user/sven/linux.git/scripts/mod/file2alias.c, branch v4.2.4

ACPI / scan: Add support for ACPI _CLS device matching

2015-07-06T23:55:20Z

Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver acpi_match_table to match devices. However, for generic drivers, we do not want to list _HID for all supported devices. Also, certain classes of devices do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, which specifies PCI-defined class code (i.e. base-class, subclass and programming interface). This patch adds support for matching ACPI devices using the _CLS method. To support loadable module, current design uses _HID or _CID to match device's modalias. With the new way of matching with _CLS this would requires modification to the current ACPI modalias key to include _CLS. This patch appends PCI-defined class-code to the existing ACPI modalias as following. acpi::::..::: E.g: # cat /sys/devices/platform/AMDI0600:00/modalias acpi:AMDI0600:010601: where bb is th base-class code, ss is te sub-class code, and pp is the programming interface code Since there would not be _HID/_CID in the ACPI matching table of the driver, this patch adds a field to acpi_device_id to specify the matching _CLS. static const struct acpi_device_id ahci_acpi_match[] = { { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) }, {}, }; In this case, the corresponded entry in modules.alias file would be: alias acpi*:010601:* ahci_platform Acked-by: Mika Westerberg Reviewed-by: Hanjun Guo Signed-off-by: Suravee Suthikulpanit Signed-off-by: Rafael J. Wysocki

Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-06-26T22:59:26Z

Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...

mei: fix up uuid matching

2015-05-31T03:14:00Z

A previous commit, c93b76b34b4d ("mei: bus: report also uuid in module alias") caused a build error as I missed applying a needed patch to add some macros to uapi/linux/uuid.h. Instead of those additional macros, change the mei code to use the existing uuid structure directly. Fixes: c93b76b34b4d Cc: Tomas Winkler Cc: Samuel Ortiz Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

mei: bus: report also uuid in module alias

2015-05-24T18:15:54Z

In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

usb: add bus type for USB ULPI

2015-05-13T17:04:55Z

UTMI+ Low Pin Interface (ULPI) is a commonly used PHY interface for USB 2.0. The ULPI specification describes a standard set of registers which the vendors can extend for their specific needs. ULPI PHYs provide often functions such as charger detection and ADP sensing and probing. There are two major issues that the bus type is meant to tackle: Firstly, ULPI registers are accessed from the controller. The bus provides convenient method for the controller drivers to share that access with the actual PHY drivers. Secondly, there are already platforms that assume ULPI PHYs are runtime detected, such as many Intel Baytrail based platforms. They do not provide any kind of hardware description for the ULPI PHYs like separate ACPI device object that could be used to enumerate a device from. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi

MIPS: Add CDMM bus support

2015-03-31T10:04:12Z

Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in the standard Linux device model. Each device attached via CDMM is discoverable via an 8-bit type identifier and may contain a number of blocks of memory mapped registers in the CDMM region. IRQs are expected to be handled separately. Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices, all the driver callbacks take place from workqueues which are run on the right CPU for the device in question, so that the driver doesn't need to be as concerned about which CPU it is running on. Callbacks also exist for when CPUs are taken offline, so that any per-CPU resources used by the driver can be disabled so they don't get forcefully migrated. CDMM devices are created as children of the CPU device they are attached to. Any existing CDMM configuration by the bootloader will be inherited, however platforms wishing to enable CDMM should implement the weak mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver knows where it should put the CDMM region in the physical address space if the bootloader hasn't already enabled it. A mips_cdmm_early_probe() function is also provided to allow early boot or particularly low level code to set up the CDMM region and probe for a specific device type, for example early console or KGDB IO drivers for the EJTAG Fast Debug Channel (FDC) CDMM device. Signed-off-by: James Hogan Cc: Greg Kroah-Hartman Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9599/ Signed-off-by: Ralf Baechle

kbuild: trivial - use tabs for code indent where possible

2014-06-10T12:00:53Z

Signed-off-by: Masahiro Yamada Signed-off-by: Michal Marek

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2014-04-06T16:38:07Z

Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont

module: allow multiple calls to MODULE_DEVICE_TABLE() per module

2014-03-13T01:41:00Z

Commit 78551277e4df5: "Input: i8042 - add PNP modaliases" had a bug, where the second call to MODULE_DEVICE_TABLE() overrode the first resulting in not all the modaliases being exposed. This fixes the problem by including the name of the device_id table in the __mod_*_device_table alias, allowing us to export several device_id tables per module. Suggested-by: Kay Sievers Acked-by: Greg Kroah-Hartman Cc: Dmitry Torokhov Signed-off-by: Tom Gundersen Signed-off-by: Rusty Russell

x86: align x86 arch with generic CPU modalias handling

2014-02-18T20:45:38Z

The x86 CPU feature modalias handling existed before it was reimplemented generically. This patch aligns the x86 handling so that it (a) reuses some more code that is now generic; (b) uses the generic format for the modalias module metadata entry, i.e., it now uses 'cpu:type:x86,venVVVVfamFFFFmodMMMM:feature:,XXXX,YYYY' instead of the 'x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:,XXXX,YYYY' that was used before. Signed-off-by: Ard Biesheuvel Acked-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman