user/sven/linux.git/scripts/mod, branch v5.2.3

kbuild: modversions: Fix relative CRC byte order interpretation

2019-03-28T14:46:56Z

Fix commit 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs") where CRCs are interpreted in host byte order rather than proper kernel byte order. The bug is conditional on CONFIG_MODULE_REL_CRCS. For example, when loading a BE module into a BE kernel compiled with a LE system, the error "disagrees about version of symbol module_layout" is produced. A message such as "Found checksum D7FA6856 vs module 5668FAD7" will be given with debug enabled, which indicates an obvious endian problem within __kcrctab within the kernel image. The general solution is to use the macro TO_NATIVE, as is done in similar cases throughout modpost.c. With this correction it has been verified that a BE kernel compiled with a LE system accepts BE modules. This change has also been verified with a LE kernel compiled with a LE system, in which case TO_NATIVE returns its value unmodified since the byte orders match. This is by far the common case. Fixes: 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs") Signed-off-by: Fredrik Noring Cc: stable@vger.kernel.org Signed-off-by: Masahiro Yamada

modpost: always show verbose warning for section mismatch

2019-03-13T17:39:09Z

Unless CONFIG_DEBUG_SECTION_MISMATCH is enabled, modpost only shows the number of section mismatches. If you want to know the symbols causing the issue, you need to rebuild with CONFIG_DEBUG_SECTION_MISMATCH. It is tedious. I think it is fine to show annoying warning when a new section mismatch comes in. Signed-off-by: Masahiro Yamada

Merge tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86

2019-03-10T20:16:37Z

Pull x86 platform driver updates from Darren Hart: - use MODULE_DEVICE_TABLE across several wmi drivers, keeping wmi_device_id and MODULE_ALIAS() declarations in sync - add several Ideapad models to the no_hw_rfkill list - add support for new Mellanox platforms, including new fan and LED functionality - address Dell keyboard backlight change event and power button release issues - update dell_rbu to use appropriate memory allocation mechanisms - several small fixes and Ice Lake support for intel_pmc_core - fix a suspend regression for Cherry Trail based devices in intel_int0002_vgpio - a few other routine fixes * tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits) MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list platform/x86: mlx-platform: Fix access mode for fan_dir attribute platform/x86: mlx-platform: Add UID LED for the next generation systems platform/x86: mlx-platform: Add extra CPLD for next generation systems platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE() platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h modpost: file2alias: define size of alias platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown platform/x86: intel_pmc_core: Add Package cstates residency info platform/x86: intel_pmc_core: Add ICL platform support ...

platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()

2019-03-07T16:46:29Z

The kernel provides the macro MODULE_DEVICE_TABLE() where driver authors can specify their device type and their array of device_ids and thereby trigger the generation of the appropriate MODULE_ALIAS() output. This is opposed to having to specify one MODULE_ALIAS() for each device. The WMI device type is currently not supported. While using MODULE_DEVICE_TABLE() does increase the complexity as well as spreading out the implementation across the kernel, it does come with some benefits too; * It makes different drivers look more similar; if you can specify the array of device_ids any device type specific input to MODULE_ALIAS() will automatically be generated for you. * It helps each driver avoid keeping multiple versions of the same information in sync. That is, both the array of device_ids and the potential multitude of MODULE_ALIAS()'s. Add WMI support to MODULE_DEVICE_TABLE() by adding info about struct wmi_device_id in devicetable-offsets.c and add a WMI entry point in file2alias.c. The type argument for MODULE_DEVICE_TABLE(type, name) is wmi. Suggested-by: Pali Rohár Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Acked-by: Masahiro Yamada Signed-off-by: Darren Hart (VMware)

platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h

2019-03-07T16:46:07Z

In preparation for adding WMI support to MODULE_DEVICE_TABLE() move the definition of struct wmi_device_id to mod_devicetable.h and inline guid_string in the struct. Changing guid_string to an inline char array changes the loop conditions when looping over an array of struct wmi_device_id. Therefore update wmi_dev_match()'s loop to check for an empty guid_string instead of a NULL pointer. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> [dvhart: Move UUID_STRING_LEN define to this patch] Signed-off-by: Darren Hart (VMware)

modpost: file2alias: define size of alias

2019-03-07T07:12:34Z

The size of the variable alias provided to do_entry functions are currently not readily available. Thus hindering do_entry functions to perform bounds checking. Define the macro ALIAS_SIZE containing the size of the variable alias. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Acked-by: Masahiro Yamada Signed-off-by: Darren Hart (VMware)

tee: add bus driver framework for TEE based devices

2019-02-01T14:12:46Z

Introduce a generic TEE bus driver concept for TEE based kernel drivers which would like to communicate with TEE based devices/services. Also add support in module device table for these new TEE based devices. In this TEE bus concept, devices/services are identified via Universally Unique Identifier (UUID) and drivers register a table of device UUIDs which they can support. So this TEE bus framework registers following apis: - match(): Iterates over the driver UUID table to find a corresponding match for device UUID. If a match is found, then this particular device is probed via corresponding probe api registered by the driver. This process happens whenever a device or a driver is registered with TEE bus. - uevent(): Notifies user-space (udev) whenever a new device is registered on this bus for auto-loading of modularized drivers. Also this framework allows for device enumeration to be specific to corresponding TEE implementation like OP-TEE etc. Signed-off-by: Sumit Garg Reviewed-by: Daniel Thompson Reviewed-by: Bhupesh Sharma Signed-off-by: Jens Wiklander

x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE

2019-01-09T09:35:56Z

Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao Signed-off-by: Borislav Petkov Reviewed-by: Zhenzhong Duan Reviewed-by: Masahiro Yamada Cc: "H. Peter Anvin" Cc: Andi Kleen Cc: Andrew Morton Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Daniel Borkmann Cc: David Woodhouse Cc: Geert Uytterhoeven Cc: Jessica Yu Cc: Jiri Kosina Cc: Kees Cook Cc: Konrad Rzeszutek Wilk Cc: Luc Van Oostenryck Cc: Michal Marek Cc: Miguel Ojeda Cc: Peter Zijlstra Cc: Tim Chen Cc: Vasily Gorbik Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable Cc: x86-ml Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn

kbuild: move modpost out of 'scripts' target

2018-12-01T14:09:34Z

I am eagar to build under the scripts/ directory only with $(HOSTCC), but scripts/mod/ highly depends on the $(CC) and target arch headers. That it why the 'scripts' target must depend on 'asm-generic', 'gcc-plugins', and $(autoksyms_h). Move it to the 'prepare0' stage. I know this is a cheesy workaround, but better than the current situation. Signed-off-by: Masahiro Yamada

modpost: move unresolved symbol checks to check_exports()

2018-12-01T13:21:59Z

This will fit better in check_exports() than add_versions(). Signed-off-by: Masahiro Yamada