user/sven/linux.git/scripts, branch v3.14.2

revert "kallsyms: fix absolute addresses for kASLR"

2014-03-11T00:26:20Z

Revert the recently applied 0f55159d091c ("kallsyms: fix absolute addresses for kASLR"). Kees said : This got NAKed, please don't apply -- this patch works for x86 and : ARM, but may cause problems for others: : : https://lkml.org/lkml/2014/2/24/718 It appears that Kees will be fixing all this up for 3.15. Cc: Andy Honig Cc: Kees Cook Cc: Michal Marek Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

2014-03-08T01:39:32Z

Pull ARM fixes from Russell King: "A number of ARM updates for -rc, covering mostly ARM specific code, but with one change to modpost.c to allow Thumb section mismatches to be detected. ARM changes include reporting when an attempt is made to boot a LPAE kernel on hardware which does not support LPAE, rather than just being silent about it. A number of other minor fixes are included too" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7992/1: boot: compressed: ignore bswapsdi2.S ARM: 7991/1: sa1100: fix compile problem on Collie ARM: fix noMMU kallsyms symbol filtering ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPU ARM: 7964/1: Detect section mismatches in thumb relocations ARM: 7963/1: mm: report both sections from PMD

kallsyms: fix absolute addresses for kASLR

2014-03-04T15:55:48Z

Currently symbols that are absolute addresses are incorrectly displayed in /proc/kallsyms if the kernel is loaded with kASLR. The problem was that the scripts/kallsyms.c file which generates the array of symbol names and addresses uses an relocatable value for all symbols, even absolute symbols. This patch fixes that. Several kallsyms output in different boot states for comparison: $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.nokaslr 0000000000000000 D __per_cpu_start 0000000000014280 D __per_cpu_end ffffffff810001c8 T _stext $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr1 000000001f200000 D __per_cpu_start 000000001f214280 D __per_cpu_end ffffffffa02001c8 T _stext $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr2 000000000d400000 D __per_cpu_start 000000000d414280 D __per_cpu_end ffffffff8e4001c8 T _stext $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr-fixed 0000000000000000 D __per_cpu_start 0000000000014280 D __per_cpu_end ffffffffadc001c8 T _stext Signed-off-by: Andy Honig Signed-off-by: Kees Cook Cc: Michal Marek Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression

2014-03-04T15:55:48Z

LZ4 as implemented in the kernel differs from the default method now used by the reference implementation of LZ4. Until the in-kernel method is updated to support the new default, passing the legacy flag (-l) to the compressor is necessary. Without this flag the kernel-generated, LZ4-compressed initramfs is junk. Kyungsik said: : It seems that lz4 supports legacy format with the same option as lz4c : does. Just looking at the first few bytes of lz4 compressed image, we can : see whether it is new format or not. : : It shows new format magic number without this patch. New format magic : number is 0x184d2204. : : $ hexdump -C ./initramfs_data.cpio.lz4 |more : 00000000 04 22 4d 18 64 70 b9 69 (Little Endian) : ... : : Currently kernel supports legacy format only. Signed-off-by: Daniel M. Weeks Cc: Michal Marek Acked-by: Kyungsik Lee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

of: Move testcase FDT data into drivers/of

2014-02-20T11:52:08Z

The testcase data is usable by any platform. This patch moves it into the drivers/of directory so it can be included by any architecture. Using the test cases requires manually adding #include to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not pretty though. A useful project would be to make the testcase code easier to execute. Signed-off-by: Grant Likely

ARM: 7964/1: Detect section mismatches in thumb relocations

2014-02-18T19:42:00Z

Add processing for normally encountered thumb relocation types so that section mismatches will be detected. Comment from Rusty Russell follows: Happiest for this to go through an ARM tree, so: Signed-off-by: David A. Long Acked-by: Rusty Russell Signed-off-by: Russell King

Merge tag 'usb-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2014-02-15T00:15:45Z

Pull USB fixes from Greg KH: "Here is a bunch of USB fixes for 3.14-rc3. Most of these are xhci reverts, fixing a bunch of reported issues with USB 3 host controller issues that loads of people have been hitting (with the exception of kernel developers, all of our machines seem to be working fine, which is why these took so long to get resolved...) There are some other minor fixes and new device ids, as ususal. All have been in linux-next successfully" * tag 'usb-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: option: blacklist ZTE MF667 net interface Revert "usb: xhci: Link TRB must not occur within a USB payload burst" Revert "xhci: Avoid infinite loop when sg urb requires too many trbs" Revert "xhci: Set scatter-gather limit to avoid failed block writes." xhci 1.0: Limit arbitrarily-aligned scatter gather. Modpost: fixed USB alias generation for ranges including 0x9 and 0xA usb: core: Fix potential memory leak adding dyn USBdevice IDs USB: ftdi_sio: add Tagsys RFID Reader IDs usb: qcserial: add Netgear Aircard 340U usb-storage: enable multi-LUN scanning when needed USB: simple: add Dynastream ANT USB-m Stick device support usb-storage: add unusual-devs entry for BlackBerry 9000 usb-storage: restrict bcdDevice range for Super Top in Cypress ATACB usb: phy: move some error messages to debug usb: ftdi_sio: add Mindstorms EV3 console adapter usb: dwc2: fix memory corruption in dwc2 driver usb: dwc2: fix role switch breakage usb: dwc2: bail out early when booting with "nousb" Revert "xhci: replace xhci_read_64() with readq()" Revert "xhci: replace xhci_write_64() with writeq()" ...

checkpatch: fix detection of git repository

2014-02-11T00:01:40Z

Since git v1.7.7, the .git directory can be a file when, for example, the kernel is a submodule of another git super project. So, the check "-d .git" is not working anymore in this case. Using a more generic check like "-e .git" corrects this behaviour. Signed-off-by: Richard Genoud Cc: Andy Whitcroft Cc: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

get_maintainer: fix detection of git repository

2014-02-11T00:01:40Z

Modpost: fixed USB alias generation for ranges including 0x9 and 0xA

2014-02-07T19:26:35Z

Commit afe2dab4f6 ("USB: add hex/bcd detection to usb modalias generation") changed the routine that generates alias ranges. Before that change, only digits 0-9 were supported; the commit tried to fix the case when the range includes higher values than 0x9. Unfortunately, the commit didn't fix the case when the range includes both 0x9 and 0xA, meaning that the final range must look like [x-9A-y] where x <= 0x9 and y >= 0xA -- instead the [x-9A-x] range was produced. Modprobe doesn't complain as it sees no difference between no-match and bad-pattern results of fnmatch(). Fixing this simple bug to fix the aliases. Also changing the hardcoded beginning of the range to uppercase as all the other letters are also uppercase in the device version numbers. Fortunately, this affects only the dvb-usb-dib0700 module, AFAIK. Signed-off-by: Jan Moskyto Matejka Cc: stable Signed-off-by: Greg Kroah-Hartman