user/sven/linux.git/scripts, branch v5.9.8

scripts/setlocalversion: make git describe output more reliable

2020-11-01T11:47:02Z

commit 548b8b5168c90c42e88f70fcf041b4ce0b8e7aa8 upstream. When building for an embedded target using Yocto, we're sometimes observing that the version string that gets built into vmlinux (and thus what uname -a reports) differs from the path under /lib/modules/ where modules get installed in the rootfs, but only in the length of the -gabc123def suffix. Hence modprobe always fails. The problem is that Yocto has the concept of "sstate" (shared state), which allows different developers/buildbots/etc. to share build artifacts, based on a hash of all the metadata that went into building that artifact - and that metadata includes all dependencies (e.g. the compiler used etc.). That normally works quite well; usually a clean build (without using any sstate cache) done by one developer ends up being binary identical to a build done on another host. However, one thing that can cause two developers to end up with different builds [and thus make one's vmlinux package incompatible with the other's kernel-dev package], which is not captured by the metadata hashing, is this `git describe`: The output of that can be affected by (1) git version: before 2.11 git defaulted to a minimum of 7, since 2.11 (git.git commit e6c587) the default is dynamic based on the number of objects in the repo (2) hence even if both run the same git version, the output can differ based on how many remotes are being tracked (or just lots of local development branches or plain old garbage) (3) and of course somebody could have a core.abbrev config setting in ~/.gitconfig So in order to avoid `uname -a` output relying on such random details of the build environment which are rather hard to ensure are consistent between developers and buildbots, make sure the abbreviated sha1 always consists of exactly 12 hex characters. That is consistent with the current rule for -stable patches, and is almost always enough to identify the head commit unambigously - in the few cases where it does not, the v5.4.3-00021- prefix would certainly nail it down. Signed-off-by: Rasmus Villemoes Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n

2020-10-29T09:11:55Z

[ Upstream commit bac977cbc0d6731fb8e67c2be0e4acbd959e10b3 ] Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost"), with CONFIG_MODULES disabled, "make deb-pkg" (or "make bindeb-pkg") fails with: find: ‘Module.symvers’: No such file or directory If CONFIG_MODULES is disabled, it doesn't really make sense to build the linux-headers package. Fixes: 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost") Reported-by: Josh Triplett Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

scripts/spelling.txt: fix malformed entry

2020-10-03T18:28:12Z

One of the entries has three fields "mistake||correction||correction" rather than the expected two fields "mistake||correction". Fix it. Signed-off-by: Eric Biggers Signed-off-by: Andrew Morton Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org Signed-off-by: Linus Torvalds

Merge tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-09-30T00:56:30Z

Pull devicetree fixes from Rob Herring: - Fix handling of HOST_EXTRACFLAGS for dtc - Several warning fixes for DT bindings * tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting dt-bindings: Fix 'reg' size issues in zynqmp examples ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding dt-bindings: crypto: sa2ul: fix a DT binding check warning

scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting

2020-09-29T20:48:08Z

When building with $ HOST_EXTRACFLAGS=-g make the expectation is that host tools are built with debug informations. This however doesn't happen if the Makefile assigns a new value to the HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for the first assignment. Fixes: e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile") Signed-off-by: Uwe Kleine-König Signed-off-by: Rob Herring

scripts/kallsyms: skip ppc compiler stub .long_branch. / .plt_branch.

2020-09-24T15:41:54Z

PowerPC allmodconfig often fails to build as follows: LD .tmp_vmlinux.kallsyms1 KSYM .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 KSYM .tmp_vmlinux.kallsyms2.o LD .tmp_vmlinux.kallsyms3 KSYM .tmp_vmlinux.kallsyms3.o LD vmlinux SORTTAB vmlinux SYSMAP System.map Inconsistent kallsyms data Try make KALLSYMS_EXTRA_PASS=1 as a workaround make[2]: *** [../Makefile:1162: vmlinux] Error 1 Setting KALLSYMS_EXTRA_PASS=1 does not help. This is caused by the compiler inserting stubs such as *.long_branch.* and *.plt_branch.* $ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2 [ snip ] c00000000210c010 t 00000075.plt_branch.da9:19 c00000000210c020 t 00000075.plt_branch.1677:5 c00000000210c030 t 00000075.long_branch.memmove c00000000210c034 t 00000075.plt_branch.9e0:5 c00000000210c044 t 00000075.plt_branch.free_initrd_mem ... Actually, the problem mentioned in scripts/link-vmlinux.sh comments; "In theory it's possible this results in even more stubs, but unlikely" is happening here, and ends up with another kallsyms step required. scripts/kallsyms.c already ignores various compiler stubs. Let's do similar to make kallsysms for PowerPC always succeed in 2 steps. Reported-by: Guenter Roeck Signed-off-by: Masahiro Yamada Tested-by: Guenter Roeck

kconfig: qconf: revive help message in the info view

2020-09-20T03:58:54Z

Since commit 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view"), the help message is no longer displayed. I intended to drop duplicated "Symbol:", "Type:", but precious info about help and reverse dependencies was lost too. Revive it now. "defined at" is contained in menu_get_ext_help(), so I made sure to not display it twice. Fixes: 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view") Reported-by: Maxim Levitsky Signed-off-by: Masahiro Yamada

kconfig: qconf: fix incomplete type 'struct gstr' warning

2020-09-20T03:58:49Z

"make HOSTCXX=clang++ xconfig" reports the following: HOSTCXX scripts/kconfig/qconf.o In file included from scripts/kconfig/qconf.cc:23: In file included from scripts/kconfig/lkc.h:15: scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage] struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head); ^ Currently, get_relations_str() is declared before the struct gstr definition. Move all declarations of menu.c functions below. BTW, some are declared in lkc.h and some in lkc_proto.h, but the difference is unclear. I guess some refactoring is needed. Signed-off-by: Masahiro Yamada Acked-by: Boris Kolpackov

kconfig: qconf: use delete[] instead of delete to free array (again)

2020-09-18T15:12:13Z

Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") fixed two lines, but there is one more. (cppcheck does not report it for some reason...) This was detected by Clang. "make HOSTCXX=clang++ xconfig" reports the following: scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete] delete data; ^ [] scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here char *data = new char[count + 1]; ^ Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers

Merge tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-09-13T15:52:21Z

Pull char / misc driver fixes from Greg KH: "Here are a number of small driver fixes for 5.9-rc5 Included in here are: - habanalabs driver fixes - interconnect driver fixes - soundwire driver fixes - dyndbg fixes for reported issues, and then reverts to fix it all up to a sane state. - phy driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "dyndbg: accept query terms like file=bar and module=foo" Revert "dyndbg: fix problem parsing format="foo bar"" scripts/tags.sh: exclude tools directory from tags generation video: fbdev: fix OOB read in vga_8planes_imageblit() dyndbg: fix problem parsing format="foo bar" dyndbg: refine export, rename to dynamic_debug_exec_queries() dyndbg: give %3u width in pr-format, cosmetic only interconnect: qcom: Fix small BW votes being truncated to zero soundwire: fix double free of dangling pointer interconnect: Show bandwidth for disabled paths as zero in debugfs habanalabs: fix report of RAZWI initiator coordinates habanalabs: prevent user buff overflow phy: omap-usb2-phy: disable PHY charger detect phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init soundwire: bus: fix typo in comment on INTSTAT registers phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe() phy: qualcomm: fix platform_no_drv_owner.cocci warnings