user/sven/linux.git/scripts, branch v4.14.73

kbuild: add .DELETE_ON_ERROR special target

2018-09-26T06:37:59Z

[ Upstream commit 9c2af1c7377a8a6ef86e5cabf80978f3dbbb25c0 ] If Make gets a fatal signal while a shell is executing, it may delete the target file that the recipe was supposed to update. This is needed to make sure that it is remade from scratch when Make is next run; if Make is interrupted after the recipe has begun to write the target file, it results in an incomplete file whose time stamp is newer than that of the prerequisites files. Make automatically deletes the incomplete file on interrupt unless the target is marked .PRECIOUS. The situation is just the same as when the shell fails for some reasons. Usually when a recipe line fails, if it has changed the target file at all, the file is corrupted, or at least it is not completely updated. Yet the file’s time stamp says that it is now up to date, so the next time Make runs, it will not try to update that file. However, Make does not cater to delete the incomplete target file in this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile to request it. scripts/Kbuild.include seems a suitable place to add it because it is included from almost all sub-makes. Please note .DELETE_ON_ERROR is not effective for phony targets. The external module building should never ever touch the kernel tree. The following recipe fails if include/generated/autoconf.h is missing. However, include/config/auto.conf is not deleted since it is a phony target. PHONY += include/config/auto.conf include/config/auto.conf: $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or $@ are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

kbuild: make missing $DEPMOD a Warning instead of an Error

2018-09-15T07:45:36Z

commit 914b087ff9e0e9a399a4927fa30793064afc0178 upstream. When $DEPMOD is not found, only print a warning instead of exiting with an error message and error status: Warning: 'make modules_install' requires /sbin/depmod. Please install it. This is probably in the kmod package. Change the Error to a Warning because "not all build hosts for cross compiling Linux are Linux systems and are able to provide a working port of depmod, especially at the file patch /sbin/depmod." I.e., "make modules_install" may be used to copy/install the loadable modules files to a target directory on a build system and then transferred to an embedded device where /sbin/depmod is run instead of it being run on the build system. Fixes: 934193a654c1 ("kbuild: verify that $DEPMOD is installed") Signed-off-by: Randy Dunlap Reported-by: H. Nikolaus Schaller Cc: stable@vger.kernel.org Cc: Lucas De Marchi Cc: Lucas De Marchi Cc: Michal Marek Cc: Jessica Yu Cc: Chih-Wei Huang Signed-off-by: Masahiro Yamada Signed-off-by: Maxim Zhukov Signed-off-by: Greg Kroah-Hartman

scripts: modpost: check memory allocation results

2018-09-15T07:45:27Z

[ Upstream commit 1f3aa9002dc6a0d59a4b599b4fc8f01cf43ef014 ] Fix missing error check for memory allocation functions in scripts/mod/modpost.c. Fixes kernel bugzilla #200319: https://bugzilla.kernel.org/show_bug.cgi?id=200319 Signed-off-by: Randy Dunlap Cc: Yuexing Wang Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

gcc-plugins: Use dynamic initializers

2018-09-05T07:26:42Z

commit b86729109c5fd0a480300f40608aac68764b5adf upstream. GCC 8 changed the order of some fields and is very picky about ordering in static initializers, so instead just move to dynamic initializers, and drop the redundant already-zero field assignments. Suggested-by: Valdis Kletnieks Signed-off-by: Kees Cook Cc: Lance Albertson Signed-off-by: Greg Kroah-Hartman

gcc-plugins: Add include required by GCC release 8

2018-09-05T07:26:42Z

commit 80d172431696482d9acd8d2c4ea78fed8956e2a1 upstream. GCC requires another #include to get the gcc-plugins to build cleanly. Signed-off-by: Valdis Kletnieks Signed-off-by: Kees Cook Cc: Lance Albertson Signed-off-by: Greg Kroah-Hartman

kconfig: fix line numbers for if-entries in menu tree

2018-08-24T11:09:06Z

[ Upstream commit b2d00d7c61c84edd150310af3f556f8a3c6e2e67 ] The line numers for if-entries in the menu tree are off by one or more lines which is confusing when debugging for correctness of unrelated changes. According to the git log, commit a02f0570ae201c49 (kconfig: improve error handling in the parser) was the last one that changed that part of the parser and replaced "if_entry: T_IF expr T_EOL" by "if_entry: T_IF expr nl" but the commit message does not state why this has been done. When reverting that part of the commit, only the line numers are corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise the menu tree remains unchanged (checked with zconfdump() enabled in conf.c). An example for the corrected line numbers: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:4:if drivers/soc/tegra/Kconfig:6:if changes to: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:1:if drivers/soc/tegra/Kconfig:4:if Signed-off-by: Dirk Gouders Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

kbuild: verify that $DEPMOD is installed

2018-08-17T19:01:10Z

commit 934193a654c1f4d0643ddbf4b2529b508cae926e upstream. Verify that 'depmod' ($DEPMOD) is installed. This is a partial revert of commit 620c231c7a7f ("kbuild: do not check for ancient modutils tools"). Also update Documentation/process/changes.rst to refer to kmod instead of module-init-tools. Fixes kernel bugzilla #198965: https://bugzilla.kernel.org/show_bug.cgi?id=198965 Signed-off-by: Randy Dunlap Cc: Lucas De Marchi Cc: Lucas De Marchi Cc: Michal Marek Cc: Jessica Yu Cc: Chih-Wei Huang Cc: stable@vger.kernel.org # any kernel since 2012 Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

Kbuild: fix # escaping in .cmd files for future Make

2018-07-11T14:29:21Z

commit 9564a8cf422d7b58f6e857e3546d346fa970191e upstream. I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap Signed-off-by: Rasmus Villemoes Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

kconfig: Avoid format overflow warning from GCC 8.1

2018-06-11T20:49:18Z

commit 2ae89c7a82ea9d81a19b4fc2df23bef4b112f24e upstream. In file included from scripts/kconfig/zconf.tab.c:2485: scripts/kconfig/confdata.c: In function ‘conf_write’: scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(newname, "%s%s", dirname, basename); ^~ scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes sprintf(newname, "%s%s", dirname, basename); ^~~~~~ scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097 sprintf(newname, "%s%s", dirname, basename); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~ scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097 sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Increase the size of tmpname and newname to make GCC happy. Signed-off-by: Nathan Chancellor Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

builddeb: Fix header package regarding dtc source links

2018-05-30T05:52:21Z

[ Upstream commit f8437520704cfd9cc442a99d73ed708a3cdadaf9 ] Since d5d332d3f7e8, a couple of links in scripts/dtc/include-prefixes are additionally required in order to build device trees with the header package. Signed-off-by: Jan Kiszka Reviewed-by: Riku Voipio Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman