user/sven/linux.git/scripts, branch v3.2.70

scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore

2015-02-20T00:49:38Z

commit 1caf6aaaa47471831d77c75f094d4e00ad1ec808 upstream. Compiling SH with gcc-4.8 fails due to the -m32 option not being supported. From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783 CC init/main.o gcc-4.8: error: unrecognized command line option '-m32' ld: cannot find init/.tmp_mc_main.o: No such file or directory objcopy: 'init/.tmp_mx_main.o': No such file rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de Cc: Matt Fleming Reported-by: John Paul Adrian Glaubitz Signed-off-by: Michael Karcher Signed-off-by: Steven Rostedt Signed-off-by: Ben Hutchings

recordmcount/MIPS: Fix possible incorrect mcount_loc table entries in modules

2014-07-11T12:33:55Z

commit 91ad11d7cc6f4472ebf177a6252fbf0fd100d798 upstream. On MIPS calls to _mcount in modules generate 2 instructions to load the _mcount address (and therefore 2 relocations). The mcount_loc table should only reference the first of these, so the second is filtered out by checking the relocation offset and ignoring ones that immediately follow the previous one seen. However if a module has an _mcount call at offset 0, the second relocation would not be filtered out due to old_r_offset == 0 being taken to mean that the current relocation is the first one seen, and both would end up in the mcount_loc table. This results in ftrace_make_nop() patching both (adjacent) instructions to branches over the _mcount call sequence like so: 0xffffffffc08a8000: 04 00 00 10 b 0xffffffffc08a8014 0xffffffffc08a8004: 04 00 00 10 b 0xffffffffc08a8018 0xffffffffc08a8008: 2d 08 e0 03 move at,ra ... The second branch is in the delay slot of the first, which is defined to be unpredictable - on the platform on which this bug was encountered, it triggers a reserved instruction exception. Fix by initializing old_r_offset to ~0 and using that instead of 0 to determine whether the current relocation is the first seen. Signed-off-by: Alex Smith Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7098/ Signed-off-by: Ralf Baechle Signed-off-by: Ben Hutchings

powerpc: Add vr save/restore functions

2014-06-09T12:28:54Z

commit 8fe9c93e7453e67b8bd09f263ec1bb0783c733fc upstream. GCC 4.8 now generates out-of-line vr save/restore functions when optimizing for size. They are needed for the raid6 altivec support. Signed-off-by: Andreas Schwab Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Ben Hutchings

deb-pkg: Fix cross-building linux-headers package

2014-04-09T01:20:45Z

commit f8ce239dfc7ba9add41d9ecdc5e7810738f839fa upstream. builddeb generates a control file that says the linux-headers package can only be built for the build system primary architecture. This breaks cross-building configurations. We should use $debarch for this instead. Since $debarch is not yet set when generating the control file, set Architecture: any and use control file variables to fill in the description. Fixes: cd8d60a20a45 ('kbuild: create linux-headers package in deb-pkg') Reported-and-tested-by: "Niew, Sh." Signed-off-by: Ben Hutchings Signed-off-by: Michal Marek

deb-pkg: Fix building for MIPS big-endian or ARM OABI

2014-04-09T01:20:45Z

commit c5e318f67eebbad491615a752c51dbfde7dc3d78 upstream. These commands will mysteriously fail: $ make ARCH=arm versatile_defconfig [...] $ make ARCH=arm deb-pkg [...] make[1]: *** [deb-pkg] Error 1 make: *** [deb-pkg] Error 2 The Debian architecture selection for these kernel architectures does 'grep FOO=y $KCONFIG_CONFIG && echo bar', and after 'set -e' this aborts the script if grep does not find the given config symbol. Fixes: 10f26fa64200 ('build, deb-pkg: select userland architecture based on UTS_MACHINE') Signed-off-by: Ben Hutchings Signed-off-by: Michal Marek

deb-pkg: use KCONFIG_CONFIG instead of .config file directly

2014-04-09T01:20:45Z

commit d20917670ee1fd4b090555e551faea04b014ca97 upstream. Signed-off-by: Anisse Astier Reviewed-by: Ben Hutchings Signed-off-by: Michal Marek [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

Modpost: fixed USB alias generation for ranges including 0x9 and 0xA

2014-04-01T23:58:50Z

commit 03b56329f9bb5a1cb73d7dc659d529a9a9bf3acc upstream. Commit afe2dab4f6 ("USB: add hex/bcd detection to usb modalias generation") changed the routine that generates alias ranges. Before that change, only digits 0-9 were supported; the commit tried to fix the case when the range includes higher values than 0x9. Unfortunately, the commit didn't fix the case when the range includes both 0x9 and 0xA, meaning that the final range must look like [x-9A-y] where x <= 0x9 and y >= 0xA -- instead the [x-9A-x] range was produced. Modprobe doesn't complain as it sees no difference between no-match and bad-pattern results of fnmatch(). Fixing this simple bug to fix the aliases. Also changing the hardcoded beginning of the range to uppercase as all the other letters are also uppercase in the device version numbers. Fortunately, this affects only the dvb-usb-dib0700 module, AFAIK. Signed-off-by: Jan Moskyto Matejka Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

kernel-doc: bugfix - multi-line macros

2013-10-26T20:06:10Z

commit 654784284430bf2739985914b65e09c7c35a7273 upstream. Prior to this patch the following code breaks: /** * multiline_example - this breaks kernel-doc */ #define multiline_example( \ myparam) Producing this error: Error(somefile.h:983): cannot understand prototype: 'multiline_example( \ ' This patch fixes the issue by appending all lines ending in a blackslash (optionally followed by whitespace), removing the backslash and any whitespace after it prior to appending (just like the C pre-processor would). This fixes a break in kerel-doc introduced by the additions to rbtree.h. Signed-off-by: Daniel Santos Cc: Randy Dunlap Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings

kbuild: make: fix if_changed when command contains backslashes

2012-10-17T02:49:34Z

commit c353acba28fb3fa1fd05fd6b85a9fc7938330f9c upstream. The call if_changed mechanism does not work when the command contains backslashes. This basically is an issue with lzo and bzip2 compressed kernels. The compressed binaries do not contain the uncompressed image size, so these use size_append to append the size. This results in backslashes in the executed command. With this if_changed always detects a change in the command and rebuilds the compressed image even if nothing has changed. Fix this by escaping backslashes in make-cmd Signed-off-by: Sascha Hauer Signed-off-by: Jan Luebbe Cc: Sam Ravnborg Cc: Bernhard Walle Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings

kbuild: Fix gcc -x syntax

2012-10-17T02:49:27Z

commit b1e0d8b70fa31821ebca3965f2ef8619d7c5e316 upstream. The correct syntax for gcc -x is "gcc -x assembler", not "gcc -xassembler". Even though the latter happens to work, the former is what is documented in the manual page and thus what gcc wrappers such as icecream do expect. This isn't a cosmetic change. The missing space prevents icecream from recognizing compilation tasks it can't handle, leading to silent kernel miscompilations. Besides me, credits go to Michael Matz and Dirk Mueller for investigating the miscompilation issue and tracking it down to this incorrect -x parameter syntax. Signed-off-by: Jean Delvare Acked-by: Ingo Molnar Cc: Bernhard Walle Cc: Michal Marek Cc: Ralf Baechle Signed-off-by: Michal Marek [bwh: Backported to 3.2: drop unneeded change to arch/x86/Makefile] Signed-off-by: Ben Hutchings