config.sh: Check error codes from make") Signed-off-by: Guillaume Tucker Acked-by: Jon Hunter Tested-by: Jon Hunter Signed-off-by: Masahiro Yamada

kbuild: change *FLAGS_.o to take the path relative to $(obj)

2019-09-04T14:12:50Z

Kbuild provides per-file compiler flag addition/removal: CFLAGS_.o CFLAGS_REMOVE_.o AFLAGS_.o AFLAGS_REMOVE_.o CPPFLAGS_.lds HOSTCFLAGS_.o HOSTCXXFLAGS_.o The is the filename of the target with its directory and suffix stripped. This syntax comes into a trouble when two files with the same basename appear in one Makefile, for example: obj-y += foo.o obj-y += dir/foo.o CFLAGS_foo.o := Here, the applies to both foo.o and dir/foo.o The real world problem is: scripts/kconfig/util.c scripts/kconfig/lxdialog/util.c Both files are compiled into scripts/kconfig/mconf, but only the latter should be given with the ncurses flags. It is more sensible to use the relative path to the Makefile, like this: obj-y += foo.o CFLAGS_foo.o := obj-y += dir/foo.o CFLAGS_dir/foo.o := At first, I attempted to replace $(basetarget) with $*. The $* variable is replaced with the stem ('%') part in a pattern rule. This works with most of cases, but does not for explicit rules. For example, arch/ia64/lib/Makefile reuses rule_as_o_S in its own explicit rules, so $* will be empty, resulting in ignoring the per-file AFLAGS. I introduced a new variable, target-stem, which can be used also from explicit rules. Signed-off-by: Masahiro Yamada Acked-by: Marc Zyngier

kbuild: remove clean-dirs syntax

2019-08-29T14:54:29Z

The only the difference between clean-files and clean-dirs is the -r option passed to the 'rm' command. You can always pass -r, and then remove the clean-dirs syntax. Signed-off-by: Masahiro Yamada