user/sven/linux.git/scripts/mod, branch v5.12.19

kbuild: generate Module.symvers only when vmlinux exists

2021-05-19T08:56:20Z

[ Upstream commit 69bc8d386aebbd91a6bb44b6d33f77c8dfa9ed8c ] The external module build shows the following warning if Module.symvers is missing in the kernel tree. WARNING: Symbol version dump "Module.symvers" is missing. Modules may not have dependencies or modversions. I think this is an important heads-up because the resulting modules may not work as expected. This happens when you did not build the entire kernel tree, for example, you might have prepared the minimal setups for external modules by 'make defconfig && make modules_preapre'. A problem is that 'make modules' creates Module.symvers even without vmlinux. In this case, that warning is suppressed since Module.symvers already exists in spite of its incomplete content. The incomplete (i.e. invalid) Module.symvers should not be created. This commit changes the second pass of modpost to dump symbols into modules-only.symvers. The final Module.symvers is created by concatenating vmlinux.symvers and modules-only.symvers if both exist. Module.symvers is supposed to collect symbols from both vmlinux and modules. It might be a bit confusing, and I am not quite sure if it is an official interface, but presumably it is difficult to rename it because some tools (e.g. kmod) parse it. Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2021-02-24T18:25:37Z

Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ...

Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

2021-02-23T18:15:33Z

Pull module updates from Jessica Yu: - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export types were introduced between 2006 - 2008. All the of the unused symbols have been long removed and gpl future symbols were converted to gpl quite a long time ago, and I don't believe these export types have been used ever since. So, I think it should be safe to retire those export types now (Christoph Hellwig) - Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig) - Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as it is the only caller (Christoph Hellwig) - Unexport find_module() and module_mutex and fix the last module callers to not rely on these anymore. Make module_mutex internal to the module loader (Christoph Hellwig) - Harden ELF checks on module load and validate ELF structures before checking the module signature (Frank van der Linden) - Fix undefined symbol warning for clang (Fangrui Song) - Fix smatch warning (Dan Carpenter) * tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: potential uninitialized return in module_kallsyms_on_each_symbol() module: remove EXPORT_UNUSED_SYMBOL* module: remove EXPORT_SYMBOL_GPL_FUTURE module: move struct symsearch to module.c module: pass struct find_symbol_args to find_symbol module: merge each_symbol_section into find_symbol module: remove each_symbol_in_section module: mark module_mutex static kallsyms: only build {,module_}kallsyms_on_each_symbol when required kallsyms: refactor {,module_}kallsyms_on_each_symbol module: use RCU to synchronize find_module module: unexport find_module and module_mutex drm: remove drm_fb_helper_modinit powerpc/powernv: remove get_cxl_module module: harden ELF info handling module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols

Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2021-02-23T17:28:51Z

Pull clang LTO updates from Kees Cook: "Clang Link Time Optimization. This is built on the work done preparing for LTO by arm64 folks, tracing folks, etc. This includes the core changes as well as the remaining pieces for arm64 (LTO has been the default build method on Android for about 3 years now, as it is the prerequisite for the Control Flow Integrity protections). While x86 LTO enablement is done, it depends on some pending objtool clean-ups. It's possible that I'll send a "part 2" pull request for LTO that includes x86 support. For merge log posterity, and as detailed in commit dc5723b02e52 ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO build: make LLVM=1 LLVM_IAS=1 defconfig scripts/config -e LTO_CLANG_THIN make LLVM=1 LLVM_IAS=1 (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-" and "ARCH=arm64" to the "make" command lines.) Summary: - Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen) - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)" * tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds arm64: allow LTO to be selected arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS arm64: vdso: disable LTO drivers/misc/lkdtm: disable LTO for rodata.o efi/libstub: disable LTO scripts/mod: disable LTO for empty.c modpost: lto: strip .lto from module names PCI: Fix PREL32 relocations for LTO init: lto: fix PREL32 relocations init: lto: ensure initcall ordering kbuild: lto: add a default list of used symbols kbuild: lto: merge module sections kbuild: lto: limit inlining kbuild: lto: fix module versioning kbuild: add support for Clang LTO tracing: move function tracer options to Kconfig

module: remove EXPORT_UNUSED_SYMBOL*

2021-02-08T11:28:07Z

EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the unused functionality as we generally just remove unused code anyway. Reviewed-by: Miroslav Benes Reviewed-by: Emil Velikov Signed-off-by: Christoph Hellwig Signed-off-by: Jessica Yu

module: remove EXPORT_SYMBOL_GPL_FUTURE

2021-02-08T11:28:02Z

As far as I can tell this has never been used at all, and certainly not any time recently. Reviewed-by: Miroslav Benes Reviewed-by: Emil Velikov Signed-off-by: Christoph Hellwig Signed-off-by: Jessica Yu

scripts/mod: disable LTO for empty.c

2021-01-14T16:21:09Z

With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object files. As empty.o is used for probing target properties, disable LTO for it to produce an object file instead. Signed-off-by: Sami Tolvanen Reviewed-by: Kees Cook Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20201211184633.3213045-12-samitolvanen@google.com

modpost: lto: strip .lto from module names

2021-01-14T16:21:09Z

With LTO, everything is compiled into LLVM bitcode, so we have to link each module into native code before modpost. Kbuild uses the .lto.o suffix for these files, which also ends up in module information. This change strips the unnecessary .lto suffix from the module name. Suggested-by: Bill Wendling Signed-off-by: Sami Tolvanen Reviewed-by: Kees Cook Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20201211184633.3213045-11-samitolvanen@google.com

fpga: dfl: add dfl bus support to MODULE_DEVICE_TABLE()

2021-01-07T14:21:27Z

Device Feature List (DFL) is a linked list of feature headers within the device MMIO space. It is used by FPGA to enumerate multiple sub features within it. Each feature can be uniquely identified by DFL type and feature id, which can be read out from feature headers. A dfl bus helps DFL framework modularize DFL device drivers for different sub features. The dfl bus matches its devices and drivers by DFL type and feature id. This patch adds dfl bus support to MODULE_DEVICE_TABLE() by adding info about struct dfl_device_id in devicetable-offsets.c and add a dfl entry point in file2alias.c. Acked-by: Wu Hao Signed-off-by: Xu Yilun Signed-off-by: Wu Hao Signed-off-by: Matthew Gerlach Signed-off-by: Russ Weight Signed-off-by: Moritz Fischer Link: https://lore.kernel.org/r/20210107043714.991646-6-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman

platform/surface: aggregator: Add dedicated bus and device type

2021-01-06T23:06:39Z

The Surface Aggregator EC provides varying functionality, depending on the Surface device. To manage this functionality, we use dedicated client devices for each subsystem or virtual device of the EC. While some of these clients are described as standard devices in ACPI and the corresponding client drivers can be implemented as platform drivers in the kernel (making use of the controller API already present), many devices, especially on newer Surface models, cannot be found there. To simplify management of these devices, we introduce a new bus and client device type for the Surface Aggregator subsystem. The new device type takes care of managing the controller reference, essentially guaranteeing its validity for as long as the client device exists, thus alleviating the need to manually establish device links for that purpose in the client driver (as has to be done with the platform devices). Signed-off-by: Maximilian Luz Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com Signed-off-by: Hans de Goede